Is the new technology always the best? This final project tries to determine if BIM is the melody of today, or if traditional 2D drawing is recommended. Perhaps a compromise is necessary, utilizing both methods.In order to answer this question, different views from the industry have been retrieved through reports, producers of software and users. The approach has consisted in building a 3D model of the school Råslättsskolan, house 01, along with interviews with people involved in the building process.When working in 2D it is hard to include the third dimension, mistakes are done and collisions happen that must be corrected, in most cases at the construction site. BIM is an incredible help since the model allows you to detect collisions and correct them.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

?A designer rarely works alone?. The first sentence of Jonas Löwgren and Erik Stolterman's chapter on design as a social process made me curious. What if a designer worked alone? What are the actual differences between working on a project alone and as part of a group? How would it influence the creative process? What would be different when coming up with ideas, meeting with clients and setting deadlines? Does the influence of another designer stifle the individual creativity or does it actually nurish it? This paper is written to answer these and other questions as well as take you through the creative process of the production of ?Daddy? - the music video..

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

This is a final thesis done at BT, considering one of their forklift truck models called Reflex. The first part of this report is about a preliminary investigation investigating what kind of diagnostic systems BTwants to use, and also which demands there are to meet all expectations on such system. Secondly a diagnostic system, which will show if the drive wheel is worn out, will be presented. In the preliminary investigation, two kinds of diagnostic systems were mentioned. These were Model based diagnosis and Predictive analysis.

The structure and performance of grocery distribution in Sweden has changed profoundly since the second world war. Increasing access and usage of the private car, in combination with an accommodating town planning has enhanced the exploitation of scale economies within distribution firms. There is, however, some ambiguity concerning the overall efficiency of the distribution system when the costs associated with travelling and purchasing performed by households are treated as an integrated part of the total distribution cost function. The purpose of this master thesis is to develop the foundation of a spatial optimisation model, which defines the most efficient distribution system. The underlying idea is that the optimal localisation and size of grocery stores is a function of economies of scale within the firms weighed against distributions costs within the households, such as transportation costs.

Title: The customer?s contribution to the innovation-process ? a study of using customers to discover latent needs. Level: Final assignment for Bachelor Degree in Business Administration Author: Robert Klein Supervisor: Agneta Sundström Date: 2014-06 Aim: The purpose of this study is to gain enhanced understanding of what knowledge costumers contribute with in an innovation-process lead by a producer of goods, and how that knowledge is used to fulfill latent needs. The area of research has formerly described which results customer-involvement lead to, but have been scarce in describing how results are produced. Method: From a qualitative onset, a case-study collecting data through observations and interviews capturing customer knowledge contributions, and producer use of fetched knowledge has been conducted. Data has been analyzed using a grounded theory approach. Results have been processed in several steps in which material has been categorized and enriched continuously. Result & Conclusions: Customer-knowledge is broken down into market-knowledge, everyday-knowledge, and specialist-knowledge, which all are significant to a producer of goods.

Mobile telecom and the Internet are converging, which opens new possibilities for market actors to create business through the mobile handset. At the same time market experts are predicting that mobile operator?s existing dominance in the telecom market will in the future decline as new technology such as VoIP and services will erode the operator?s traditional revenue model. This implies that mobile operators will need to rethink their dominant business logic to create new value for their customers. Mobile operators are aiming to expand their existing revenue model through advertising in the mobile handset and are searching to create new business models that evolve advertising sales.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

This paper is a degree project on the C-level, 15 points at University West, Department of Business and IT dept. Informatics. This study is about agile methodology and its impact on IT projects. Requirements management is a process within an IT project, where customer has certain requirements that must be met by an IT system. The difference between the traditional and agile development is in the requirements management process and it can cause problems in a project.

A current conveyor is an active building block that can be used to implement most active and passive components. It differs from the operation amplifier in that it uses current instead of voltage. The current conveyor also has significantly higher voltage gain over a broader frequency range. To simplify the construction of analogue circuits and increase the construction efficiency it is desirable to use a top-down methodology. This means that the whole system is partitioned into a hierarchy of subsystems.

Title: The customer?s contribution to the innovation-process ? a study of using customers to discover latent needs. Level: Final assignment for Bachelor Degree in Business Administration Author: Robert Klein Supervisor: Agneta Sundström Date: 2014-06 Aim: The purpose of this study is to gain enhanced understanding of what knowledge costumers contribute with in an innovation-process lead by a producer of goods, and how that knowledge is used to fulfill latent needs. The area of research has formerly described which results customer-involvement lead to, but have been scarce in describing how results are produced. Method: From a qualitative onset, a case-study collecting data through observations and interviews capturing customer knowledge contributions, and producer use of fetched knowledge has been conducted. Data has been analyzed using a grounded theory approach. Results have been processed in several steps in which material has been categorized and enriched continuously. Result & Conclusions: Customer-knowledge is broken down into market-knowledge, everyday-knowledge, and specialist-knowledge, which all are significant to a producer of goods.

When a person arrives at the emergency ward at the Uppsala University Hospital with his or her symptoms he or she explains the problems and then a priority process starts. The staff evaluate at which emergency level the patient is located in a model called Triage. The Triage model helps to decide the priority need and is based upon templates which point out in which of the 5 categories a patient is to be placed, to eliminate any future risk regarding his or her health. A lower triage level means lower priority but implies better health when the evaluation takes place. To obtain optimal effect of the Triage model the evaluation of symptoms must be reproducible so that patients with the same symptoms are placed at the same triage level regardless of whom among the staff conducts the evaluation. The purpose of the study was to see if the resources are allocated based on priority level of the patients.

The river Göta Älv reaches between Vänern and Gothenburg and is the main raw water source for Gothenburg that supplies about 700 000 people with water. To protect and maintain a high water quality, continuously samples and water analyses are made throughout the river. In 1998 a protection area was founded between surte and Lärjeholm where the raw water intake is. This was made to increase the awareness of the importance to protect the water. However, there is a lot of contribution of untreated stormwater to Göta Älv within the protection area.Göteborg Water and Sewage Works commissioned this thesis where two areas, Tagene industrial area and Kärra residential area, with untreated stormwater outlets within the protection area are studied.

Sustainability is a term that is constantly gaining focus in our society and we are becoming more and more aware of the need to take the next generation into consideration when making decisions. The sustainable activity within the core business is growing and is also connected to profitability in ways that have not been seen before. However, the activities that are not included in the core business have not yet reached this long-term perspective. These non-core businesses within an organization goes under the term Facilities Management (FM).This paper focuses onReal Estate businesses, FM-suppliers and the relation between them.The purpose is to investigate current knowledge regarding outsourced FM-services and the real estate organisation?s use of these services.