Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

Mergers and Acuisitions are becoming increasingly common. This can be explained with the fact that the competition is increasing. Therefore many companies are forced to join other markets. This thesis inquires into the process of Mergers and Acqusitions when one company buys another company. The main focus is set on how three different banks handle the process of Mergers and Acqusitions and what results this leads to. These are: Kaupthing Bank, Nordea and Citibank.

Many research reports mention the fact that a huge number of all system development projects never reach a successful ending; with other words never fulfil formulated goals. By identifying and forming success factors (and in some aspect risk factors) that the project manager in practice can use, this study may be seen as a step in the direction towards minimising the high number of failed system development projects. The purpose of this research report is to investigate how a system development project, where the development process is based on a specific development or process model (in this case the Waterfall model), can and should be driven. I aim to clarify what is demanded of a project leader for the specific development process and give an account for which eventual leadership qualities that can be well suited for given situation in relation to the need for technical competence. Among other things the project manager should inspire confidence, drive, be a decision maker, engage and own some form of basic knowledge in the field of system development.

In 2010, SAS received the "On time performance service" award by Flightstats. This award was an affirmation of long-term work, both in projects and as an ongoing process, which the company sought to systematically improve punctuality on its flights. The extent to which SAS followed the values and the underlying theories of the cornerstone model for total quality management was the main issue in this essay. Whether there are conditions for the company to get even further by working in other ways was also investigated. In addition, the importance of punctuality in relation to customer satisfaction was discussed.

As a result of increased property prices on apartment buildings in Halmstad many local investors thinks that the market behaves illogical. This because these investors can?t find any profitability in many real estate transactions. The valuation between different investors on the same object therefore goes their separate ways. One example of this is a property in central Halmstad which starting price was about 23 million SEK.

In this report focus is put on the combustion process at a cement plant. Combustion is the heart of the cement making process and absolutely crucial to have under full control and well optimized. The fuel is put into the process through a burner pipe and this burner pipe is modified to reach a more efficient combustion. The primary target is to enable burning of heterogeneous alternative fuels and increase the production level. Other positive effects from this type of optimization is lowered specific fuel consumption and lowered CO2 emissions. A redundant burner is chosen for the project and overall the project steps are the following: 1. Installing a Jet air nozzle ring in a way so it can move both axially and radially due to temperature changes. 2.

Because of among other things the globalization and a focus on core competencies knowledge has become very important for the companies of today, especially for research-intensive companies. The problem is that the companies become more sensitive to how knowledge is created and spread, that is, how organizational knowledge is created. Especially sensitive are companies who are small, young and research-intensive. The purpose with this thesis is to explore how organizational knowledge is created in small, young and research intensive companies.The theory is based on a five-phase model of organizational knowledge creation and four modes of knowledge conversion described by Nonaka and Takeuchi (1995). These concepts constitute the foundation of the analytical model used in the thesis.The study is carried out by qualitative, highly structured interviews with low standardization.

The work with this report has been focused on developing a methodology model for control at purchase. The methodology model covers parts classification, dispatching systems, batch shaping and more. The aim with the methodology model is that it will be used as an aid for a cost effective material planning to increase the value for customer.The work covers also a description of the present situation and the purchase process at Company X. Six parts have been applied, two from each class (A, B and C), in the methodology/model. The parts that have been applied are included in the flow between Company X and their supplier Company Y.Data have been collected trough literature studies, interviews and the company?s business system.

This thesis has enlightened how consumer behavior is when buying clothes via the Internet and the problems and difficulties that could face the companies. This study was conducted through interviews with people that have bought clothes through the Internet, traditional catalogues and real stores. The conclusions showed that the Internet is as suitable as traditional catalogues for buying clothes. Another dimension were put to the aspect of availability to a virtual mall in the design of the catalogues. Finally, it is in the best of the e-business companies interest to study how e-catalogues should be structured and designed for the consumers..

AimThe purpose of this study has been to help Åtvidabergs FF to find development opportunities by reviewing the internal communication and decision making process within the organization. In this study we have used two models, Johari window and Administrative man.Our study has two main questions. The questions at issues are:? Can Åtvidabergs FF with help of the communication model Johari window identify how the internal communication can improve?? Can Åtvidabergs FF use the Administrative man as a decision model?o Will the use of the model Administrative man lead to better decisions will be made?MethodWe have made a qualitative case study in a positivistic spirit. Data has been collected through half structured interviews.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

Three years after the Bosman case, it was decided that a socio-cultural approach on sports be introduced in Europe. EU presented a formulation for the same purpose ? The European Model of Sport. The purpose of this formula was to maintain the socio-culture and traditional ap¬proach to all kinds of amateur and professional sports in Europe. If we were to com¬pare this model with the American model of sport, it shows many different ways of thinking in terms of organised sport.

During the last couple of years the focus for many businesses have moved from just being price oriented to include such factors as quality, flexibility, service, delivery precision and environmentally friendliness. The shift in viewpoint arises from the increasingly competition on the market and the hard economic atmosphere. It has become more important to differentiate the company and its products to be able to increase market share. The purpose with this master?s thesis was to get a better understanding on how companies (customer to DHL) are reasoning and prioritizing when choosing Swedish carriers.

Decision-making and valuation when buying small caps is a poorly explored area. Likewise, since disputes about deficiencies in the company?s financial and legal standing are, almost without exception, resolved in arbitration with confidentiality requirements for both sides, there is very little empirical knowledge about such disputes. This paper hopes to add empiric experience by describing such a take-over ? the purchase of the Jon Blund companies.