Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

Background: Resources that are hard to put a value on and cannot be classified as assets in the balance sheet as well as the development towards the information society has led to an increasing need and use for voluntary information in the annual reports. The increase of voluntary information can foremost be seen in the field of human resources.Purpose: The purpose of this thesis is to describe the development of voluntary information about human resources in the annual report of a number of Swedish quoted companies. The purpose is also to see if there is a difference in the development between manufacturing companies and service companies.Method: Six manufacturing companies and six service companies were chosen from the Stockholm exchange A-list. Using both a qualitative and quantitative research method the annual reports of the chosencompanies were studied for the years 1995, 1997, 1999, 2001, and 2003. A model consisting of seven categories; health, diversity, recruitment, staff turnover and comfort, benefits and motivation, education and competence development, was developed to clarify were the development took place.Conclusions: After finishing the study one can tell that the amount of voluntary information about human resources in the annual report has increased even though the percentage share of the total annual report only has increased appreciably for manufacturing companies.

Due to the forest industry downsizing, many communities in rural forest regions in Canada and Sweden are facing problems to survive. In order to create community sustainability, resilience and well-being in remote forest regions, the view on the forest resources has shifted towards multiple use, through the concept of sustainable forest management (SFM). Beside the economic and ecological elements of sustainability, the social forest values are needed, contributing to the human well-being, local participation, stakeholder collaboration, human rights and cultural connection. In this thesis the embodiment of the social component of SFM within Prince Albert Model Forest (Canada), and Vilhelmina Model Forest (Sweden) will be examined. Being partners and facing similar challenges as rural boreal forest regions, the two model forests are compared through analysis of projects and activities, conducted interviews and organization documents. Looking at projects mentioned as successful by the interviewees, they all have elements from the social values of SFM. The direction can be explained by the introduction of the Forest Communities Program in Canada, demanding the Model Forests to work towards community stability and resilience, the Model Forest organization concept itself and the way global focus are increasing around social forest values. In the future, it may be important that the role of the MFs enable some kind of political authorization and legitimacy in order to improve conflict solving and indigenous rights equality.

This thesis studied which factors affect political participation among people with physical disabilities in Sweden.? The aim of the study was to test how Civic Voluntarism Model should explain the low political participation among people with physical disabilities in Sweden, through deep interviews.? Following research questions has been studied in the thesis:? How can the Civic Voluntarism Model, based on the time, communicative skills and economic resources, explain the low political participation of people with physical disabilities in Sweden??Which other factors, linked to accessibility, discrimination and legislation, are needed to further explain and understand the barriers to political engagement and participation for people with physical disabilities?? Results about treatment, clearer legislation, economic possibilities and inclusion was central. It became important to considered that where is differences in which capabilities where are to political participation. The CVM could partly explain the low political participation among people with physical disabilities. It needs to be complete with external factors; accessibility, discrimination and legalization, to make more inclusive explanations.? .

The aim of this masters thesis is to study the reliability of the URL as the link between a bibliographic record and a web resource. The Swedish catalogue services LIBRIS and NetSök have been evaluated on three different occasions, to study how these services have succeeded in giving access to web resources by using URLs. Because URLs are changeable, we have tried to find out common characteristics of the URLs in broken links. To accomplish this study we have used a quantitative approach and evaluated five percent of the web resources in the catalogues using a random selection. We have also used documentation relevant for our study, among other things to illustrate previous studies of the nature of web resources and alternative solutions to URLs as access points to web resources.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

The aim of this Master?s thesis is to investigate how a public library should sign and organize their resources to make them as accessible as possible to the users of the library. Our theory, Paul Arthur?s and Romedi Passini?s wayfinding theory, is about how people search through information loaded environments. Our empirical material consists mainly of three parts: an inventory of the resources and guiding at Hammarö bibliotek, eight interviews with visitors at Hammarö bibliotek and observations of how visitors use and interact with the library, its resources and guiding.

This thesis discusses the global regime complex concerning the management of plant genetic resources for food and agriculture, and how different regimes concerning these resources cooperate or stand in opposition to each other. Because of changes in US patent law and the establishment of TRIPS, patent claims over plant genetic resources has increased dramatically globally. This, amongst other things, in turn has lead to the development of CBD which in turn lead to the creation of access and benefit laws in many countries. To create a free flow of genetic resources for food and agriculture the ITPGRFA, with its multilateral system, were negotiated. The aim of this thesis is to investigate which consequences the regime complex concerning plant genetic resources for food and agriculture can have on the rights of small farmers, agricultural research and food security in the global South.

The environment has become an important part in people´s lives, and in today´s society stakeholders demands have increased upon companies when it comes to sustainability reports. How these sustainability reports are designed depends on whom it?s for, laws and regulations, and the companies own norms and values. The purpose of sustainability reports is to measure, monitor and compare a company´s enviromental impact. It?s not only about integrating economics, but also enviromental and social standards together to get both financial and competitive advantages.Sustainable Value method is a new model and is the first real method that can be used to evaluate a company´s resources, both financial, social and enviromental to a sustainable value.This model is used to compare the resource efficiency between companies.In this thesis, a documentary study with an experimental approach has been made.Sustainability reports from six selected companies (in the engineering and forestry sector) have been investigated with respect to their accounting for carbon dioxide, and an experiment using the method ?Sustainable Value Approach? was subsequently performed.

The aim of this Master's thesis is to examine what effect two different models of acquisition have on user satisfaction with information resources at academic libraries. The two models examined are the traditional model where a subject specialist librarian makes the selection, and the user-governed model where the larger part of the selection is based on user requests. The scope is the libraries of Roskilde University, which employs the traditional acquisition model and Malmö University, which employs the user-governed. Both libraries have a user-oriented approach to acquisition. The study encompasses a close examination of the acquisition policy through document analysis and interviews with the librarians in charge of acquisitions at each university, as well as a user-satisfaction survey among the professors and senior teachers on two faculties at each university respectively.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The purpose of this thesis was to analyse, model and finally generate dynamic vehicular motions in a train. The objective with the analysis was to find important motions for a realistic train experience. The motions from the analysis were then weighted against possibilities for generation in a motion platform.A dynamic motion model was created to model the selected motions. The model was implemented in a simulation environment, more specifically MATLAB/Simulink. The simulation environment was used to simulate the model and to generate outputs to control a motion platform.

This project consists of an adaptation, trial and evaluation of a model for practicing. Based on prior research I created a model aiming mainly to raise a musician?s self- awareness around the different parameters a performance consists of. An additional wish was for it to simultaneously assist the musician in monitoring his or her progress. With video recording and self-evaluation as the two main parts I tried the model by using it over a period of three months.