A carnival can not be stopped! A design pedagogical study of children and norms In Basel, the only Protestant carnival in Europe takes place. The carnival is called Fasnacht. For three days, there is a wild and uninhibited play with tradition, crossing borders and social criticism.The aim of this thesis is to expand the understanding of the concept of the carnival, and how to use it for an educational purpose. Three children from Basel have been involved in an workshop where they designed and talked about norms and power structures through the carnivalesque principle. The study is based on the questions: How can you use the carnival as a starting point for designing and talking about norms and power structures together with children? And; How can the design process support such a project? To spot this, I made arrangements for a design educational project.

This work has been made in cooperation with the municipality of Eslöv and the inventory area is a part of the deepening of the municipality plan of east Eslöv. The aim of the work is to test the principle of balance in the overall planning. Later in the detailed planning process a more detailed calculation is made and a suggestion of suitable measures for compensation is made. Then the method with green area factors can be used. The goal is to balance the negative influence on the environment from the planned impacts to gain a sustainable development of the city. The principle of balance means that the one responsible for the development also has to compensate for the negative impacts on nature and landscape that comes with the development.

The aim of this thesis is to investigate how municipalities handle planning of megaprojects. The term megaproject here refers to a large project in terms of time, space, investments, numbers of agents etc. With an increasing importance of the phenomena the need of discussing the role local politics could take in this process is important.How do municipalities handle the difficulties that come with megaprojects and what roles do they take in their work with megaprojects? These empirical questions are tested on a case where the municipality of Lund works with the megaproject European Spallation Source (ESS). A theoretical question discusses the megaproject in the light of governance and government, and structures the analysis around these two important terms.Different parts of the municipality handle there part of the planning from there own logic.

The liberal state, it has been argued, must be neutral between different conceptions of the good. Embodying ideals such as fairness and impartiality, state neutrality is intuitively appealing, but working as a restraint for state actions it is somewhat unsatisfactory. People make mistakes about their lives and people live less valuable lives than they could do. To then restrain the state from doing as much good as it can seems just as unappealing as neutrality at first seemed appealing. In this paper, a possible solution to this dilemma is presented.

The Human Rights claim that all humans have special rights that are not allowed to be broken or violated. Although these rights are broken and violated by states every day. One major fact that makes this possible is the principle of sovereignty that includes all states, and which says that every state has the power and right to make decisions and create laws within the own country without the interference of other actors. In other words, the problem is that the states have to much power in relation to actors usch as the United Nations and to the rules of the Human Rights. This essay describe a possible way to strengthen the power of the Human Rights so that all humans can be guaranteed the fulfillment of the rights..

Bakgrund och problem: Ett tolkningsutrymme har identifierats i IAS 38 gällande kriterierna som behandlar aktivering av FoU. Detta kan innebära ett problem då det finns risk för variation mellan företag i tolkning och tillämpning av kriterierna. Det kan i sin tur påverka jämförbarheten mellan företagen i redovisningen av FoU.Syfte: Syftet med denna studie är att utifrån ett informationsasymmetriproblem studera jämförbarheten mellan företag i redovisning av FoU. Vi ämnar kartlägga tillämpningen av kriterierna i IAS 38 med avseende på variation mellan företag. En eventuell variation ämnar vi förklara utifrån hur företag förhåller sig till försiktighets- och matchningsprincipen.Metod: Metodvalet är en kvalitativ undersökning med djupgående intervjuer med fem företag i IT-branschen.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

The housing sector uses 40 % of the energy in Sweden and half of the electricity usage. Theuse of energy is the main reason to the increasing rate of carbon dioxide in the atmosphere.This is the main motive but also a wish of higher safety, that is a higher rate of selfsufficientenergy production in Sweden, we want to decrease the need of using fossil fuel. Now whenthe energy price rise, the interest in energy issues increase and more people discuss thepossibility of reducing the usage of fossil fuel. A change to renewable energy such as sun,wind and water is the only solution where we can get a sustainable development.One way to contribute to a better use of energy is to build in the principle of passive house.The house is being built with a thick and tight insulation. If you use a heat-exchanger withhigh degree of efficiency and a final heating battery on the ventilation system, the heat fromlamps, devices and the ones living in the house should be enough to fulfil the criteria ofliving.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

In Sweden the main principle is that interest expenses are deductable. The rules of limitations on interest deduction are exemptions to this main principle. The provisions, which came into force on the first of January 2009, have been inserted into Chapter 24 secs. 10 a ? e Swedish Income Tax Act (ITA).

The purpous of this master?s thesis is to explore how the swedish public library evolved between 1890-1911, before the state implemented the library reform in 1912. The material used to cunduct the study concists mainly of texts published during the time frame of the thesis in the form of books, booklets and articles from Folkbiblioteksbladet, a journal dedicated to the subject of the swedish public library.Drawing upon Habermas theory of the structural transformation of the public sphere and Bourdieus theories about taste as social distinction and symbolic capital, the thesis seeks to show how the public participated in the evolvement of the public library and which aspects of society that contributed to the public library?s establishment as an institution. The findings are also discussed in relation to previous research of the history of the Swedish public library.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.