Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

This paper investigates the usability of the intelligence test Wechsler Nonverbal Scale of Ability (WNV). Twenty four children in two different age-groups were tested with WNV, 10 children between ages 5 - 6, and 14 children between ages 9 - 10. The WNV turned out to be a useful test when some verbal communication was used in the test situation. This was especially apparent among the younger children, who needed extra verbal instructions and verbal support through the different subtests. The test also contained standardized verbal instructions for all ages.

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a Test method called TMap (Test Management approach) that can be used for structured testing of information systems.

Many buildings are now nearing the end of their service life. This applies to both the older houses from the 40's and 50's to the million project houses that did not prove to be as sustainable in the long run. Often there is a desire to extend the service lifetime, but to do that you need to make detailed inspections. The Folkets hus in Gävle is one of those buildings that is in need of renovation and to fulfill the new requirements that must be met in today's buildings. It is desired to make the buildings rentable space more attractive and to extend the building with two more floors.

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a Test method called TMap (Test Management approach) that can be used for structured testing of information systems.

A personality test is a useful tool in recruitment contexts. Studies have shown that participants distort their answers in a socially desirable manner. The purpose of this study was to investigate if people respond more or less socially desirable depending on how they rate themselves in a personality test, based on the "big five" personality dimensions.Eighty people, (40 women and 40 men), 19-42 years, (M= 24,1 SD= 3,76) rated themselves on a personality test. Group one, (20 women and 20 men) completed the test on paper. Group two, (20 women and 20 men) completed the test verbally.

The aim of this essay is to investigate which of the goals in the syllabus, and with that what knowledge of Swedish, four students taking the SFI (Swedish for Immigrants) level 3 course believed themselves to have attained and to compare their self-assessments with their results on the National Test of Swedish for adult immigrants.The method used for the investigation is the individual interview. In addition to taking the National Test, the participants in the investigation were asked to mark the goals they believe themselves to have attained.The results show that the informants who best demonstrated awareness of their own knowledge are able to talk freely about their knowledge and difficulties, and when they mark the goals they believe they have attained, these correspond, on the whole, to how they responded in the interviews.One of the informants finds it more difficult than the others to assess her knowledge. A comparison between her experiences and the National Test results revealed several inconsistencies. For example, she claims that she can communicate in Swedish, but still she didn?t pass the test..

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

This thesis focuses on the testing activities at the stages of development and change regardingintegration brokers. The study aimed to examine the overall challenges that exist regarding thetesting activities within this context, and the thoughts towards the development method testdrivendevelopment (TDD). TDD emphasizes high level of test coverage and where the testprocess is well integrated with the development process. To seek answers to our question weapplied qualitative interviews with companies and respondents to try to understand the globalchallenges that are related to this work and processes. The main conclusions presented in thisstudy is that the overall challenges are involving and educating project participants in the testingprocess activities and the contributory effect test have on the end product.

The thesis tries to answer how a combination of financial metrics and marketing metrics can improve strategic decision making. The purpose is to develop a strategic working method for general dealers. The method is based on the two theoretical frameworks "The strategic resource model" and "The importance-performance matrix". The suggested method is being tested in a small retail store environment on the Swedish market. The result of the test shows that a better suited strategy can be developed when this strategic method, which combines financial metrics with marketing metrics, is being used.

The purpose of this thesis is to examine the usability of the Umeå University library catalogue Album. The aim is to evaluate the catalogue in order to establish if there are any problems that could be solved by modifying the catalogue. The following questions are answered: How should a good catalogue be designed? Which problems are common when using a library catalogue? Is Album user friendly? Are there any problems that occur when using Album and how can the catalogue be changed to avoid the problems? To answer these questions I have performed a usability test in which five persons, all students, got to carry out twenty tasks in the catalogue and talk about what they were doing and thinking while doing the test. This method is a usability method called Think Aloud.

This is a study of the national test in 3rd grade. The national test is obligatory and is conducted in 5th and 9th grade, but since the spring of 2009 the tests also become mandatory in 3rd grade. The case study of this research is to find out how children in 3rd grade perceive the purpose of the national test. The survey should also clarify how students think and feel about the national test, and how they feel before the national test and after they have finished writing the test. Has the test positive or negative influence on children? The survey will also show how much teachers clarify what the significance of the national test is for the students.

Preservation of cells and tissues by freezing at temperatures below 70°C has led to new possibilities for the storage of germ cells for fertility preservation. During the freezing process problems might occur, the greatest being ice crystallization which can cause membrane destruction and thus cell death. To minimize this risk, solutions that reduce the freezing point can be added to reduce crystallization and increase survival rates. These solutions are called cryoprotectants. The best method for freezing is still not known.The aim of this study was to analyze the effect of various parameters on the survival rate of human semen frozen with liquid nitrogen.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new Test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).