Operators and Internet service providers invest in broadband to be able to deliver new services that require higher data transmission rate. A way to make this possible is to use ADSL, Asymmetric Digital Subscriber Line, as the access technology. To be able to handle this technology, the service providers should do a pre-qualification. Methods and tools are needed to analyze the local copper lines and decide if these qualify for ADSL with respect to service availability and possible bandwidth through the lines. This report brings up some methods for pre-qualification of ADSL, the important quality parameters and how to gather them from the available services today.

Leaders have many tools in their toolbox when it comes to managing their firms, assuring that they are moving in the right direction. One of these tools is vision. Vision can be a powerful tool for steering a company. But to be able to use it fully, you must also understand how vision is best conveyed to employees and followers. If you understand the vision as a tool, you can fully utilize it.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

There is a strong debate in the media about the CEO compensation in the listed companies and whether they deserve their high rewards. Many previous studies have shown differences in the reward system depending on the ownership structure, mostly testing for only ownership concentration or ownership category. This study aims to investigate how the influence of the owners affects the CEO reward system, testing for both the level and the structure of the reward. The sample used in the investigation is Swedish listed corporations and consists of 251 observations. A survey was also conducted but due to low response rate and because the answers are not representative for the whole sample the survey will only be used as an illustration.

This study is preformed at Westbaltic Components placed in Töcksfors Sweden. Themain target in this study is to make one of the company?s assembly lines better andmore effective. The assembly line constructs vending machines for different stores allover Europe.It will contain tobacco, snuff, cigarettes and shaving blades and many more similarproducts.The first step in our study is to locate the daily problems and find out a good way toreduce them and make them disappear. A good way to do this job easier was toconstruct a visualizing board.

ABSTRACTBackground: On behalf of the Orthopedic clinic, Västerås, a study has been conducted with focus on comparing the results after conservative and surgical treatment due to complete achillestendon rupture.Aim: To compare results when testing the active and passive range of motion, calf muscle endurance, estimation of pain related to the achillestendon and self-efficacy to be physically active for individuals who have undergone conservative or surgical treatment after complete achillestendon rupture.Method: 14 individuals afflicted by complete achillestendon rupture in 2010 were recruited as a purposive sample. Examination were conducted of: Ankle range of motion with a goniometer, calf muscle endurance through a toe-raise test, estimation of pain intensity related to the achillestendon by VAS and self-efficacy to be physically active through ?Exercise self-efficacy scale?. P-value and the median were calculated.Result: The results of ankle range of motion and calf muscle endurance were based on the difference between the injured and the healthy side. When testing active plantarflexion the conservative group had a median of 4 ? and the surgical group had a median of 10 ?.

In this study the reliability of dominance profiles as a method of establishing a person's learning style was tested. Eight students at Malmö Academy of Music tried three different ways to learn a short melody at the piano. In this way, their preferred way of learning things (either visual, auditive or kinestetic) was established. Five of the students did best when they used a visual cue to learn a melody, and the remaining three did best when auditive cues were used. All but one of the students had the worst result in the kinestetic trial.

To increase the quality in their products ABB is working towards a cleared order concept. That means that all customer specified options are to be known before they start with order calculations and construction. As it is today they use paper checklists to achieve this. One order may have several reactors, and for a reactor there can be several different alternatives. For each alternative a new checklist must be filled out.As of today all reading of the customer specification and checklist fill in with is done by hand by different persons, and sometimes the same data is read more than one time.

This master?s thesis investigates the contextualized relation between a reader and a text, in a non classroom-oriented situation. I am studying the questions of (a) in what way a persons education, personal experiences and opinions, and (b) how the text; its design (language) and message, holds a function in ? and forms ? the reader-text relation. At the same time I am testing the theoretical framework of Louise Rosenblatt, for the purpose of finding an adequate method to analyze this relation.

Goodwill accounting has for a long time been, and with the implementation of IFRS in 2005, has become an even bigger issue. Critics mean that reporting of goodwill impairments is subject to discretion that can be used by the managers. We have applied a study made by Carlin and Finch (2009) on Nasdaq OMX Stockholm during 2006-2012. Our study contains 50 of the 255 public companies at 2012-12-31. The purpose of the study is to investigate if companies use an opportunistic discount rate when testing for impairment in goodwill and if the relation between goodwill and net profit before taxes, goodwill intensity, is an incentive for opportunism.

In this study the reliability of dominance profiles as a method of establishing a person's learning style was tested. Eight students at Malmö Academy of Music tried three different ways to learn a short melody at the piano. In this way, their preferred way of learning things (either visual, auditive or kinestetic) was established. Five of the students did best when they used a visual cue to learn a melody, and the remaining three did best when auditive cues were used. All but one of the students had the worst result in the kinestetic trial.

Numerous studies have showed that Swedish municipalities are responsible for several of the activities that concern children and their rights, e.g. school and health care. Furthermore, the Convention of the Rights of the Child is an international agreement that Sweden has signed and ratified which also implies the obligations that Swedish municipalities have. The purpose of this study is to investigate and compare, from a social justice perspective, how children?s rights are being emphasized and how children?s opinions are being taken into consideration at the municipality level in Sweden.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

According to many scholars America's soft power is in decline, a power resource whose importance has been increasing in world politics. This makes it interesting to examine if there is a difference between how Democratic and Republican administrations wield their soft power.This thesis is a hypothesis-testing study and the purpose is to test the hypothesis that Democratic administrations, to a greater extent than Republican, can create, utilize and defend soft power. My thesis is based on Joseph Nye's theory of soft power and the focus of this study is the aspects of the foreign policy resources. In order to measure this concept I have made my own operationalization where five different indicators serve as my guidance. I use the method of least likely-cases to select and motivate the administrations being tested, which gives me a comparative study of the Democratic administrations of Lyndon Johnson and Bill Clinton and the Republican administration of George H.

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.