The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

IT is often seen as a solution to many problems concerning effectiveness in organizations. Information systems within the healthcare sector is often viewed as medical devices rather than just systems or services. These medical devices are thoroughly regulated by laws, standards and certifications. In this study I participated in an innovative project that aimed to bring new life and use to the old fashioned patient journal by giving it a visual representation through the use of an avatar. I aimed to study the effects of regulators connected with the patient journal as a source of information for the innovative project.

Title:Cash is King ? or is it?Level:Final assignment for Bachelor Degree in Business AdministrationAuthor:Caroline Eng and Jessica HillbergSupervisor:Jonas KågströmDate:2011- 06Aim:There is a long tradition of trading the currency and the first coins can be traced back to Persia already 500 BC. With the modernization of society and the technological advances we have made in recent years, we are now using electronic payments more and more. We pay by card, Internet banking and mobile phone in addition to cash. The purpose of this paper is to follow Swedbank project "cash smart" and have it as a basis when we examine if we are heading for a cash-free society and what obstacles and opportunities there is for a cash-free society.Method:We have used a qualitative method to conduct interviews with two individuals involved in the project "cash smart" at Swedbank in Gävle.

This paper aims to shine a light on the challenges connected to the implementation of a process focused way of thinking in a public service organization. To this we have conducted a series of qualitative interviews, primarily from participants of a university driven project. The project aims to teach decision making employees of public service organizations how to use process modeling techniques to increase their efficiency. We have also interviewed the teachers who have taught the courses included in the project. As a final point of view we have also interviewed a researcher and IT consultants to compare novice users with experienced users of process modeling techniques.

The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

The valleys southwest of Storuman has been exploration targets for sulfide mineralizationslike the Laisvall Pb-Zn deposit since the late 1900 when several mineralized boulders wherefound. No previous glaciogeological survey has been made. This report focus on thedirections of local paleoiceflows and glacial transportation in the area of Skikkisjön, thelocation of the westernmost mineralized boulder, found in 2010. The aim of this study hasbeen to create a picture of the glaciogeological evolution of the area in order to determinatepossible hostrock areas. My results suggest that the geomorphology and transportationoccurred during a western icedivide located in the nearby mountainrange.

The examination has been performed at Bjerking AB, which is an architectural and engineering company. Bjerking AB has the ambition to be a member of Green Building.The Green Building program developed in year 2005 by The European Commission, the program is an environmental system with the aim to improving energy efficiency within the sectors of non-residential buildings. The minimum requirements to participate the program are following: in new-built buildings the calculated energy consumption must be 25 % lower than the requirements in the BBR (Building regulations) and in refurbishment the reduction must be 25 % lower than before the optimization.The aim of this study has been to examine and review the company Bjerking AB's energy efficiency work in the project of building the school/kindergarten S:ta Maria Alsike, where the goal is to get this building Green Building classed. A description of requirements to become a member of the Green Building has also accomplished in the thesis.The methods performed in this study are literature review, searches on the Internet, studies on the project database for facts/values, calculation of energy consumption and interviews of members of the Green Building. The following issues have been dealt with in the report;-          Did the building in the project manage the requirement to achieve an   energy consumption that is 25% lower than the requirements in BBR?-          What technical measures/system was selected in the building?-          What kind of cooperation was the project based on?-          What is required for consultancy companies and real estate owners to become members of the Green Building?The study of the project and calculation of estimated energy consumption in the building, give the result 47 kWh/m2, year.

This report describes the procedure in which we accomplished our task, which was to implement a present algorithm. This was made using C++. The algorithm is developed by Sasan Gooran, who is our examiner in this project. The algorithm uses an iterative method to produce the halftoned images. The reason for this project is to speed up the existing program which is made in Matlab.

The task was to deliver a solution that could be implemented in today?s production of the FH truck. To make the project successful it was most important that the end result had a high maturity level. For that reason an analysis of ergonomic, laws and regulations, and possible materials where conducted. To show that this project is profitable and can be realized a ruff cost estimated of material and tools is added to the research.

This report contains a study of replacing nuclear power with biofuel. The nuclear plant, OKG north of Oskarshamn in Sweden has been chosen and an extensive literature study about the nuclear plant has been implemented. The main aspect of this report is the availability of biofuels and whether it would be economically sustainable. Sweden?s most common biofuels are examined with regard to scope of use and potential.

This bachelor thesis portray a project where the main task were to develop a computer based system prototype for handling of absence report at the upper secondary school af Chapman in Karlskrona. The project has been conducted in cooperation with students from the university programs software engineering and information economy at Blekinge Institute of Technology. Our task as MDA-students have been to survey the process of absence report of today through field studies and give a proposal of a graphical user interface which later were developed by the software engineers. The thesis also handles the cooperation with other students from other university programs..