Lundbergs Plåt AB is a small company situated in Jönköping. Their main task is to process different kinds of steel such as stainless steel. Lately, they have shown an interest in Lean production.On the basis of the situation mentioned above, we developed the purpose to find and decrease the non value-added wastes in the production at Lundbergs Plåt AB. Out of this, we also developed and answered two questions: Which wastes can be found with help from a value stream mapping (VSM)? In what way can these wastes be reduced and how can these reductions contribute to an improved production? VSM is the method used to find the non value-added wastes.

The agricultural sector accounts for about 13 percent of the total load of greenhouse gas emissions from Sweden (Swedish Environmental Protection Agency, 2007). The Swedish objective to reduce the greenhouse gas emissions with 40 percentage units to the year of 2020, based upon the year of 1990, might imply stricter regulations for Swedish farmers. A regulation or other forms of economic incentives is probably necessary to reduce the emissions originating from the agricultural sector. This study aims to investigate the economic and managerial impact on two agricultural firms with differing production system given that a constraint on green house gas emissions is introduced. Gases included in this study are carbon dioxide, methane and nitrous oxide.

Lip force has been found to affect the ability to achieve satisfying speech production and swallowing. A normative value for lip force in adults has been measured to 15 Newton (N). Corresponding value for children measured with Lip Force Meter 100 (LF100) does not exist. In the current study lip force was measured in children between the ages of five and ten years. The aim of the study was to obtain normative values for children with typical development in separate age groups.

Urbanisation has increased the distance between the urban and the rural. Urban agriculture can be a solution to overcome that distance. The characteristic of urban agriculture is the intensive production in intra urban and peri-urban areas. Until 1950s food production in cities was an important part of the urban economy and the urban food supply. Since the 1950s the urban located production of food has almost ceased in Sweden, partly as a result of cheap food imports.

Today?s community requires an increase in food production. Animals are today bred so that they produce more than their ancestors did. Production has been the most important and breeds with the highest production levels have therefore become popular. Many of the old local breeds have become extinct or are about to become extinct because of this trend.

This study investigates a farm in Dalarna which includes 16 ha of farmland and 1, 7 ha of pasture. The purpose is to find out if it is possible to start an animal production in Dalarna. The study is set only to compare spring lamb production with nurse cow production. There are two buildings on the farm that can be used for this purpose. One is an old cowshed, and the other is an unused silo for silage with a roof on top. Both of the buildings are compared to every alternative in the calculations.

Wind power is expanding rapidly in Sweden. Increasing amounts of wind power sets higher requirements on balancing power and grid expansions and would affect the whole Swedish electricity system. The aim of this report is to examine the factors affecting the wind power expansion in Sweden. How many wind power plants projects will obtain building permissions and what costs and revenues can be expected? How much balancing power will be required and does a changing geographical distribution of the wind power plants reduce the need of balancing power?A survey of the county board?s official applications has been made and out of all the applications, corresponding to 80 TWh produced per year, about half of the applications are expected to obtain a permit with a major portion of them located in the north of Sweden.Especially older wind power plants, deriving revenue from Nord pool, find themselves today in a complicated financial situation.

Magnesium is an essential mineral that is important for several physiologic and biochemical processes in the body. Deficiency of magnesium is mainly associated with grass tetany, but can also appear in cows during the indoor period. Since long it is known that potassium has a negative effect on the absorption of magnesium. Due to the fact that potassium fertilisation leads to a higher potassium content in forage, it is of interest to study interactions of potassium on the magnesium balance in dairy cows. There are few studies about magnesium feeding to dairy cows in Sweden and the purpose of this study was to investigate how much magnesium and from which feed-sources dairy cows in Sweden get their magnesium. Data was collected from seven farms in the northern part of Uppland and from seven farms in Skaraborg in Sweden.

Metso Paper in Karlstad is acquiring Kvaerner Pulping and Kvaerner Kamfab, also located in Karlstad. Following this acquisition, there are going to be changes in the organizational structure and some employees might even loose their jobs. There are guidelines from the European Union how to handle situations like this, the purpose of these are to protect the employees. There are also Swedish laws that regulate the protection of the employees when a company is acquired, who is going to keep their job and who is to be made redundant.The transaction between the companies is large why they need an approval from the European Union. The European Union has certain demands for the approval.

Many companies are currently working to optimize and streamline their processes and production lines to achieve higher profitability. In increasingly competitive markets, companies are working to find solutions to increase the value of their production with such a small use of resources as possible. A tool used to accomplish this is the Lean management system. Lean comes from the production system that Toyota has been developing since the early 1900's, The Toyota Production System (TPS). The Lean philosophy helps companies, by working towards continuous improvement in its operations, to achieve higher customer satisfaction, more efficient production and ultimately higher profitability. Many companies are working to implement Lean in their organization. But there are many who fail to implement a complete change towards Lean.

The interest in small-scale electricity in Sweden has increased strongly in recent years. The interest is noticeable both among politicians to increase the share of renewables in the energy mix, and among electricity consumers to partially replace purchased electricity with self-produced. This has resulted in a significant increase of electricity production in low voltage grids in recent years, and the trend appears to continue in the coming years. The majority of the new production plants are solar cells, followed by wind turbines, and it is also in these the greatest efforts are made in this paper.Distributed generation is often seen as something positive since it will contribute to reduced transmission losses and reduced voltage drop in the networks, and that it increases the share of electricity from renewable sources. In cases where the grids are not strong enough, or in other ways not adapted to manage the installed production, power quality may be adversely affected.

The emergency medical care in Sweden has been under persistent debate, due to factors such as long waiting hours, inefficient patient flow, and understaffed departments. In an effort to meet the critique and with a willingness to improve the problems, an increasing amount of emergency clinics are adopting theories and models within Lean. Positive outcomes are evident, there has been some criticism directed towards Lean. Among these is the argument that in order for Lean to be successful it needs to be used within standardized and foreseeable processes, and that it therefore only is applicable to those kind of processes found within industrial production. This prompted the question of whether Lean was a suitable strategy within emergency medical care, considering the large variation of patients and non-foreseeable processes that in fact share little resemblance to that of industrial production.

I contacted the production company Salmonfox in the hope that they would have any projects that they needed help with. It showed that Salmonfox just started up an old project that they needed to complete. They wanted my help to edit some trailers and one crowdfundingfilm for the short film called, Captain Sweden (Kapten Sverige). Salmonfox are hopefully going to use the different trailers and crowdfundingfilm to promote the short film and get help with the funding to make a feature. The project began with a pilot study in which I made a time plan and a requirements plan, where the different requirements were set.

Telepresence production handlar om att kommunicera med video och audiobaserad teknologi i realtid över distans och att generera en känsla av närvaro fastän man fysiskt är på olika platser. Forskningsområdet är ett tvärvetenskapligt ämnesområde som innehåller datalogi, socialpsykologi, kognitiv psykologi och perception så väl som konst och storytelling. Den här uppsatsen behandlar främst den process som utformning av ett videomedierat möte innebär. Det finns olika variabler som sägs påverkar upplevd närvaro, men då människors upplevelser är subjektiva är det en stor utmaning att söka generella slutsatser. Uppsatsen är avgränsat till att endast behandla yttre faktorer.

AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.