The housing sector uses 40 % of the energy in Sweden and half of the electricity usage. Theuse of energy is the main reason to the increasing rate of carbon dioxide in the atmosphere.This is the main motive but also a wish of higher safety, that is a higher rate of selfsufficientenergy production in Sweden, we want to decrease the need of using fossil fuel. Now whenthe energy price rise, the interest in energy issues increase and more people discuss thepossibility of reducing the usage of fossil fuel. A change to renewable energy such as sun,wind and water is the only solution where we can get a sustainable development.One way to contribute to a better use of energy is to build in the principle of passive house.The house is being built with a thick and tight insulation. If you use a heat-exchanger withhigh degree of efficiency and a final heating battery on the ventilation system, the heat fromlamps, devices and the ones living in the house should be enough to fulfil the criteria ofliving.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

In Sweden the main principle is that interest expenses are deductable. The rules of limitations on interest deduction are exemptions to this main principle. The provisions, which came into force on the first of January 2009, have been inserted into Chapter 24 secs. 10 a ? e Swedish Income Tax Act (ITA).

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

The increasing road traffic in Sweden will require investments in the infrastructure that the tax withdrawal of today will not allow according to a new government report, SOU 2006:33. An existing willingness to pay for those investments has therefore become an alternative to increases in taxation to be able to cover the costs. A proposal to let the willingness to pay, alternatively increases in taxation that act proportional, decide how a cost is distributed can be said to be related, but not fully correspond, with different theories of justice described by Robert Nozick and John Rawls. It can therefore be interesting to see how the two different theories of justice are edified and how they distribute a joint cost. The aim of the first part of the thesis is to present and criticize Rawls' and Nozick's theories of justice in a common formulated economic model.

The Swedish Code for Corporate Governance was introduced on July 1, 2005. All companies then listed at OM Stockholmsbörsen A-list and those on the O-list with a market value of more than three billion SKr must implement the rules in the Code. The Code includes rules for corporate governance as a complement to the legislation. The Code is based on the principle comply or explain. This means that the companies are aloud to diverge from the rules if they explain why.

On the 1st of January 2009, a new regulation regarding interest deduction limitations was enforced. The aim was to prevent tax structure with interest deductions in a community of interest. The changes meant that intra-group share transfers, which generates an intra-group loan structure, can lead to borrower losing their right to deduct interest expenses. Except from the main rule two exceptions were also introduced. These eliminates the limitations, and accept the deductibility despite the above conditions.

År 1972 skickade NASA upp en rymdsond, kallad Pioneer 10, ut i rymden med en bild fastsatt på sondens utsida. Bilden var ett meddelande till utomjordiska varelser och illustrerade information om människan och jorden. Med bilden som en visuell utgångspunkt har jag designat en workshop för åtta gymnasielever i två olika grupper som fått i uppgift att skapa en animation att skicka upp i en rymdsond idag. Genom att omformulera den digitala berättelsens metod har jag velat undersöka hur deltagarnas process och animation kommer att formas om utgångspunkten är visuell. Jag har utifrån mina didaktiska designval undersökt vad deltagarna har gjort för egna val, material och tillvägagångsätt de använt sig av. Under projektets gång har jag samlat in empiri i form av ljudupptagningar, filmmaterial, fotografier och fältanteckningar samt analyserat deltagarnas animationer.

The thesis addresses the issue of when a bankruptcy estate, under environmental law, is responsible for the debtor?s environmentally hazardous activities. A fundamental principle of insolvency law is that the bankruptcy estate is not responsible for the debtor?s prior obligations. The environmental legal rules do not distinguish whether an injunction liability is directed against a bankruptcy estate or another operator.

In recent years, Lean has been implemented in a variety of companies with focus areas that differ from the conditions that characterizes manufacturing. This transfer has contributed to fairly superficial results because companies almost exclusively focus on Toyotas methodology and not on the goal of Lean. The effort of transforming Lean from manufacturing to any organization requires a definition on a general level and a view of Lean as a system. One of the core principles of Lean and the foundation of continuous improvements is standardized work. In product development there is a negative view on standardized work, where the engineers state that the principle is not applicable for knowledge processes that include non-repetitive and creative work.In the framework of this master thesis literature has been studied to find support that standardized work is applicable for product development and areas that include knowledge processes.

To complete an overweight treatment program is associated with better weight loss. Previous studies have in principle focused on drop-out from the entire program, not individual parts of a program. Factors previously shown to influence the patients´ weight loss results are: frequency of individual meetings with a professional, the lack of social support from family or friends, the lack of motivation and in a few studies vacations. In several studies the drop-out patients have stated that their reasons for drop-out were dissatisfaction with the staff and the program design. Drop-out has also been shown to be connected with difficulties in adherence to the diet.

To complete an overweight treatment program is associated with better weight loss. Previous studies have in principle focused on drop-out from the entire program, not individual parts of a program. Factors previously shown to influence the patients´ weight loss results are: frequency of individual meetings with a professional, the lack of social support from family or friends, the lack of motivation and in a few studies vacations. In several studies the drop-out patients have stated that their reasons for drop-out were dissatisfaction with the staff and the program design. Drop-out has also been shown to be connected with difficulties in adherence to the diet.