Biogas is increasingly used for fuel in for example vehicles and it´s produced in a biogas processconsisting of the steps of pretreatment, digestion and gas cleaning. The pretreatment is a method usedto increase the gas production and / or destroy pathogens. The digestion is the stage when anaerobicmicroorganisms convert bio-mass of a substrate to a raw gas containing about 65% of methane. Thegas cleaning is used to increase the methane content to about 97% so the gas can be used for motors invehicles. The biogas part of the Ekeby sewage plant in Eskilstuna is using multiple substrates.

Land consolidation is a major problem in many countries in Europe. In Sweden, mainly the state of Dalarna, there is a strong consolidation of forestland, probably the strongest in all of Europe. The consolidation is a big obstacle for forest management and ownership questions due to the often long and narrow strips of land. One of the main reasons for land consolidation in Dalarna results from the heritage procedure, were land is divided between all of the inheritors. To improve the consolidation large surveys in the consolidated villages in Dalarna are carried out. Many laws have to be followed due to the survey.

Främsta anledningen till en tilläggsisolering är att det önskas bättre energihushållning i en byggnad. Detta kan göras med olika material och olika tekniker. Inom byggnadsvårdssammanhang förs det en diskussion om de fuktbuffrande materialen är bättre vid tilläggsisolering då de är hygroskopiska än de icke hygroskopiska som är mest frekvent använda i det konventionella byggandet. Denna rapport utvärderar om det finns några dokumenterade fakta som styrker att de hygroskopiska och ekologiska materialen fungerar bättre i byggnadsvårdssammanhang än de icke hygroskopiska. Olika isolermaterial från de två nämnda grupperna jämförs utifrån olika parametrar..

Today the human being see energy as a matter of course but the resources that is used for extract energy is today not enough for the world demand. Of all the energy that is used in Sweden today approximately 40 % goes to the building stock. This number will most likely increase if not necessary actions will be made on the already existing building stock since new houses constantly are built which will be added up on the already existing energy supply. This takes cause of action on the already existing building stocks, to fulfill the demands of the future use of energy that has been set by the authority. At the same time the thermal conditions cannot be influenced by the necessary changes that must be made.

Introduction: Every year about 450 women in Sweden are diagnosed with cervical cancer, almost 200 die and thousands undergo surgery because of cell changes in the cervix. A HPV infection can lead to cervical cancer and therefor costs for the society. The implementation of a vaccination program against HPV is a way to avoid these costs. Aim: The study aimed to calculate the economic impact of the HPV- vaccination program for children in Sweden through a cost-benefit analysis. Method: In this analysis, status quo was compared with non-administration of the HPV-vaccine for the selected cohort of ten-years-old girls in Sweden.

In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

Increased energy consumption in the world has created an increased supply of various fuels, especially fossil fuels. The Swedish government has set up various energy targets for 2020. To reach these goals it?s important to increase the energy efficiency in local buildings such as schools. This work illustrates the breakdown between energy supply and energy losses over the school.

Background: Insufficient nutritional support is associated with prolonged hospitalisation, impaired wound healing and impaired survival for patients in intensive care. In severe sepsis and septic chock, calculation of nutritional need is complicated since the metabolism is affected by decease. Aim: The aim of the study was to investigate nutritional support and to examine the quality of nursing documentation of nutritional status and nutritional support in patient records in severe sepsis and septic chock.  Method: The study was conducted as a retrospective investigation where 64 patient records were studied. The quality of documentation was examined in 10 patient records using an examinational model.Findings: Calculation of average nutritional support showed insufficient supply particularly in the two first days of intensive care. During the next five days nutritional supply was higher but individual variation was seen, why a clear picture of nutritional support is hard to detect.

Dagsljus i byggnader är viktigt för både den fysiska och psykiska hälsan. Dagsljusinsläpp i byggnader sker genom fönster, men fönster är även den byggnadskomponent som medför störst energiförluster i en byggnad. Därför finns det problem i att skapa en god balans mellan utformning, energieffektivisering och termisk komfort samtidigt som ett tillfredsställande dagsljus ska tillämpas i byggnader där människor vistas.Detta examensarbete som omfattar 15 hp syftar till att effektivisera samt förenkla bedömningen av ett tillfredsställande dagsljus, för att uppnå kraven i miljöcertifieringsmetoden Miljöbyggnad, där även intilliggande faktorer som energi och termiskt klimat studeras. Målet var att upprätta ett förprojekteringsverktyg för indikatorn Dagsljus som i framtiden kan användas av konsulter, arkitekter och andra inom byggbranschen när en byggnad ska miljöcertifieras enligt metoden Miljöbyggnad. För att skapa verktyget gjordes datamodeller av testrum med olika förutsättningar, där dagsljusfaktorn, DF, kontrollerades.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

Oxygen consumption and carbon dioxide production are usual measurements within the sports and training physiology. The same measurements are also common when it comes to establish the amount of energy that is used during work and to establish the intensity of work. The volume of oxygen that is consumed contra the volume of carbon dioxide that is produced can be used to calculate the metabolic rate within the human body. This calculation shows the percent relationship between carbohydrates and fat in the metabolism. The first accurate method to measure the breathing gases for use in metabolic calculation was established in the early twenty century when the Douglas bag method was introduced.

The object with this work was to create a simple feeding program for beef cows. Another object was that I could learn more about the properties and functions of Excel and Visual Basic. I used parts of a program I designed a few years ago. This old program was neither user friendly nor had it an appealing layout. Initially I decided how I wanted the new program to appear and on which foundation it should be built. I designed various forms into a spread sheet, such as lists and multiple choice buttons. Using VBA (Visual Basic for Application) I could create macros, which used the information chosen in the lists and with the multiple choices to calculate the feeding requirement or the feeding plan.

This master thesis deals with steel girders subjected to patch loading caused by concentrated moments. There exist no good methods to calculate by hand the ultimate resistance for this load case. In ?tunnplåtshandboken?, (Handbook for sheet metal, which is published by SSAB), one calculation method is presented. It?s however fairly difficult to use, because of many calculation steps and many graphs.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

Problems: How does Volvos CE: s four Swedish plants work with investment appraisals? Does the work differ between the plants? If differences exist, what can be improved in order to make the work more uniform?  Purpose: To map the work with investment appraisals at Volvo CE: s four Swedish plats, to analyze differences in work between the plants and give proposals to a more homogenous working.Method: A method of qualitative nature. The study mainly contains raw data from semi structured interviews. Secondary data, such as internal policy documents and documentation of completed investment projects, has supplemented the raw data. Analysis: The mapping shows significant differences in work with investments between Volvo CE: s Swedish plants.