In recent years the construction industry has been exposed to increased time pressure which has resulted in a higher amount of wastage. Today 35 % of all construction projects in Sweden is "wasted". Time pressure has risen due to increased competition on the market, with more actors entering the construction business, therefore profit margins decreased which has led to a more pressing need for decreasing the amount of wastage.Bravida is Scandinavia's largest supplier of installations and provides specialist services in electrical installations (heating and sanitation), and ventilation. Mahdi Bawaqneh's task was to investigate where, how and why wastage occurs in the company's projects and how to prevent such wastage. The thesis covers the subjects of lean production, communication in projects and planning of projects.

This project is about development of virtual drums for iPhone and iPad. The project aims to provide the company Toontrack AB with a good foundation to build drumbased apps. The focus has been on getting a quick response when playing and that user interfaces should be easy to use, intuitive and customizable. The result is impressive and both audio and graphics are of excellent quality thanks to good collaboration with Toontrack, that previously has developed drum-based software. The drum kit offers a variety of articulations and even the ability to play various dynamics, although the screens are not pressure sensitive..

AIMS AB is a Swedish company that develops and sells inertial sensor systems. A new product is under research which basically is an aided inertial navigation system where unwanted drift is eliminated. This can be done by integrating a GPS reciever into the system and fuse measurement data from GPS and IMU. Such a product is useful in racing, where engineers always are searching for the optimal performance and the shortest lap times. Today the only feedback the engineers and mechanics get from their work is the driver?s comments and lap times.

This work is about presenting the weave in a new and different context, by bringing textile and glass together. The work is characterized by material and shape experiments with silver and copper weave and hand blown glass. From experiments and sketches, the work has resulted in four sculptures, symbolizing four selected stages in a lifecycle; the birth, the development, the maturity and the death. One important part of the work has been to combine different materials and techniques.Studies of literature, sketching, handweaving and integration of silver and copper weave in the glass have been important methods in the working process. Inspired by the flower, the human being and the universe, a story about the life cycle has taken shape.The paper describes the working process with choices and analyses.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

Hoppsasteg ? med känsla av glädje är ett examensprojekt som pågått under 20 veckor. Namnet har jag valt för att det är en känsla som jag vill uppnå under perioden. Syftet har varit att genomföra projektet med lust, göra figurativa, svartvita mönster med ett tecknat uttryck och att göra en flexibel möbel. Mönstren har ritats i tusch, det har tryckts på både tyg och tapet.

I traditionella fältförsök har den vanligaste metoden för att bestämma biomassa ochkvävemängd varit att klippa prover i den växande grödan. Denna bestämning blirtidskrävande och på så sätt dyr, vilket gör den svår att utföra flera gånger under enväxtsäsong. Efterfrågan har därför vuxit efter en tillförlitlig metod som är effektiv och somdärmed gör det möjligt att mäta med tätare intervaller, men som ändå inte är oskäligt dyr.Detta examensarbete har inriktat sig till att undersöka om grödors reflektans som mäts meden hyperspektral sensor kan vara användbar för att bestämma biomassa, kvävemängd ochkvävehalt och på så vis vara användbar i försöksverksamheten. Dessutom har metodenbildanalys jämförts med sensormätningar.Försöket startade 2010-04-16 och pågick med löpande mätningar till 2010-06-30 i sjujordbearbetningsförsök. För att mäta reflektansen har Yara?s handburna sensor använts,vilken mäter grödreflektansen mellan 400 och 1000 nm.

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..

This master thesis is commissioned by Permobil AB. The report describes thoroughly the developing process of an adjustable backrest for wheelchairs. The target group for the backrest are people that suffer from scoliosis or other spinal diseases. Because of insufficient pressure distribution usage of traditional backrests is not an option for them.The current solution has got a frame that is made by several adjustable links that is held in place by friction. Between the links velcro tapes are attached that is adjusts the depth.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

Syftet med rapporten är att utvärdera och jämföra två standarder, AATCC Test method 198-2011: Horizontal Wicking of Textiles och AATCC Test method 197-2011: Vertical Wicking of Textiles. Standarderna publicerades år 2011 av American Association of Textile Chemists and Colorists. Standarderna mäter wicking, det vill säga, med vilken hastighet som vätska transporteras genom textil, med en horisontell och en vertikal testmetod. Hastigheten anges i olika enheter beroende på standard, enheten för AATCC Test method 197-2011: Vertical Wicking of Textiles är mm/s och AATCC Test method 198-2011: Horizontal Wicking of Textiles anges i mm2/s. Skillnaden i enhet och mätmetod innebär att standarderna inte kan jämföras rakt av genom resultat och mätvärden mellan de båda standarderna.

Reinforcement is of great importance to fulfill the dimensioned strength of a concrete construction. This requires that the work needs to be carried out with adequate results that neither endangers the workers or the safety of the construction. Progressive development of the planning phase, construction documents, and construction methods is in constant need since the technology constantly evolves.In order for contractors to be able to get acceptances from their quotations requires that they have to increase their working pace in order to be able to leave a quotation with a lower price than the competition.Due to the increasing pace the different parts involved in the construction process is subjected to time pressure. The design stage, construction documents, work preparation and the execution are all affected when everything has to be finished quickly. To avoid problems, it is required that all parts are able to deliver good quality solutions and results under the influences of time pressure, which is not always easy.

Wireless sensor networks have the potential for becoming a huge market. Ericsson predicts 50 billion devices interconnected to the Internet by the year 2020. Before that, the devices must be made to be able to withstand years of usage without having to change power source as that would be too costly. These devices are typically small, inexpensive and severally resource constrained. Communication is mainly wireless, and the wireless transceiver on the node is typically the most power hungry component.

Regionalization has become a catchphrase in European countries during the last twenty years with the establishment of the European Union. An ideational development has occurred during time towards emphasing more politicially powerful regions with the idea of new regionalism. Sweden represents a deviant case study, where regions historically have been politically weak and where Sweden has been characterized as a strong unitary state. The aim of this paper is to analyze the political debate in the Swedish parliament concerning the implementation of a stronger regional level (storregioner) during 2007-2010 and to determine if the debate can be characterized as a case of depoliticalization. The theory of depoliticalization have been introduced by Richard Katz and Peter Mair to explain why political parties through external pressure from europeanisation and globalization tend to become more consensual with similar political agendas, leading to a diminished the lef-right scale.

This report contains a degree project made by the mechanical engineering students Lennart Andersson and Daniel Jansson. The project has performed in assignment by SOMAS Valves AB in Säffle. SOMAS are leading in development on control and on/off valves. To maintain this position they always want to improve their products. One way in this development is valves that are more tightened.The purpose with our project was to investigate another seat design on a HiCo (High Cobalt Alloy) seat to a SKV 150 PN 25 valve and compare this to an original HiCo seat.By modifying the seat on a ball valve we want to achieve a valve that leaks lesser then a valve whit original seat.