In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

The purpose was to examine how the pre-schools used the public libraries in two Swedishtowns. We also examined if and how the pre-schools and the public libraries were coopera­ting.Literature showed that it is possible to stimulate children's language development and this is a duty for pre-schools and public libraries. We sent an inquiry to all pre-schools divisions in both towns. We interviewed two librarians. Our results showed that the pre-schools did use the libraries to a great extent but they didn't cooperate with the libraries in the sense that they had elaborated agreements.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

Together with NCC and Sweco we measured the air-flow on a semi-detached house in Jönköping. When a pressure measurement is made, the house gets exposed to over- and under pressure. This is done in order to examine the houses climate shell. The climate shell of the semi-detached house we tested exceeded the required air thickness in BBR-2002, hence, measures have to be taken.This report also displays the importance of building air thick houses and what consequences a non air-thick house can have for the ones residing the house. A discussion of different measures is on for the addressed problems with the flow-measurement and the alternative construction-solutions.Furthermore we have described in this report of how to account for the performance of the air pressure, what kind of equipment we used and how we came up with the results.

This report was an outcome of a cooperation between ?The Visitor and Knowledge Project Carl von Linné? and SLU, the Swedish University of Agricultural Science. The aim with the cooperation was to create a garden and to suggest suitable plants for an orangery already built. All species suggested should have a documented relationship with Carl von Linné. The project is located in the southern part of Sweden at an estate named Möckelsnäs not far away from Linné?s birthplace.

The purpose of this study was to investigate different relations between the damages of falls and background variables as well as the relation between the falls and the weather condition to later be able to use this report to expand the knowledge among workers at VTI about the pedestrian fall injuries. All of the fall injuries in the data that this study is based on have occurred in Sweden during the time period between January 2003 and December 2011.To be able to answer the questions that this report is based on several statistical methods are used. The statistical methods that have been used during the making of this report are multiple linear regression, binary logistic regression, correlation analysis, association analysis and descriptive statistics as well as visual analysis.The results of the study show that women around menopause age have a tendency to get a big increase in the amount of injuries compared to men of the same age. The study also suggests that men on average tend to have a lower level of injury compared to women.Age also seems to affect both the amount of injuries and the level of injury negatively. The study suggests that the most likely reason for this is both that the intake of ?Fall Risk Increasing Medicine?, which is medicine that increases the drowsiness, is higher among older individuals as well as lower estrogen levels among older women and lower amount of testosterone among older men, which causes a loss of bone density in both sexes.The weather seems to have a strong effect on how many injuries occur but also a noticeable effect on the scale of the injury.

Performance measurements have become very important tools for companies because of ever increasing global competition in today?s market. Delivery dependability is one of the three most important performance measurements for companies to focus on and that makes this analysis, of the dependability, both very interesting and up to contemporary. In this rapport different aspects of delivery dependability will be dealt with, and a weight will be on what to measure and how to measure it together with how to present the outcome of the measurements. A discussion has also been held regarding what goal the company should have on its dependability.

The aim of this report is to give a description of a diploma work of 20 points that has been performed during the spring 2006 at Ericsson AB in Borås. The report accounts for the problem and procedure during the diploma work. The software used for this project was embedded in a radio link. The RAM in this radio link was divided into several regions where two were used for memory allocation. The current allocation of memory in the radio link was not optimized with regards to performance, security and memory use and the configuration used made it difficult to determine the memory use of the system and the actual memory need.

This report was written in an attempt to summarize old and new theories and scientific results regarding FORL (Feline Odontoclastic Resorptive Lesions). Several different kinds of treatment are presented in this study. Among them teeth extraction and crown amputation seems to give the best long-term results. It seems clear that the domestic cat of today have no trouble digesting dry foods without their teeth. The most accurate way to diagnose FORL is by using intraoral dental radiology technique.

Tile covered bathrooms require a wellexecuted waterproofing in order toprotect the underlying construction frommoisture. Länsforsakringar Uppsala paysannually out millions in insurance fordamages related to poor waterproofedbathrooms. In recent years, SP (SwedishNational Testing and Research Institute)investigated and researchedwaterproofing products, resulting ingreater shortcomings of product defectsthan expected.This report raises the problemsconcerning waterproofing and discusseswhy they occur. By studying productinstructions and insurance cases anddamage reports provided byLänsforsakringar, the most commonproblems concerning bathroomwaterproofing where concluded. Animportant part of the report was tofind out the actual cause to whywaterproofing damages occur.The results of the survey indicate thata common cause of water damage usuallyis related to poor productinstallations.

Background: The latest development within the business world has been characterized by deregulation and globalization which has made the company bigger and even more influential. The increased power has resulted in a shift of responsibility for the community from the public to the private sector. (Steinholtz och Löhman, 2003) There have been many trends regarding what accountability includes and how financial accounting can be complimented in a useful and reliable way. Some trends have come to stay whilst others have shown to be less successful or the world has not been ready for them. (Larsson, a, 2002) Purpose: The purpose with this paper is to look at the historical development towards accounting for sustainability and to investigate what factors that might have hade an impact on this development.

When a helicopter is flying, the dynamics vary depending on, for example, speed and position. Hence, a time-invariant linear model cannot describe its properties under all flight conditions. It is therefore desirable to update the linear helicopter model continuously during the flight. In this thesis, two different recursive estimation methods are presented, LMS (Least Mean Square) and adaptation with a Kalman filter. The main purpose of the system estimation is to get a model which can be used for feedback control.

This report tries to discuss the concept of social sustainability; what it means and how residential development can be made more socially sustainable. This is done by interviewing several and various representatives in JM AB, the municipality of Uppsala and residents of Åriket to explore how JM AB as a housing developer and the municipality are working with issues regarding social sustainability and what the residents in one of the new housing projects themselves think of these issues. The result of these interviews will be compared and analyzed with the prospect of finding common variables and hopefully ways of improvement.This will result in our own recommendations of areas of improvement either by broad initiatives or specific actions to increase the social sustainability. Areas such as meeting places, sustainable functions and joint efforts between different parties. During the work on the report we come in contact with several other areas of interest that we are not able to process ourselves and therefore recommend them for future studies..

This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.