This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).

In view of the difficulty of recruiting staff to care profession and in terms of the increasing need to find ways of ensuring a good language level in the profession, have an interest in language tests been revealed. The purpose of this paper is therefore to highlight the use of language tests for admission to the care courses for adults in Värmland. What provided This is a survey of the prevalence and an examination of the validity of the test. The issue that this study assumed is: How is language test in connection with admission to the certified health and social care courses for adults in Värmland? How well correlates intent of the use of the language test with the test's validity and reliability?The methods used to seek answers to these questions has been a combination of questionnaires and experiments.

This bachelor thesis discus how store managers at Clas Ohlson motivate their co-workers at their everyday work.Motivation at work is essential, since engaging co-works makes the everyday routine work more effective. Otherwise that type of work can easily lead to unhappiness at the workplace which leads to less motivated workers, poor performance, even less motivated workers and this will start a negative circle.Other studies has shown that to in order to be pleased at a workplace and to keep qualified co-workers, the leaders needs to have knowledge in how they can use different techniques to increase staff motivation, but still motivation is not considered being an economic means of control. This has made me think about how leaders can motivate their workers at their everyday work.The questions at issue are:o How can leaders motivate co-workers in everyday work,o Which preferences the leaders consider control the individual motivation ando Which methods they can use to increase the motivation in the routine work.The purpose with this thesis is to study how leaders use their leadership to motivate workers to perform everyday work with more enthusiasm. To answer the question I have interviewed store managers at Clas Ohlson.In this thesis I have used a qualitative method, and I have compared relevant theories with the interviews I have done. Thus primary data has been gained through one-to-one interviews but also through mail interviews.

Thiswork is about the parents ' perception of their children's schooling and schoolsituation. It also addresses the important and fundamental conditions when itcomes to parenting and caring of children, which is an essential andcontributory basis for children's school situation. The work also deals withthe importance of good cooperation between school and home for the children tocome to the school grounds and with the desire to learn and develop. The aim ofthis work is that through a survey get a picture of how parents feel abouttheir child's school situation. But also look at how important interplaybetween school, parents and children to the school situation to be good.

Introduction: Public health researchers have long been focusing on investigating health inpopulations through determinants such as income inequalities. Nevertheless, incomeinequalities can be considered an effect of the organization of welfare regimes. The publichealth status is largely affected by the organization of welfare regimes and consequently thereare large differences in health within and between welfare regimes. How are these differencesdistributed and how can they be explained?Aim: To compare health between welfare state regimes with the use of Esping-Andersen?swelfare regime typology and to investigate the relationship between welfare statedeterminants and health.Methods: A literary review based on 12 scientific articles.

The main purpose of the project was to identify potential environmentally harmful substances which can be leached from rubber asphalt. A method for analysing asphalt was developed and three rubber asphalt materials were analysed after being cryogrinded. One of the materials was also tested in a road machine made for testing of asphalt paving. The particles created in the machine were analysed in the same manner as the cryogrinded asphalt materials.The asphalt materials were leached by water during 24 hours. The leachates were extracted with dichloromethane, dried with sodium sulphate and concentrated to a small volume.

This is the end report of my final exam at Medieteknik. It covers the planning, work process and review of a Flash based web application that I set out to do. The goal was to create a user friendly, interactive e-shop with embedded functionality for playing music, displaying rich media content and researching possible payment solutions, to enable buying music files online. The project involved creating the user interface, the programmatic functionality of a Flash client (an SWF file). Also, setting up an Apache HTTP Server and establishing a working ?bridge? between the Flash client and the web server with Flash Remoting components and AMFPHP.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

On 1 January 2005, IFRS (International Financial Reporting Standards)was mandatory for all listed companies within the European Union. The introduction is to create a transparent and consistent reporting. Mainly to provide companies, investors and financiers the same access to world capital markets. Since the introduction of IFRS, the goodwill value is determined by annual impairment tests. If an impairment of goodwill is a fact the goodwill decreases in value.

The aims of the study were to investigate the prevalence and antibiotic resistance of Campylobacter jejuni and Campylobacter coli in chicken and chicken products, and to investigate farmer awareness of antibiotic resistance development. The study was conducted in the Can Tho province in Vietnam during six weeks in October to November 2008. Ninety-six samples from raw chickens were collected from twelve market places and analysed for the presence of Campylobacter. A total of 96 cloacal swabs from 20 farms were obtained and analysed for the presence of Campylobacter. Farmers were asked to answer eight questions concerning the housing of the chickens, modes of handling sick animals as well as use and knowledge of antibiotics and resistance development to antibiotics.

Linux is a growing operating system in embedded systems. Today, Linux is not only in heavy servers but also in cell phones, PDAs, cameras and other devices running on battery power. While current technology is more energy efficient, more and more technologies are implemented into a single unit resulting in an overall increase of power consumption.Low power consumption is an increasingly important feature of a system today. Lower power consumption means lower costs, less environmental impact, and longer life for applications that runs on batteries.This work compiles methods to reduce power consumption of Linux systems. The work includes examining whether the available opportunities are platform-specific or of a more general nature.

Background: Phonemically balanced word lists are used when obtaining speech recognition scores in noise. These lists are designed for adults, but are still used for children. To properly obtain speech recognition scores in noise for children, normative data is needed to show what differences there are to be expected between children of different ages. Purpose: The main purpose is to obtain normative data for children in the ages of 7, 10 and 13 years for speech recognition scores in noise using words and to compare these with each other and with normative data of adults. A further purpose is to examine if there is any practice- or exhaustion effect to be seen when obtaining speech recognition scores in noise for children in the ages of 7, 10 and 13 years.Material: The participants were ten 7-year-olds, ten 10-year-olds and ten 13-year-olds.

Library and information science (LIS), being a research area characterized by theoretical discord and definition disarray, provides an interesting field of inquiry. Its content, boundaries, scope and superior identity are not clearly stated. This Master s thesis focuses on a thus far unexplored perspective on the discipline: a conceivable statistic and causes- and- effect relationship between the LIS students appreciated identification with the superior identity of the discipline, and the chosen vocational direction within the field. This relationship is examined through testing a working hypothesis on the results of a major quantitative questionnaire survey. The theory behind our research derives mainly from Thomas Kuhn and Richard Whitley.

Close to the city center of Reykjavik lies the combined national- and university library of Iceland. Usually, these two types of institutions are separated. The purpose of this essay is to investigate how the library in fact selects the new digital material to offer the users in Iceland, and if the combined mission creates any problems or conflicts.The investigation examines the planning and the content of the digital library, what user groups are addressed and how the organisation is held together despite the different missions. If cultural context in Iceland makes a difference for what is selected and offered to the users is also discussed.Six informants in strategic library positions dealing with the digital national- or university library, were interviewed. The answers have been analysed in light of the library&information literature on building and maintaining digital library collections and organizational and marketing theory.The main result of the study is that the informants do not see a conflict between the missions of the organisation, although traces of a struggle were found in some areas.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.