This report treats a Master Thesis performed at Scania CV AB. The task was to create a computer model of a hydraulic actuator system in the software AVL Hydsim. The system consists of two spring-loaded masses with surrounding hydraulic components. The purpose of the model is to study phenomenon and problems in the system, as well as to be a support in the development of the system. It is not supposed to be used to study absolute values in its current form.

De flesta politiska riktlinjer har idag en hållbar samhällsutveckling som övergripande och gemensam nationell ambition. Det innebär att uppsatta mål för ekologisk, ekonomisk och social hållbarhet ska nås i samverkan mellan aktörer från olika sektorer och på olika beslutsnivåer. Att förstå vad det innebär på lokal och regional nivå, och hur man kan nå de målen, är inte så enkelt. Syftet med denna studie är att skapa ett underlag som kan användas i arbetet med hållbar landsbygdsutveckling, inom den informella regionen Bergslagen i Sverige. Hinder och möjligheter för hållbar landsbygdsutveckling har analyserats genom att arrangera fokusgruppdiskussioner med olika intressegrupper i samhället.

In this essay we strive to examine how the social work in Sweden will be affected if the Swedish welfare model goes through fundamental changes. The study illuminates the close connection between the Swedish collective bargaining model and the Swedish welfare system. The questions we present in this essay, and hopefully answer satisfactory, are: is the Swedish welfare model subject to thorough changes? How will such a change alter the social work in Sweden?, is the Swedish collective bargaining model in a state of modification? Would a modification in the collective bargaining model have effects on the Swedish welfare model?We have used a qualitative method in collecting empirical material. We interviewed three representatives, who worked for Confederation of Swedish Enterprise, IF Metall and The Swedish Municipal Workers respectively.

This study is about organizing major sporting events. Sporting events? numerous positive outcomes for the hosting region has resulted in a growing number and size of sporting events globally. The aim of this study was therefore to provide further knowledge about how organizations in major sport events practically and strategically operate and how processes related to organization and leadership can contribute to the success of the event. The study focuses the context of a Swedish national multi-sport event hosted and held by three different cities, three different years.

In this master thesis work, a new method called MultiScat, is compared with the conventional method with alfa-correction, for computing concentrations from intensities in X-ray spectrometric analysis. The conventional model is a linear model, which only takes the photoelectric effect into consideration. It doesn't consider Rayleigh and Compton scattering even though it has a great impact on the measured intensities. Here MultiScat differs a lot. MultiScat is based on a solution of the Boltzmann transport equation.

AbstractThe purpose of this study is to find out how pupils give expression of a water cycle model and if the model causes any misunderstanding. Two problems constitute the starting point for this investigation. The first question is: how do the pupils explain the water cycle with the help of the jar model (can of glass). The other question is: can the children see any similarities between the can of glass and our earth. Qualitative semi structured interviews with seven pupils in the ages of 8-9 have been used to show the pupils? own thoughts and how they express them.

We have by Statistics Sweden (SCB) been given the task of using different dynamic regression models in order to forecast service price index for sea transport. The aim is to see whether these models provide better forecasts than those previously used. This essay aim to identify, estimate and evaluate the selected prediction models. Through our data material we were given access to 28 sightings of sea transport index during the period of 2004 q1 to 2010 q4. We have chosen to evaluate three different transfer function models, one ARIMA model and one naive forecasting model. The input variables we decided to test in our transfer function models were the price of petroleum products, the port activity in Swedish ports and the lending rate of Swedish Central bank. The results of our study suggest that transfer function models generally provide better models than the ARIMA model and the naive forecast model.

The purpose of this thesis has been to build a parameterized model of a prototype motor in the program Solidworks, to use in future optimization of aspects of effectiveness and weight. The result were two models. The first model were one minor part of the whole design in 2D, to be able to optimize and study the minor part with a faster loss simulation. The second model was the whole design in 3D. The whole model were done with the three programs Solidworks, Comsol and Matlab.

Background: In 1998 it was stated that Swedish municipalities would report the pension liabilities according to the mixed model where the pension liabilities before 1998 was moved from the balance sheet. The mixed model has been criticized by economists for not showing the total pension liabilities. To remove some of the liabilities in the municipalities balance sheets means that the solvency improves. Some municipalities have decided to go against the municipal accounting law and recognize all of the pension liability as a liability according to the full funding model. When two accounting models are being used the comparison of the municipalities' financial statements is much harder.Purpose: The main purpose of this study was to study the reason why some municipalities apply full funding model rather than the mixed model.

The purpose of our essay is to examine if variation exists in the way that auditors try their independence, this so called analysis-model. We will suggest some factors that influence the way auditors practise the analysis-model. The institutional theory predicts no differencies since the normative pressure could be expected to be severe. But we found that among other things people?s qualifications, personalities and audit firm?s size and age influence the way auditors try their independence.

A new material model, for the FE-program ADINA, has been verified against twoexperiments. One unreinforced concrete beam and one reinforced concrete beam.The model, DF-concrete, has the possibility to estimate true concrete. However theresults indicate that in order to be sure that the estimations are true, there ought tobe data from the true concrete to verify against.Two FE-models have simulated the behavior of a ring-shaped part of the nuclearcontainment vessel. The results from the first, frictionless, model agree with similarsimulations and hand calculations for high pressures in the containment vessel. Thesimulations of the nuclear containment vessel show cracking in the concrete after10-11 bars of over pressurization.

Problems:How would a decision model that takes into account more aspects and dimensions than just the financial aspect look for smaller service compa-nies? What aspects are important to consider in such a decision model?Purpose:The purpose of this master thesis is to develop a decision model based on previous research, to improve decision making in smaller service com-panies ? by considering perspectives that traditional investment calcula-tions ignore.Method:The study was qualitative and was based on both primary and secondary data. As data collection method for the development of the model we used literature search on previous research. The study?s primary data consisted of responses from five smaller service companies.

Through geopolitical theory this thesis explores how conflicts within states can be read and understood according to an analytical model determining one or several possible causes for the conflict.  The model is created by the author and reflects geopolitical theory by giving three possible explanations to an intrastate conflict: culture, economy or territorial construction. The aim of the thesis is testing this model on two selectively chosen case studies ? i.e. two intrastate conflicts ? namely: the upcoming referendum in Scotland and the terror attack at Tiananmen Square in China.

The work with this report has been focused on developing a methodology model for control at purchase. The methodology model covers parts classification, dispatching systems, batch shaping and more. The aim with the methodology model is that it will be used as an aid for a cost effective material planning to increase the value for customer.The work covers also a description of the present situation and the purchase process at Company X. Six parts have been applied, two from each class (A, B and C), in the methodology/model. The parts that have been applied are included in the flow between Company X and their supplier Company Y.Data have been collected trough literature studies, interviews and the company?s business system.

This essay answers the question: How can a manufacturing business fulfill the information demand in the processes; purchasing, production, warehousing, order and delivery?The question has been answered through different kind of studies, such as literature, documents, Internet search, interviews and observations. The essay is written from a hermeneutic point of view and by using qualitative research. The result has been validated by two different manufacturing businesses.A simple information logistic model is the result of a comparison made between theory and empery. The aim of the model is to describe how a manufacturing business can fulfill the information demand by using different methods.