This report describes a thesis project on 15hp. The purpose of the thesis project is to build a laser projector that reacts on sound waves and thus get a laser beam to draw visualizations of sound waves on a wall. The idea was that the design would be independent and not have to be plugged into any audio equipment. This was achieved by absorbing sound waves into a microphone. Another factor was to get a ?do it yourself? -feeling of the design and therefore it was chosen to be constructed using for example, old hard-drives.The result was a relatively large and bulky designed laser projector that can draw sound waves on a wall..

The aim of this master thesis is to investigate the ideas about functions that public libraries have in the local society. We have used the method idea analysis on four municipal library plans, to find out which ideas about library functions that frequented each plan, and what similarities and differences there were between the ideas about functions in each plan. As a theoretic base, we have used a theory about three dynamic spheres in modern society: the state market and civil society, and examined how these three spheres influence and control the library functions. We have extracted six different ideas about library functions: educational, social, economical, entertaining, serving and democratic functions. The most dominating ideas in this study are ideas that the public library should be an educating and formative institution.

This report examines some common or otherwise interestingnon-cryptographic hash functions with respect to the number of collisions when used in hash tables for different types of hashkeys. The report answers which of the examined hash functions can be seen as the best performing for the chosen hashkeys. To compare the different hash functions, an experiment which studies avalanche effect behaviour is carried out. The experiments also calculate the fraction of colliding hashkeys, and the distribution of hashkeys in hash tables is studied using Karl Pearson?schi-squared test.

The regulatory framework for constructional calculations in Sweden did expire In January the 1.st, 2011.Since then the constructional regulatory that originally were composed by Boverket (BKR) has been replaced by new common range (Eurocodes) for the entire European Union. This transition has led to changes in existing rules and standards regarding dimensioning area in Grids and has forced a need for updating to structural Engineers.The new calculation system has caused time-consuming studies of the new rules and a proper understanding of all the advice and regulations for the entire profession.This study has been carried out in cooperation with the firm "Knut Jönson Ingenjörs AB i Stockholm?, that has been affected by this transition as all other consulting firms. The firm has requested for a calculation method of wall beams according to Eurocodes. The study's focus is therefore to clarify the rules and guidelines regarding the design of wall beams according to the new regulation.

AimThe aim of this essay is to investigate the possibility to exercise climbing within the framework of the physical education in the obligatory school. We investigated how physical education teachers think about exercising climbing in school and how the Swedish Climbing Association is working to reach out to schools.MethodA questionnaire was sent out to 81 schools (Idrottshögskolans partner schools) in suburban Stockholm, which corresponds to 10% of the total amount of schools in that area. A mail interview was also made with a representative for the Swedish Climbing Association who also represented a local climbing association, to collect information about how they worked with schools and youth.ResultsWe have not found anything in the steering documents against exercising climbing during physical education. There are obstacles for exercising climbing during physical education, a wall for climbing is very expensive and the schools have a lack of space for this wall. The results from the questionnaire showed that 76% of all the schools that did not have a wall for climbing wanted to have one.

För vissa är graffiti konst, för andra är det ett tecken på förlorad kontroll. För mig är det ett redskap för att mötas. Jag har delat in mitt examensarbete i två delar. Den första behandlar visionen jag baserat mitt arbete på. Den andra handlar om design och placering av de fysiska paviljongerna. I den första delen har jag utgått ifrån ett scenario där den fysiska arkitekturen återspeglas i ett virtuellt gallerisystem jag get namnet Gallery Wall. Denna del finns bara på idébasis men har varit utgångspunkt då jag formgivit mina paviljonger. Jag har skapat fem olika paviljongstyper som tillsammans på ett teoretiskt plan utgör en och samma virtuella huvudform.I, eller rättare sagt på, paviljongerna ges tillfälle för vem som helst att måla och presenteras sin gatukonst. Min förhoppning är att mina paviljongtyper skall inspirera andra att bygga egna varianter som alla är del av Gallery Wall.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

The crisis on Wall Street. This essay is a comparative study of how two business newspapers report on the bankruptcy of Lehman Brothers Holdings in September 2008. Seven articles from the Swedish European financial newspaper Affärsvärlden (Business World) and five articles from the Chinese-Asian news agency XINHUA FINANCE are examined. The aim is to analyze, understand and evaluate from a rhetorical perspective. My thesis is that rhetors storytelling can tell us more about how we cope with crisis in the global economic discourse. The texts can portray man as a narrative creature when identification as a rational actor is not enough. The analytical methods used are linguistic analysis with an emphasis on metaphor analysis, narrative analysis based on pentad - Critical dramatism, and discourse analysis with doxological outlook. The results show that both newspapers seek to defend the global economic discourse, but they do so in different ways. Affärsvärlden advocates calmness and conveys a cautious attitude. The heart of the crisis, as well as its solution, is on Wall Street. XINHUA advocates control and expresses confidence in authorities and the system. Asia is presented as Wall Street's savior..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

Along with rising energy prices and increasing awareness of environmental issues, the criteria for buildings energy performance have been sharpened through the years. Today, ?passive house? and ?low energy house? are commonly used phrases in the construction industry and is expected to become increasingly common in the future.For houses with well-insulated building envelope the importance of well constructed details increases when minimizing the heat losses. Examples of these details are floor-wall junction and window openings in the wall. In such connections thermal bridges occur, which means that heat more easily is transported out of the building, compared to the rest of the building envelope.This report deals with detail solutions around windows and a comparison between a traditional slab and a foundation from Koljern consisting of foam glass.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

A brush of paint on a grey compound wall can mean so much more than simply an addition of colour. It can meanan appropriation of public space, a shared public space enclosed by a wall now ?owned? by someone. It can meanan arisen conflict leading to debate about the right to use public space.The Wall Project is a Mumbai based beautification project that uses paint and outdoor walls to brighten uptheir city. The Urban Typhoon workshop is an activity set up in self-evolving neighbourhoods where municipalinterference is scarce.

The purpose of this study was to investigate whether cannabis use can affect cognitive functions. The method that was chosen to answer the purpose of the study was a general literature review. Article search occurred in the databases PsycINFO and PubMed. Nine articles were selected based on the study?s inclusion criteria.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..