The purpose of this study is to focus on library service for children in a hospital, which in turn is seen in relation to a traditional children s library. Four aspects of library work were investigated. These aspects were working methods, partners of co-operation for the libraries, media policy (acquisition, use of the collection and circulation procedures), as well as programme activities for children.The research method was qualitative and comparative in nature, consisting of case studies of two libraries : (1) the library in a children s hospital, known as Bokskogen at Astrid Lindgren s children s hospital in Stockholm and (2) a traditional children s library, the children s department at Eslövs city library. In each library interviews were conducted. The investigation shows that the librarians in the hospital library must be more outreaching and active in order to stimulate children to use library materials.

Syfte: Syftet med detta examensarbete är att kartlägga förkunskaperna i områdena fotosyntes, biologisk mångfald, växthusgaser, energi och hållbar utveckling, samt evolution och naturligt urval hos gymnasieelever som läser ämnet Biologi 1 på det naturvetenskapliga programmet på en gymnasieskola i västra Götaland. Syftet är också att utvärdera betydelsen av diagnostiska test för dessa elever och deras lärare. Avsikten är även att presentera möjliga förslag till att utnyttja resultaten av dessa test för att på bästa sätt kunna hjälpa de elever som har svårigheter i eller ligger i riskzonen för att ha svårigheter i dessa kunskapsområden i Biologi. Metod och genomförande: Undersökningen har dels genomförts med en diagnostisk test, dels genom intervjuer av tre lärare på gymnasieskolan. Eleverna har även fått två analysfrågor som berörde deras uppfattningar om användandet av denna test inom ämnet Biologi. Resultat: Resultatet visar att eleverna har bristande förkunskaper inom områdena fotosyntes och betydelse av växthusgaser. Både elever och intervjuade lärare är positivt inställda till diagnostisk test i Biologi.

The field of veterinary nursing should be based upon research and proven experience. Few studies have been performed within the area of distal limb bandages. Therefore the aim of this study was to examine and describe how to place a distal fore limb bandage based on proven experience. Data material was collected through four interviews with professional veterinary nurses, and then analyzed using a qualitative content analysis. In the analysis data material was transcribed and then divided into meaningful units that responded to the aim. The meaningful units were then condensed.

The aim of this thesis was to investigate the possibility of integrating an item tracking systemwith a monitoring system currently under development at Fifth Generation Technologies (P) Ltd.A literature study of RFID technology and the networks ZigBee and MiWi was done. Based onthe literature study a concept for a distributed system was developed.The concept is to have several RFID readers placed in the area where tracking is to be performedand allow them to communicate with each other through wireless communication. The RFIDreaders shall be able to form zones and filter the data that is forwarded from the zones to theservers and thus perform some of the work that the server would normally have to do. Theconcept has been evaluated by prototype development and testing. The prototype uses an ultrahigh frequency RFID reader and a MiWi network.The test indicated some limitations with the selected technologies.

This thesis describes the work process and the results for the development of a newkind of ergonomic cleaning mop, ranging from basic concept to a virtually productionready digital prototype. The project was made in cooperation with, Ömer Altun, whowas also the project supervisor, and whose plan it is to launch this new product onthe market in a foreseeable future. The mop is meant to be used by both professionalcleaning staff and ordinary home users. What makes this product unique is that it hasa movable center piece that simplifies the cleaning under low furniture.The work began with the establishment of a product requirements specification andlater a study of similar products and existing functional models was conducted. Afterthese surveys the work began with refining the existing concepts in order to makethem more complete.

Sandvik AB är en högteknologisk verkstadskoncern som omfattar affärsområdena Tooling, Mining and Construction och Materials Technology (SMT). Sandvik Materials Technology är världsledande inom rostfria och höglegerade stål, specialmetaller, motståndsmaterial samt processystem. Inom SMT drivs ett inköps- och råvaruoptimeringsprojekt (IRO) som har målet att minska lagernivåerna av köpskrot och legeringar i råvarulagret på skrotgården. Kapitalbindningen anses i dagsläget vara för hög. Därför är det viktigt att ta reda på hur det interna flödet av returstål ser ut, för att på det sättet kunna förbättra lagerstyrningen.

Syfte: Studiens syfte var att reliabilitetspröva stabiliteten för M-SES för patienter med långvarig smärta genom test-retest metoden. Syftet var även att undersöka samtidig validitet för M-SES, genom att utföra M-SES och SES mätt vid samma tillfälle.Metod: I studien undersöktes self-efficacy instrumentet M-SES på Uppsala Akademiska sjukhus, på avdelningarna för Smärtcentrum och Smärtrehabilitering. Frågeställningarna berörde vilken stabilitets reliabilitet mätt med test-retest som förelåg hos M-SES, samt vilken grad av samtidig validitet som förelåg för M-SES korrelerat med SES. Den slutliga undersökningsgruppen bestod i frågeställningen om stabilitets reliabilitet av 29 patienter (23 kvinnor, sex män), och i frågeställning om samtidig validitet av 22 patienter (17 kvinnor, fem män).Resultat: Vid prövning av stabilitets reliabilitet för M-SES visade resultatet en stark korrelation, med korrelationskoefficient 0,92 och p<0,05. Det förelåg även en god överrensstämmelse för test-retest undersökningen.

