Gliding and sealing functions in Öhlins shock absorbing systems sets great demands onthe contacting surfaces. In this particular case, the bushings and the sealings on acylinder piston. The surface wanted is a surface with both low frictional forces and smallleakage. This study was done with the goals of investigating and determining existingsurfaces due to the frictional force and leakage. How can we in an easy mannerdescribe these?A number of ten front forks were part of a main study.

The main aim of this master thesis was to see the process of an interactive online reference service from idea to final product. The reference service we have studied is developed and used by the Library of the National Institute for Working Life in Stockholm, Sweden and goes by the name phibi. Our goal was to review the whole realization process from the reasons why a service like this was created, how the service was introduced and implemented inside the organisation and finally what the result and consequences were for both the library staff and for the users of the service. Phibi is designed to be a tool that fosters communication between the library staff and the remote users where the users get the opportunity to be helped with their questions by the library staff although they are not physically present in the library. To understand the process we conducted a case study with 11 interviews of the library staff, the superior and the initiator to phibi.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

A new FPGA suitable for space applications has just reached the market. To investigate whether there are any possible flaws or limitations similar to those previously seen on FPGAs, an evaluation has to be done. This master thesis contains the evaluation of this new radhard FPGA with focus on possible design limitations and package related electrical phenomena.Areas evaluated: Ground-/VDD bounce, Cross talk, Rise time sensitivit, Power cycling, Power consumption, Place and route tool, Radiation hardnessThis report contains all steps in the evaluation. From method to measurements, comparisons, theory, results and conclusions. In the evaluation work, special effort has been made to develop designs that really stress the FPGA to find potential problems.

Litorapid Media AB is a printer and prepresscompany, located on Hisingen, Gothenburg. Litorapid is a relatively large company, and is therefore in great need of convenient contacts with becoming and present customers. Seeing that they work with the most rescent technique in the branch of printing, it is important that they market themselves in a modern way. The purpose with this project became, for that reason, to create a more contemporary home page for the company to catch new customers, as well as aninteractive presentation of the company to create a more personal contact with customers they alreay have. The home page was created in the programme Macromedia Dreamweaver 4, and its design is based on previouly distributed brochures.

It is a human right to be treated equally and fairly no matter whom you are, what you like or where you are from. The United Nations addressed the important aspects of equally treatment in their declaration of the human rights. It is each conventions state?s responsibility to fulfil all the rights in the declaration. This study focuses on three Swedish county administrative organizational works with the human rights from their annual reports from 2014.

In a society where children are getting a bigger influence over the family?s consumption and where more products for children are purchased, the market for children products has expanded. This growth is due to a higher amount of older parents which have a god economy and are choosing to spend more money on products for their children. Also the fact that parents use fashion products for children as a way to reflect their own status and that children are becoming more fashionable and aware of trends have contributed to the markets expansion. All together this leads to a grown importance of knowledge for marketers concerning the market.

Lantmäteriet (the Swedish mapping, cadastral and land registration authority) has been laser scanning Sweden since 2009. From the laser scanned data a digital elevation model (DEM) in grid format, with a resolution of 2 m, is produced. This DEM is called GSD-Höjddata, grid 2+ and from its data and the laser point cloud itself (in the form of a las-file) contour lines can be extracted. Lantmäteriet has not yet done this, but plans to update the contour lines in their cartographic products exist. If this is to be done in a satisfactory way an evaluation of different methods for it is needed.

Endocrine disruptive chemicals (EDCs) are found in many everyday products and can cause adverse effects on human health. Small children are particularly sensitive to EDCs and they are also exposed to them in a greater extent than adults. Despite this, EDCs are only banned in a few toys and childcare products. There are many sources of exposure and if no steps are taken to reduce the incidence of EDCs we may face an increasing number of people diagnosed with obesity, diabetes type 2 or various types of cancer.The Swedish Government has set a number of environmental objectives, one of which is calleda non-toxic environment. The Swedish Chemicals Agency was instructed to produce and conduct a national action plan to achieve this goal.

The main aim of this master thesis was to see the process of an interactive online reference service from idea to final product. The reference service we have studied is developed and used by the Library of the National Institute for Working Life in Stockholm, Sweden and goes by the name phibi. Our goal was to review the whole realization process from the reasons why a service like this was created, how the service was introduced and implemented inside the organisation and finally what the result and consequences were for both the library staff and for the users of the service. Phibi is designed to be a tool that fosters communication between the library staff and the remote users where the users get the opportunity to be helped with their questions by the library staff although they are not physically present in the library. To understand the process we conducted a case study with 11 interviews of the library staff, the superior and the initiator to phibi.

There is currently no activity or behavior meters validated for sows under Swedish conditions where the sows are loose-housed during farrowing and nursing. An activity meter could in particular be used to detect sows that are getting ready for farrowing. Assistive technology in order to register different behaviors would be extremely useful in research and breeding. In this study, a HOBO Pendant G data logger was validated for two different functions. First, the function as a pure activity meter in which the accelerometer's ability to detect an upcoming farrowing was evaluated, and second, the accelerometer's ability to distinguish between the behaviors standing up, sitting down, lying ventrally and lying laterally on the right and left sides was evaluated. The accelerometer was attached to a collar around the sow's neck, and was recording its location every two seconds for six hours a day for ten days on a total of twelve sows.

The study intends to find easily recognizable indicator species for water quality in the constructed wetland of Flemingsbergsviken. The study is relevant since indicator species can be difficult to determine for common people. Easily recognizable indicator species could improve dialogue between the scientific community, administrative authorities and the general public. Such species could be used in education systems, associations or in information campaigns. Therefore, I have chosen to refer to these species as didactical species.

Information overload occurs when the amount of information exceeds the individual s capacity to efficiently process and use the information available. In this situation information instead of being an asset becomes a load. This interview study deals with college students experiences of information overload when working on their thesis. Focus lies on use of Internet based information resources. The main result was that the students experienced information overload in specific situations and steps of the process.

Today every organization is committed to some kind of environmental scanning in order to get necessary knowledge of the world around them. The acquisition, organization and storage of information in combination with a strategic use, is today an important factor for a successful organisation in any sector of our society.In this Master thesis I have studied how an organisation such as The Confederation of Swedish Enterprise (Svenskt Näringsliv) handles its information resources. I have also looked at the flow of information within the organization. The Confederation of Swedish Enterprise is Sweden?s largest business federation representing 50 member organizations and 55 000 member companies.

This study is about how to develop younger teens problem solving ability and their social competence. The study carried through by using a qualitative method, two observations and ten interviews. The observations where preparatory for the structured interviews. The respondents where pupils in a class were it is an ongoing project which purpose is to develop childrens problem solving ability and social skills with cognitive training and an empowerment based reasoning model that is called rahyab. Rahyab is a Persian word and it means path- finding.