Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

Studien underso?ker mo?jligheten att anva?nda ledande partiklar besta?ende av silver- belagda kopparflingor, fo?r att tillverka konduktiva ledningsbanor pa? textilsubstrat. Syftet med denna studie har varit att tillverka de banorna med hja?lp av screentryck- teknik. Sammansa?ttningen av bela?ggningsformuleringen har en stor inverkan pa? den be- lagda textilen och de ledande egenskaperna.

The Sheep is the oldest livestock, and has been in Sweden for 4-5000 years. Thanks to that you can obtain skin, as well wool and meat. Therefore it was an important animal. Sheep production has increased, strongly lately due to the pasture support. The purpose of this paper is to find out what kind of different EU-subsidies you can get and to compare the subsidies in Öland and the main land. Sheeps are very good conservationist with grass, bushes and herbs, because of different grazing lands hardness and growth is it important to control the pasturage strain. A good way to regulate this is to have different enclosed pasture to switch between. I have been studying the different EU-subsidies.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

Until 2020, 49% of Sweden's use of energy must derive from renewable sources. Greenhouse gases must as well decline with 40% compared to 1990 as a part of Sweden's 16 environmental objectives. Biogas is part of the effort to achieve these objectives, but as the demand for biogas increases, more substrates are needed to meet the demand. The purpose is to investigate the conditions for pea residue as substrate by performing lab-scale mesophilic digestion with different fractions and notch lengths and then to summarize pea residue as a substrate for biogas production. During anaerobic digestion, 1000 ml bottles were used as reactors for digestion.

Lean Production har sedan länge enbart varit förknippad med tillverkningsindustrin och främst Toyota genom Toyota Production System(TPS). På senare år har Lean Production i allt högre grad introducerats och integrerats i tjänsteföretag under beteckningen Lean Service. Bankbranschen är en bransch där aktörer globalt anammat de bakomliggande filosofierna av Lean Production och Lean Service. I det här arbetet har en undersökning gjorts kring huruvida Lean Production existerar inom svenska banker och om så är fallet hur filosofierna inom Lean Production präglar bankerna. De tre bankerna som valts för undersökningen är de svenska storbanker Nordea, SEB och Handelsbanken.

One of the most distinguishing features of contemporary globalisation is production fragmentation, a splitting up of the manufacturing of a good into several different stages. Production fragmentation creates new opportunities through vertical specialization; a country incapable of mastering the entire production process may specialize in the manufacturing of one separate part. The aim of this thesis is to examine to what extent international integration affects a country?s ability to engage in vertical specialization in an industry characterized by production fragmentation. The analysis focuses on the european integration process over the last decade, where countries in eastern Europe with relatively low labour costs have been integrated with more capital abundant western economies.

The intrest and development of bioenergy and energy from renewable sources in Sweden has increased rapidly over the last few years. There are a whole lot of alternatives for those who would like to venture and invest in renewable energy production. Production of renewable energy opens up many opportunities for forestry and farming to venture a new branch of production, on basis of the primary production. Several of the new energy sources grows on farmland or in the forest. The opportunities exist in the primary products, as well as in refining and reselling, in the value chain of energy. The starting-point is the Farmer as an energyproducer. This master thesis studies the nature of farmer-own firms, who has invested in production of renewable energy.

Fossil fuels are affecting our climate negatively and there is a limited amount of them in the world, which leads to the importance of finding alternative fuels. One alternative is biogas, which is produced though a digestion process of different organic materials in a biogasreactor. Organic substrate that comes from farms has the biggest potential to increase the production of biogas in Sweden. Primarily crops from farms, but also waste products like manure are of great importance.Today there is a calculated theoretical potential for biogasproduction of 14TWh per year, which is around ten times larger than Sweden?s production today.

Hemp has been used for textiles for a long time in history until it became illegal to grow in many countries in the 1930s. It is interesting from an environmental point of view because it doesn?t need any pesticides and in most locations it doesn?t need any irrigation either, compared to cotton, which normally requires big amounts of both pesticides and water for irrigation. Hemp is a bast fiber, which means that the fibers are located on the bast of the stem (on the outer layer of the stem). Therefore they cannot be spun directly, they have to be removed from the stem first.

Many companies do not register all the stops that occur in a production plant, it often takes longer to report than to fix the problem. If no problems are registered, you cannot trace where the problems arise.This master thesis was performed at AcobiaFLUX and they have noticed an increased demand from their customers to trace problems raised in their processes. The aim of the thesis was to find out how a tool to monitor a process best could be developed. Then the most essential from the theoretical base was developed into a useful tool for operators. For the operators to know if the process utilizes the full capacity of a process, the tool presents a measure of the Overall Equipment Efficiency, OEE.

Trees in urban environment are exposed to extreme conditions, foremost the ones that grow in the hard packed soil along our streets. They are also exposed to damaging insects and fungal diseases both local and new ones spreading from South Europe. The global warming with warmer temperatures provides a longer growing season, making it easier for insects and fungus to establish a habitat. Based on these facts new tree species need to be available for future urban plantings.To determine what these trees would be an interview study began. Six people were selected who have experience in the field of urban environment planting.

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.

This paper is about the new methods and metrics used in industry and business today striving for better revenues and larger market shares. It investigates the relations between the old fordistic and tayloristic way of manufacturing and compares it to the models used in industry today for being competitive, seeking to please customers and becoming more flexible. More specific the paper is about if Six Sigma and lean production are the key for succeeding these days. SKF:s factory in Gothenburg and other companies will make an example for how these methods are used in practice.The aim is to try to answer if these systems with inherited tools and methods are the right way to get the flexibility that is needed for being able to deliver the right goods to customers and market. For a company to be flexible decisions must be made fast and needed changes must be able to be done easy and without too large costs and investments.