A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

Image editing software offers unlimited possibilities to alter an image. Provided that digitalinnovation is not altogether positive, it is important to develop knowledge of its negative sides. Thispaper examines the use of digital image processing from a critical IS perspective. Throughqualitative interviews with professional retouchers, the study provides a picture of their ethicalrelation to the software they use for retouching images in advertising. Though, it turns out that thecustomers who order the retouching holds responsibility for what is altered.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

This study aims to investigate development and reasons behind sustainability reporting in large Swedish companies. By examining 15 companies? environmental and sustainability reports between the years 2000 and 2008, data was collected on matters such as frequency, scope and design. Identified trends were to a large extent in line with previous studies on international development; sustainability reporting is growing in several aspects. The authors have found one major reason for this development to be increasing requirements and expectations from stakeholders and a need for companies to legitimize their actions.

In April 2010 Vägverket (the Swedish National Road Agency) andBanverket (the Swedish National Railway Agency) will merge intoTrafikverket (the Swedish National Traffic Agency). Trafikverket willassume unified responsibility for the risk management that atpresent is responsibility of Vägverket and Banverket separately. Atpresent, as it will be shown in this thesis, Vägverket and Banverketshare the same theoretical background for risk management but usedifferent implementations often within the same agency. The use ofdifferent implementations results in a reduced transparency of therisk management both within and outside the agencies: this willbecome even more problematic when they will be fused intoTrafikverket.The aim of this thesis is to review the current risk managementmethodologies used at Vägverket and Banverket and to suggest aunified tool for the risk management at Trafikverket. This will bedone by focusing in particular on construction projects, one fromVägverket (Partihallsförbindelsen) and one from Banverket(Nynäsbanan).

Background: The Swedish life-insurance business has been extensively criticised lately due to broken promises to customers as well as due to scandals that some companies within the business have been involved in. The companies within the Swedish life-insurance business find themselves in a so- called crisis of confidence, something that is created in and by media. A company that finds itself in a crisis of confidence somehow have to manage the situation and crises of confidence can also result in different kinds of changes. Purpose: The aim of this thesis is to explore and analyse how individual life- insurance companies manage crises of confidence. As a consequence, the aim is also to investigate in what way crises of confidence are initiators to change.

Background: The Swedish life-insurance business has been extensively criticised lately due to broken promises to customers as well as due to scandals that some companies within the business have been involved in. The companies within the Swedish life-insurance business find themselves in a so- called crisis of confidence, something that is created in and by media. A company that finds itself in a crisis of confidence somehow have to manage the situation and crises of confidence can also result in different kinds of changes. Purpose: The aim of this thesis is to explore and analyse how individual life- insurance companies manage crises of confidence. As a consequence, the aim is also to investigate in what way crises of confidence are initiators to change.

This essay deals with the principle of surprise warfare and its development as well as the adaptation of military action that had to be made to surprise the opponent in the modern era.The concept of surprise is divided into its components in order to clarify what is required to implement a surprising maneuver, to understand the complex concept and form a theoretical framework for gathering facts in the case study.Development and adaption are demonstrated by a comparative case study where Pearl Harbor illustrates an example of historical surprise and Operation Desert Storm illustrates a modern surprise. The product will then be analyzed in order to detect the development and how military conduct is forced to adapt in order to carry out a surprising maneuver. The results shows that the military action of performing a surprise attack has had a major development and is now carried out in a different stage of the attack..

In this essay a model of a potential illegal hunter?s decision-making is created and presented in order to provide an overview of important parts of the complexities associated with the current Swedish predator policy. A comparison is made between a livestock owner?s economic incentives, and the expected costs faced by the potentially caught lawbreaker. In accordance with economic theory the benefits and costs of illegal hunting are compared and thus the optimal choice is determined where marginal costs and benefits are equal.

In the field of maintenance management there are but a few models an organization can use. The one model that has risen to the status of being the de facto standard in Sweden is pm3(på maintenance management model). The aim of this study is to lay the groundwork for a new method of evaluate the use of pm3within organizations. Today there is no uniform way of performing such an evaluation, which is necessary in order to diagnose the performance of the systems maintenance organizations.In the process of creating our own method for performing this kind of pm3audit, we further developed the ideas from a study by Lagsten & Nordström (2013) that was performed at the county Region Skåne. The authors of that study had developed ideas about using method rationale as a basis of creating a method for pm3auditing.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

The electronic music studio ?Elektronmusikstudion? (EMS) inStockholm was initiated in 1963. It has had several different managers throughout the years. EMS soon became a rather costly project. Furthermore there have been several conflicts among staff and users wich has contributed to EMS fairly turbulent history.

Choosing a new plastic material for a container includes several different steps. In this case,the Finnish company Hackman needed a new type of packaging material for theircutlery- and kitchentool series »Hackman tools«. The project was carried out in cooperationwith the design agency Ytterborn & Fuentes, which has Hackman as a client.Several different demands were put on the material in order to fulfill as many of the clientswishes as possible. The most urgent problem with the existing container was the difficultysfor the customer to clearly see the contents in the container. Because of this problemthe customer tried to open the container in the shop.

This essay deals with the principle of surprise warfare and its development as well as the adaptation of military action that had to be made to surprise the opponent in the modern era.The concept of surprise is divided into its components in order to clarify what is required to implement a surprising maneuver, to understand the complex concept and form a theoretical framework for gathering facts in the case study.Development and adaption are demonstrated by a comparative case study where Pearl Harbor illustrates an example of historical surprise and Operation Desert Storm illustrates a modern surprise. The product will then be analyzed in order to detect the development and how military conduct is forced to adapt in order to carry out a surprising maneuver. The results shows that the military action of performing a surprise attack has had a major development and is now carried out in a different stage of the attack..

To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..