Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

This paper attempts to study the Swedish tariffs during the interwar period in order to asses the level of protectionism in Swedish tariff policy during the period. It is foremost the nominal tariffs that are studied, however an estimate of the effective rate of protection of the tariffs is also calculated for a number of goods. In order to asses the level of protectionism, the Swedish tariffs are also compared with Finnish tariff levels during the interwar period.The sample of Swedish tariffs that have been studied in this paper include the fifteen most important kinds of import goods and the fifteen most important kinds of export goods. The nominal tariff of each kind of goods have been weighted by their share of the total import value.The Swedish specific tariffs did not change much during the interwar period except for a few goods such as petroleum, coffee and automobiles. The fluctuation in nominal tariffs were in most cases the result of the steep fall in prices during the period.

Aim: The aim of this study is to describe which messages and by which rhetorical means were communicated in political TV-advertisement in Finland and Sweden. The study also aims to analyze how the rhetorical choices were influenced by the political and social context in these countries.Material: Two TV-commercials from the latest parliamentary elections in each country were chosen. The leading left-wing and right-wing parties were chosen from each country.Theoretical perspective: This study is based on theories on political parties? vote maximization and the development of the modern electoral campaign.Methodology: The method used in this study is rhetorical analysis.Results: All commercials had similar themes and were characterized by a low level of conflict. This is related to the common Nordic context in the two countries.

The purpose of this essay is to analyze the ideological development of the former communist parties and the contemporary left-wing socialist parties of the Nordic countries. It is aimed at the two decades that have passed since the collaps of the Berlin wall and the parties at hand are; the Norwegian Sosialistisk Venstre, the Danish Socialistisk Folkeparti, the Swedish Vänsterpartiet and the Finnish Vasemmistoliitto. Since the 1960´s these parties have undergone major ideological changes with reference to a widening of their political agenda to an inclusion of democratic ideals as well as the new ideologies of feminism and ecologism. Thus reforming them into modern left-wing socialist parties at different times. The main hypothesis is formulated from the idea that there must be a connection between the startingpoint of reformation and the degree of modernism/traditionalism they show today.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The purpose of this thesis was to analyse, model and finally generate dynamic vehicular motions in a train. The objective with the analysis was to find important motions for a realistic train experience. The motions from the analysis were then weighted against possibilities for generation in a motion platform.A dynamic motion model was created to model the selected motions. The model was implemented in a simulation environment, more specifically MATLAB/Simulink. The simulation environment was used to simulate the model and to generate outputs to control a motion platform.

ABSTRACTThis C-essay in political science is written by Ingrid Karlsson, autumn 06. Advisers: Gregg Bucken-Knapp and Susan Marton.? The identity of Tornedalen, a study about identities and its affect on the view of the Swedish state.?The purpose of this essay is to investigate the identification amongst the population in Tornedalen and if their identity affects the view of the Swedish state. I am going to look into how people from that region looks upon their identity. Do they consider themselves as Swedish, Tornedaling or Finnish? I have two research questions on this topic: 1) What does a person from Tornedalen consider their identity? 2) If the way the Swedish state treated Tornedalen, from around the middle of the nineteenth century to the middle of the twentieth century, has affected the way people from this region looks upon their own culture, and if the treatment has affected peoples view of the Swedish state.

This project consists of an adaptation, trial and evaluation of a model for practicing. Based on prior research I created a model aiming mainly to raise a musician?s self- awareness around the different parameters a performance consists of. An additional wish was for it to simultaneously assist the musician in monitoring his or her progress. With video recording and self-evaluation as the two main parts I tried the model by using it over a period of three months.

In this report a model was constructed in order to determine how a number of covariates influence the gross domestic product, GDP. The covariates were chosen depending on their expected influence on GDP, for example education and life expectancy. The data used in this report are collected from the World Bank. The model to describe GDP has been calculated using multiple line arregression. In order to reach a reliable final model the number of covariates has been gradually decreased to eliminate insignificant covariates.

My Finnish grandfather had a passion for architecture, eventhough he wasn?t an architect. In the end of the 1950s he builta wooden summerhouse on a lot outside of a small villagecalled Lempäälä, close to the city of Tampere. Today the lotbelongs to my mother. Every time I visit our summerhouse, itmakes me want to do as my grandfather did ? to build a smallhouse next to it.My project is a proposal for a wooden house on mymothers lot.

AbstractHudiksvalls coordinating model - a model to make cooperation easierCamilla Andersson and Åsa GradinThe purpose of this study was to examine the experience each one of the administrators have of their own new model in Hudiksvall to make cooperation easier for the three different administrations in Hudiksvalls municipality. The study will focus on the administrators experiences of Hudiksvalls coordinating design. Questions of the study were: How is the influence of the model on the rules? How is the influence of the model on expectations and parts? What kind of influence did the model have on the responsibility distribution? What kind of influence has the model on the responsibilities at the transfer of costs? To answer the questions of the study we applied a qualitative method, it was made through a standardization interview guide and open questions, with six of the dealing officers who works with the model. Some of the results wich can be discern are by an economic character, andfor the clients that they won`t be passed around the administrations in the community, they get the right help, quick and safe.Key words: cooperation, coordination..

This report present a working model for simulation of what happens to colors displayed on screens when they are observed through optical filters. The results of the model can be used to visually, on one screen, simulate another screen with an applied optical filter. The model can also produce CIE color difference values for the simulated screen colors. The model is data driven and requires spectral measurements for at least the screen to be simulated and the physical filters that will be used. The model is divided into three separate modules or steps where each of the modules can be easily replaced by alternative implementations or solutions.