Lao People?s Democratic Republic (PDR) is a country where the majority of the population works within the sector agriculture in one way or another. The number of goats are increasing and the animals can be an important income source for families. However, during the dry season, lack of feed is a great problem for the farmers. Fodder trees have shown great potential as dry season feeding, due to that the trees often hold green and fresh leaves a long time into the season, compared to grass that dry out quickly.

The main goal with the master thesis has been to do a status evaluation of the chain machinery with its start chain and wire to secure the production on a short basis due to that a reconstruction is not planned at this time. An evaluation of the condition of the start chain and the rollers in the chain depository has been done. An offer has been requested for a new start chain and the evaluation of the start chains may be a basis for the decision taking. The production has been able to go on, although it has arisen some problems which have been difficult to find the causes for. There is no gathered ?picture? of the machinery status and a mapping of each machinery has been compiled of comprehensive logs.

In Sweden, large scale planting of Lodgepole pine (Pinus contorta var. latifolia) started in the beginning of the 1970?s. At first, the aim was production of pulpwood, but later, also production of timber became considered realistic. Today, Sweden has more than 520 000 ha of Lodgepole pine.

Reporting harvested and forwarded volumes are important for the forest industry as it provides information of the size of the stock and facilitates logistics. Figures from Holmen Skog show low reporting frequency. The purpose of this study is to investigate the reason and find suggestions for improvement. A total of 17 machine operators were interviewed using a questionnaire combined with open questions. The results show that the majority of the machine operators find it simple to use the reporting system, although, some of them reports that it doesn?t always work as supposed to.

Due to the technical development the enterprises of today are forced to creative thinking when it comes to marketing of their products. An example of one of these new methods are the development of product placement which has come to an interesting turn namely advertiser funded programming (AFP). Instead of the product just being a small part of the storyline it has become the story itself. The purpose of this study is to analyse how the advertiser funded tv-production Roomservice, a Swedish home styling program, communicates with it?s viewers as well as how they perceive the message.

Beef cattle wintering outdoors should be provided a shelter, e.g. a type of barn or corresponding. This type of production requires appropriate soil types and secured animal welfare. For example, a clean and dry resting place needs to be provided to the animals. To receive an exemption for buildings the farmer has to have something equivalent that provides an adequate shelter.

Green manuring is a way of creating an organic fertilizer by growing a crop that is mowed down. Besides the fertilizing effect this method has been shown to have a positive influ-ence on soil organic matter as well as weed flora, and green manure is an important me-thod of weed control in organic farming in parts of Sweden. However, the release of nu-trients from the green manure varies and can therefore be difficult to control. Risks for losses of nutrients are also present. Although the area of organic farmland is increasing in Sweden, the use of green manure is decreasing.This report contains a literature study which compiles research on the functions of green manure in a cropping system and also how the crop can be used if harvested, for example to produce biogas.

This Bachelor-paper is an investigation of organisational flexibility in Swedish andPolish television companies. The essay is based on four main questions which is thananalysed by looking at different categories that defines a flexible organisationalstructure.The questions are:? What is the internal and external perceived judgment about the TV-channelsorganisational flexibility?? What are the differences regarding Public service channels in Sweden andPoland as well as the differences between commercial channels?? What are the differences regarding public service- and commercial TVchannelsin Sweden as well as in Poland? Which of the companies are considered being the stronger and the weakest inan organisational flexibility point of view?In order to answer these questions have we used following main theories.? Readiness for business process reengineering - Abdolvand, N. & Albadvi, A.& Ferdowsi, Z (2008)? Decisionprocess - Jacobsen D.I.

This candidate thesis contains the possibility of expand the Swedish photovoltaic market through photovoltaic cooperatives and a photovoltaic exchange. In the current situation there is a lot of problems with production of electricity from photovoltaic, that?s why we show some possibilities how to avoid these. To understand the problem with photovoltaic produced electricity we first give you a background.We show how to expand the Swedish photovoltaic market by describing how a photovoltaic cooperative and photovoltaic exchange could work in Sweden. It have been confirmed from our market research that the interest of photovoltaic cooperative and exchange is high.To find out how profitable photovoltaic is in Sweden, have three projections been made.

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

Syfte: Syftet med studien är att belysa forskning och litteratur kring Lean Production utifrån två vetenskapliga synsätt. Studien syftar även till att undersöka en organisations införande av och arbete med Lean Production, för att kunna ge praktiska bidrag om hur detta arbete kan fortskrida.Metod: Studien har genomförts med en kvalitativ och öppen ansats inom ramen för en fallstudie i samarbete med Sandvik Materials Technology. Empiriskt material har samlats in genom intervjuer och observationer med och av operatörer, produktionsledning och stabspersonal. En omfattande analys av litteratur och forskning kring Lean Production har legat till grund för en teoretisk referensram.Resultat & slutsats: Belysningen av Lean Production visar att systemsynsättet beskriver konceptet som ett säkert recept för framgång, trots sin förenklade syn på organisationers påverkan av omvärldsförändringar. Det socialkonstruktivistiska synsättet visar att Lean Production har en legitimerande funktion i organisationer, men ger liten kunskap om de förändringar som sker i organisationer.

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.

Our project is divided into two parts, one production and written report. The main focus was the production part, were we used PHP to create simple solution for handling SMS and MMS with direct communication with the mobile operator server. We communicate with sockets and can handle CIMD2 and MM7 protocol. To get our components easy to use we have created two classes to handle SMS and MMS. To demonstrate our technical platform we created a website were you can create an account.

The housing sector uses 40 % of the energy in Sweden and half of the electricity usage. Theuse of energy is the main reason to the increasing rate of carbon dioxide in the atmosphere.This is the main motive but also a wish of higher safety, that is a higher rate of selfsufficientenergy production in Sweden, we want to decrease the need of using fossil fuel. Now whenthe energy price rise, the interest in energy issues increase and more people discuss thepossibility of reducing the usage of fossil fuel. A change to renewable energy such as sun,wind and water is the only solution where we can get a sustainable development.One way to contribute to a better use of energy is to build in the principle of passive house.The house is being built with a thick and tight insulation. If you use a heat-exchanger withhigh degree of efficiency and a final heating battery on the ventilation system, the heat fromlamps, devices and the ones living in the house should be enough to fulfil the criteria ofliving.

During the last decades the housing sector has increased continuously, and housings and services accounted for 40 % of the energy usage in Sweden during 2011. The expansion in number of buildings in society has resulted in an increase in both energy usage and emissions of greenhouse gases. It is crucial to enable a sustainable development of society and as a result, the demand to reduce the emissions of carbon dioxide is a current question. In this study, the carbon dioxide emitted from the housing sector in Stockholm is estimated. The housing sector can be divided into different types of houses such as apartment blocks, single-family houses and holiday houses. By collecting information of the energy purchased in respective households, a computational model is generated that calculates the total emission of carbon dioxide.