The purpose of this thesis is to examine the usability of the Umeå University library catalogue Album. The aim is to evaluate the catalogue in order to establish if there are any problems that could be solved by modifying the catalogue. The following questions are answered: How should a good catalogue be designed? Which problems are common when using a library catalogue? Is Album user friendly? Are there any problems that occur when using Album and how can the catalogue be changed to avoid the problems? To answer these questions I have performed a usability test in which five persons, all students, got to carry out twenty tasks in the catalogue and talk about what they were doing and thinking while doing the test. This method is a usability method called Think Aloud.

The purpose of this study is to find out how libraries can be user-friendly to people with dyslexia by focusing on how adult dyslectics experience the library. Data were collected through literature and interviews with adult dyslectic students. Two different types of user studies served as a theoretical framework; one was an individual-related study by professor Wilson and the other was a system-related one from professor Buckland. The findings in this study shows that dyslectic library users often experience difficulties when seeking for materials in the library, due to the libraries organisation of material according to the written language. Through technical aid and a more user-friendly organisation of materials it may be easier to find relevant material for dyslectics.

One of the most common ways to produce heat and electricity in Europe today is by the incineration of waste or combustion of coal. These materials can be very sulfurous and during combustion sulfur dioxide is produced. This is an environmental and health related toxic substance which is why power plants have strict regulations on removing it from the flue gas. Sulfur dioxide is removed from the flue gas by adding a limestone reagent. The sulfur dioxide reacts with the limestone and the synthetic product obtained is ?Flue Gas Desulfurization gypsum?.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

SAMMANFATTNING Läkemedelsresistens är ett växande globalt problem. Inte minst bland parasiter hos våra djur har rapporter om utebliven effekt av läkemedel ökat. Pålitliga detektionsmetoder av anthelmintikaresistens hos nematoder är viktig så att åtgärder sätts in i ett tidigt skede för att djurvälfärd och produktion ej försämras. Detta kräver standardiserade och beprövade detektionsmetoder. De metoder som används idag för flertalet nematoder är ursprungligen framtagna och anpassade för strongylider hos får.

Technology evolves quickly, with innovative ideas growing everywhere. Still, no technology is anywhere near challenging the mouse and keyboard for navigation of your standard computer. This study focuses on comparing the traditional technologies of mouse and keyboard with the new technology of gestures - in this case Leap Motion - in purpose of finding how the usage differs and what the potential users want from the competing technology. The experiment was executed in a controlled environment, with as few external factors as possible. We found that although the test subjects found Leap Motion fun, the test subjects do not want to surf the web with gestures.

This study aims to examine the views on digitization of eight respondents, all working at different libraryinstitutions in Sweden, and how their views are reflected in their library's digitization strategies. The poll wasconducted on the basis of Ingrid Mason's theory of information standards, their structure and sociopoliticalnature. The informantion standards are divided into three aspects, curatorial, semantic and technical, and theyaffect selection of, intellectual and physical access to the digitized material, which in the end is what constitutes the digital cultural heritage.The background to the study is that the Swedish library institutions in the current situation lacks a nationalstandard or a common strategy for the digitization of cultural heritage, while it is still implemented digitizationprojects at many library institutions. The method used is qualitative, structured interviews with open-ended questions.The study shows that one of the main motives behind the libraries' digitization projects is to make librarymaterials available in a new way, creating greater opportunities for the users to take advantage of the material.The library users are the ones who mainly control what is digitized, although aspects of preservation ismentioned. Furthermore, it appears that the respondents believe that digitization offers improved capabilities tosearch and learn more about the collections, but the actual work of image capture, the addition of metadata,presentation to users and long-term preservation is very complex.Views on what it is to be digitized, how the material should be selected and provided with metadata and howit should be presented to users is what creates the standards that libraries use when they digitize their materials,and digitization of library materials creates new conditions for new users to access and use library material.This is a two years master?s thesis in Archive, Library and Museum studies..

ÅF Test Center in Borlänge had a need to expand their capacity for compressive and tensile strength tests. They wanted to do this by using a hydraulic cylinder, which they already possessed, to apply the force with. This required a load receiving structure. The aim of this work was to design and dimensioning a test bench for a cylinder marked NIKE 300 tons. The work would result in a completed design proposal on a test bench which could manage to run the compressive and tensile strength tests of up to 3000 kN.