ABSTRACTBackground: Most cases of lumbar disc herniation are asymptomatic. When symptomatic, LDH may cause a significant physical and mental distress. Initially, most patients are treated conservative but sometimes operations may be required.Aim: The aim of this study was to provide a review of the scientific basis of physiotherapy, including behavioural therapy, as a treatment to lumbar disc herniation regarding pain, function and the size of disc herniation in people suffering from lumbar disc herniation.Method: Four databases were used in the searches of literature. Assessment of the validity of the studies was done with the PEDro-scale and valuation of evidence rate was made according to guidelines made by the Swedish Council on Health Technology Assessment (SBU).Result: Nine RCT-studies were included with a total of 713 participants. The scientific basis is moderate to support a pain reduction and limited regarding improvement of physical function when it comes to physical exercises, including MDT.

In 1996 a hunting test for British gun dogs was started in Sweden, based on a similar one al-ready in place in Norway. The aim of the new test was to describe the hunting ability of the dog and to use the results as a basis for selection. However, up to now, no genetic study of these data has been done. Therefore the aim of this study was to estimate genetic parameters for the traits measured in the hunting test and to investigate whether the traits can summarized into fewer overall measures. Data from trails of British gundogs between 1996 and 2005 in Sweden were used to estimate genetic parameters and environmental effects in hunting performance. British gundogs consist of five different breeds: Pointer, English setter (ES), Gordon setter (GS), Irish red setter (Irl S) and Irish red and white setter.

ABSTRACTTitle: The exact title used in the thesis will be mentioned here.Level: Bachelor thesis in BusinessAuthor: Mattias Lindqvist & Jonas TesfaySupervisor: Peter LindbergDate: 2011 ? JuneAim: In Sweden the representation of women on company boards is discussed extensively. It has also been suggested that regulations such as quotas should be imposed, in hopes of getting the gender balance on the board of directors. Measures such as these have been presented when this problem attacks our democratic values about how a society should look like. The aim is to study and analyze whether there is any connection between the return on assets and the proportion of women on company boards.Method: The paper is made from a quantitative with a deductive approach.

Enligt Socialstyrelsens föreskrifter om ledningssystem för kvalitet och patientsäkerhet i hälso- och sjukvården, SOSFS 2005:12, krävs det av vårdgivaren att denne arbetar efter mål. Att formulera mål inom hälso- och sjukvården kräver eftertanke. Målen måste vara mätbara och inkludera flera olika delar av verksamheten. Varje förbättringsprojekt är unikt och bör relateras till de resurser som avsatts. Ett stort problem vid kontinuerlig uppföljning är att välja ut parametrar som ger tillräcklig information och är lätta att skapa.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

This report focuses on the upper slit. The upper slit is located between the impeller andthe drive unit. The slit design depends on pump type and application. However it isuncertain why the design varies, The purpose of this report is to clarify why the designvaries and to recommend an improved slit design.A research has been done; information was gathered from interviews, but also fromsearching of databases and studies of drawings, reports and documents. The originalpurpose of the slit was to prevent twining around the driveshaft, and prevent dirt fromentering the cooling system.

ABSTRACT Tobacco Rattle Virus (TRV) is a soilborne plant virus. It is an important pathogen in potatoes where it causes spraing disease. This disease can lead to significant economical loss for the farmer, so it is imperative to get the proper diagnose before planting. TRV is spread naturally by free-living nematodes (Trichodorus and Paratrichodorus). Transference of TRV to a plant occurs when the virus-carrying nematodes feed on plant roots. The relationship between virus, nematodes and plants is complicated, and has to these days not been fully characterized. The diagnostic methods available today do not work sufficiently.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.

Introduction: The health for individuals with intellectual disabilities is asubject that is prioritized by the Swedish Institute for Public Health. Socialsupport has been proven to be important for health and quality of life. Despitethis fact there is no research available regarding the influence social support hason health and quality of life for people with intellectual disabilities in Sweden.Aim: To describe social support and the consequence of social support forhealth and quality of life for individuals with intellectual disabilities. Method:A litterature review of research in a defined area with a descriptive design.Systematic searches for articles were done in several databases and ultimately16 articles were chosen. Themes and categories were created with respect to theaim of this study during the analysis of the articles.

