Sökresultat:
227 Uppsatser om Thermal cracks - Sida 12 av 16
Utvärdering av möjligheten att tillvarata energi ur processvatten : En undersökning gjort vid Olofsfors AB på uppdrag av UMIA AB.
The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.
Uppgradering av automatisk teststation
The climate changes that are occuring in the world have resulted in that the EU callingfor a 20 % reduction in energy consumption to the year 2020, to reach that goal theEU want the public sector to go forth as a good example. Västfastigheter owns andmanage the hospital buildings in the Västra Götaland region. To be able to reducetheir energy usage Västfastigheter has hired several consulting firms to chart out theenergy consumption on each hospital building. The biggest energy savings potentialhave been calculated and what the cost will be to perform each action. The energyaudit have been completed and stand as the decision basis for Västfastigheter?s choiceon which action packages that should be implemented.
Kan evidensbaserad design användas i upprustningen av miljonprogrammet?
Between 1965 and 1975 a major housing project was carried out in Sweden to resolve a major housing crisis, the so-called one million housing program (Swedish: miljonprogrammet). To raise the standards and create a more attractive housing in these areas is currently a very relevant topic in Sweden.Evidence-based design is the process of basing decisions of the built environment on credible research and studies to achieve the best possible outcome. This method is primarily used in the healthcare sector to improve quality of care and reduce costs by creating healthy environments.The possibility of refurbish apartment buildings from miljonprogrammet using evidence-based design has been studied by means of an extensive literature review and a closer examination of the residential area, Husby in Stockholm, which has been chosen to represent the miljonprogrammet in its entirety. Furthermore, the evidence-based research has been limited to seven fields; nature, noise, color, wayfinding, safe environment, daylight and thermal comfort which has been assessed to be applicable on housing. In order to obtain a comprehensive overview of the different fields, four different subjects were chosen to investigate further within each field; research and studies, laws and regulations, constructional aspect and Husby.
Projekteringsförslag för JM AB av fastighet 3:2 i Bukärr, Särö
The climate changes that are occuring in the world have resulted in that the EU callingfor a 20 % reduction in energy consumption to the year 2020, to reach that goal theEU want the public sector to go forth as a good example. Västfastigheter owns andmanage the hospital buildings in the Västra Götaland region. To be able to reducetheir energy usage Västfastigheter has hired several consulting firms to chart out theenergy consumption on each hospital building. The biggest energy savings potentialhave been calculated and what the cost will be to perform each action. The energyaudit have been completed and stand as the decision basis for Västfastigheter?s choiceon which action packages that should be implemented.
Termisk analys av kompakta jordvärmesystem - Sensitivitetsanalys och korrektions faktorer baserat på fältmätningar i referensanläggningar i Östergötland
Chapter 1 defines the aim of the project and gives a general orientation about ground heat extractors. In chapter 2 physical processes that could be expected to be involved in the heat transport around a ground heat exchanger are discussed. It is shown from a literature study what amount of moisture transport due to thermal gradients there could be expected in a ground heat exchanger. The conclusion is drawn that the moisture gradient (Sr) is of same magnitude as the driving temperature gradient (°C). At the expected amount of increased moisture around the pipes the moisture transport could be considered to have a little effect on the brine temperature.
Köldbryggors inverkan på isoleringsegenskaper för sandwichelement : Anslutning mellan fönster och yttervägg
I dagens läge har energifrågorna väckt ett stort intresse i samhället. Nu fokuseras det mer på att bygga energisnålare hus. En betydande faktor som påverkar energiförbrukningen i våra hus är köldbryggor. De uppstår då ett material med dålig värmeisolering bryter igenom ett material med bättre värmeisolering. Köldbryggor är nästan omöjligt att undvika, dock går alltid att reducera.
Styrsystem för testriggar till linjära aktuatorer
The climate changes that are occuring in the world have resulted in that the EU callingfor a 20 % reduction in energy consumption to the year 2020, to reach that goal theEU want the public sector to go forth as a good example. Västfastigheter owns andmanage the hospital buildings in the Västra Götaland region. To be able to reducetheir energy usage Västfastigheter has hired several consulting firms to chart out theenergy consumption on each hospital building. The biggest energy savings potentialhave been calculated and what the cost will be to perform each action. The energyaudit have been completed and stand as the decision basis for Västfastigheter?s choiceon which action packages that should be implemented.
Styrsystem : För en forskningsutrustning
The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.
Flödet av elektrisk och elektronisk apparatur i Sverige 1995 - 2011
The climate changes that are occuring in the world have resulted in that the EU callingfor a 20 % reduction in energy consumption to the year 2020, to reach that goal theEU want the public sector to go forth as a good example. Västfastigheter owns andmanage the hospital buildings in the Västra Götaland region. To be able to reducetheir energy usage Västfastigheter has hired several consulting firms to chart out theenergy consumption on each hospital building. The biggest energy savings potentialhave been calculated and what the cost will be to perform each action. The energyaudit have been completed and stand as the decision basis for Västfastigheter?s choiceon which action packages that should be implemented.
Föroreningskällor till sjön Anten. En kartläggning och kvantifiering av kväve- och fosfortillförsel
The climate changes that are occuring in the world have resulted in that the EU callingfor a 20 % reduction in energy consumption to the year 2020, to reach that goal theEU want the public sector to go forth as a good example. Västfastigheter owns andmanage the hospital buildings in the Västra Götaland region. To be able to reducetheir energy usage Västfastigheter has hired several consulting firms to chart out theenergy consumption on each hospital building. The biggest energy savings potentialhave been calculated and what the cost will be to perform each action. The energyaudit have been completed and stand as the decision basis for Västfastigheter?s choiceon which action packages that should be implemented.
Tilläggsisolering - lönsamt enligt en livscykelkostnadsmodell?
It is found that the properties of the record years of 1965-1975 is leaking a lot of energy andthese properties are facing a major energy efficiency. From the energy aspect, the facade isafflicted with poor thermal insulation which is a big problem. To address this problem addinginsulation is a good alternative to reduce overall energy consumption of a building. Thewindows on these buildings are also a problem from the energy point of view. Therefore,there are many reasons considered for energy upgrading.
OTEC för Tarawa
Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.
Drainfill
Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.
Nyckeltal för ekologiska fotavtryck för stommar i flerbostadshus
The climate changes that are occuring in the world have resulted in that the EU callingfor a 20 % reduction in energy consumption to the year 2020, to reach that goal theEU want the public sector to go forth as a good example. Västfastigheter owns andmanage the hospital buildings in the Västra Götaland region. To be able to reducetheir energy usage Västfastigheter has hired several consulting firms to chart out theenergy consumption on each hospital building. The biggest energy savings potentialhave been calculated and what the cost will be to perform each action. The energyaudit have been completed and stand as the decision basis for Västfastigheter?s choiceon which action packages that should be implemented.
The effect of new raw materials on pellet prices
As demand for renewable energy is increasing rapidly, the market for biomass pellets
is expected to continue to grow in the near future. Most of the new raw materials that
are discussed for pellet production have one thing in common; the production costs
will increase compared to using traditional raw materials such as sawdust and planer
shavings. The aim of this thesis is to investigate to what degree increased use of new
raw materials for pellet production will affect the general pellet prices in Sweden and
to survey what plans Swedish pellet producers have concerning new raw materials.
To investigate the raw material situation of the Swedish pellet producers an industry
survey was performed. Literature studies were also made on previous research in the
subject field. Calculations of the production costs for pellets were done for the raw
materials sawdust, wet sawmill chips and energy wood respectively.
New raw materials are already used by the large-scale pellet producers in Sweden.