This thesis includes a description of the project flow for our projects at Semcon. The emphasis is on designing a manual for elMaster Concept.The project flow provides several minor and major elements plotting schedules for this project and the establishment of a manual. When a schedule is drawn, lists and tables with components and connections can be created. This is done to better manage drawings and make changes. These diagrams and tables are used in product manufacturing, testings, controls.

This joint study has researched the use of non-European history in a Swedish textbook for the High School course History 1a1 as well as internet based material regarding the same issue. The aim of this study was to clarify the use of non-European history in regards to the Eurocentric theory.As for the textbook analysis the purpose was to research what non-European history was mentioned in the material with regards to geographical location and the events that were mentioned, as well as to study how much non-European history was included in the material compared to European or Western history.The study of internet based material aimed to show what kind of teaching material could be found on internet based databases by and for teachers. The study aimed to show how well the material handled non-European history, as well as to what degree the material used European perspectives when dealing with non-European events and geographical areas.In our thesis we have created our own definition of the theory regarding eurocentrism. The method used was a combination of a quantitative and a qualitative discourse analysis of the texts.Our results showed that the textbook was overwhelmingly Eurocentric, not only giving vastly more focus to the European parts of world history, but also using European perspectives and ideals to describe non-European events and areas. The internet based material, on the other hand, proved more diverse and less biased, but also more difficult to find and less plentiful.Our conclusion, then, is that teachers have to choose between the risk of letting their students develop a severely limited and heavily Eurocentric view of the world, and the additional workload required to find and organize non-textbook material to broaden their students horizons.We hope our study will contribute to the discussion of the place of Eurocentrism in today?s global and multicultural society..

The project team has chosen to carry out the project itself. This is to be able to work more flexibly in the product development process and not be guided by some guidelines.Every day, we read in the media about a new truck burglary. The problem has become so common that we do not even notice it in the media. Each year the theft of 1 billion of Sweden and the entire 82 billion in Europe in 2008. This is an increase of 10 billion by 2007.

This master thesis was carried out at Scania in Södertälje, Sweden. It investigates the possibility of changing a connector interface that is used when there is a need for splicing the wheel speed sensor and thereby determine the consequences.The problems that exist with the current connector interface occur during assembly, as more time is required to complete a connection in a reliable manner. A complete connection requires joining the male and female connector, insert the connection into a protective retainer and then strap a cable tie on each end of the retainer. This process makes it more time consuming and it requires 20-30 seconds to complete the connection. Solving this problem would save time and enable easier assembly, therefore resulting in economical benefits.This thesis was accomplished through discussions with different sections at Scania, studying available documentations, observations during assembly, writing a requirement specification and contacting suppliers.The aforementioned methods resulted in four connector suggestions, the DT and DTMH connector from Deutsch, MCON connector from TE connectivity and MLK connector from Kostal, each of them compliant with the set demands of the surrounding environment.

This master's theses was carried out on assignment from Stockholm Vatten AB as a part of a project developing new waste water treatment techniques. The goal of the theisis has been to evaluate an anaerobic membrane bioreactor for treatment of waste water from Hammarby Sjöstad. The bioreactor has not been heated and the main interest has been to study the gas production, power consumption and the reduction of organic matter and nutrients.The system has been completed with a reverse osmosis unit and a total of four batch runs have been made with good results. The use of reverse osmosis allows nutrient in the waste water to be reintroduced into circulation as the reverse osmosis concentrate can be used as crop nutrient.The membrane unit is of VSEP ("Vibratory Shear Enhanced Processing") type and an extensive membrane test has been conducted. This so called L-test helped determine the most suitable type of membrane for the system to allow a higher ±ux and thus lower power consumption.

This report is about how HDR (HighDynamicRange) can be created and used in combination with Tone mapping. This work has been carried out together with Kapsch TrafficCom AB in Jönköping.The objective of this project is to:Evaluate and investigate the effects given to pictures by HDR and tone mapping.Evaluate if the technology may lead to improvements in Kapsch?s systems.To construct a program which is able to handle some form of tone mapping or HDR-algorithm.These questions will be answered in this report:What kind of effects has HDR and tone mapping-algorithms on pictures?Can the HDR-technology give better data in Kapsch?s systems?The research method used in this report is called action research. This means the authors has investigated the technology by reading different documentations and by testing different algorithms to see what kind of result they give. The report describes some of the tests made to see if the technology is appropriate in Kapsch?s system.There is two smaller reports made by the authors which documenting some of the work.The first report describes the work with different settings for a camera to create pictures with HDR-quality.