Syftet med detta examensarbete var att utveckla en utrustning för test av larmsystem uppbyggda med CareTech?s Smart Call-produkter. Testutrustningen ska kunna upptäcka problem i kommunikationen mellan dessa enheter. Den ska också kunna mäta matningsspänningen till enheterna under en viss tid och visa om spänningen har varit lägre eller högre än tillåtna värden..

The report presents a thesis carried out on behalf of the company SAAB Training and Simulation which is situated in Huskvarna. The authors of this report are going to graduate as mechanical engineers focusing on product development and design, and this thesis should reflect the knowledge obtained during the education. The assignment, given from the company was to develop a concept of a stand that will constitute as a part of a mobile system for target practice. The reader get to follow throughout the project and can hopefully learn from the smart solutions and approaches that have arisen during the process.Today SAAB doesn?t have a mobile application in their portfolio that utilizes the benefits of their sensor measuring system, also called the LOMAH-bar.

Inom disciplinen kognitiv ho?rselvetenskap tilla?mpas en integrerad ansats da?r taluppfattning beskrivs ur ba?de ett auditivt bottom-up-perspektiv och ett kognitivt top-down-perspektiv. Studien underso?kte hur taluppfattning varierar med, respektive utan top-down-sto?d och vad de kognitiva fo?rma?gorna uppma?rksamhet, minne och inhiberingsfo?rma?ga hade fo?r inverkan. Taluppfattningsfo?rma?ga utva?rderades med hja?lp av ett Speech-In-Noise-test (SIN-test) som bestod av tre deltest da?r enstaviga ord presenterades i en ofo?rdelaktig miljo? besta?ende av ro?ster som talande i mun pa? varandra.

SammanfattningSyfte och frågeställningarSyftet med studien var att i ett test-retest utvärdera tillförlitligheten i den nyutvecklade kraftmätaren ISOP vad gäller isometrisk muskelkraft i handledens tre rörelseplan. Den frågeställning som låg till grund för studien var följande:Föreligger det någon signifikant skillnad i uppmätta värden vid upprepade mätningar av handledskraft vid två separata testtillfällen (s.k. ?test-retest?)?MetodEtt test-retest utfördes på 20 stycken testpersoner (tio kvinnor/tio män, ålder 28-48 år, medelvärde 38,6 år), utan tidigare hand- eller handledsskada. Åtta mätningar utfördes i sex olika handledsriktningar: flexion, extension, radialdeviation, ulnardeviation, pronation och supination av dominant hand samt flexion och extension av icke-dominant hand.

This paper replicates a test performed by Burgstahler and Dichev (1997), which identifies a kink in the frequency distribution of earnings for companies listed on American stock exchanges. Their claim, that the kink is evidence of earnings management, has however been dismissed as a methodical consequence. To address this concern, this paper not only replicates the test in general, but also performs tests on a split sample, where founding family-owned companies are separated from the others, since earlier research has shown that founding family ownership is correlated with less earnings management. The results are in line with the findings of Burgstahler and Dichev, with a significant kink in the frequency distribution in the general test. The findings also show that the significance of the kink increases in the non-family-owned sample, while it disappears in the family-owned sample.

The main topic of this thesis is to evaluate the impact on the usability of web pages when using responsive web design, a concept for developing web pages whose design adapts to the screen size being used. This is done by creating a responsive prototype based on an existing web site. A number of usability tests are conducted on the two versions of the site in order to compare the time to complete the tests and to observe the behaviour of the test participants. The tests are conducted on desktop as well as on mobile devices with varying screen size.The number of test participants was relatively low, and so the quantitative result is not statistically valid. However, the conclusion is that the most effective combination is to use either of the sites on desktop format.

This report is founded in lack of knowledge concerning the design and layout procedureduring a new engine room construction.The prime question is how the engine room takes its form from idea to construction and whathappens in between. We want to give the reader a better understanding in how the work isdone and why it is designed the way it is concerning layout, ergonomics and safety. Duringthis report we will enhance the knowledge concerning regulations and rules that are of greatsubstance such as SOLAS, Swedish Sjöfartsverket and IMO.By contacting the parties involved in the process in newly designing a vessel and its engineroom, we will assume their approaches and experiences. We will study the work progressfrom planning to construction of a vessels machinery spaces. We will with the help ofinterviews with interested parties get an idea of the approach and also compare the finishedproduct a bit depending on company size and resources.The investigation resulted in a good basis for how a ship engine room design takes shape andwhich aspects are taken into account, however, we found that the existing rules concerningengine room layout was very vague and was seen as the most recommendations.

The author has, with the help of AK Consultancy Indoor Air AB, formed a series of questions regarding moisture problems in buildings and how these are handled in extreme climates with high temperatures and a high relative humidity. Furthermore to analyse and indentify key material that makes a construction safe against moisture problems. Ventilation, AC and the choice of materials have in a later stage of the thesis been investigated to enhance the knowledge of moisture protection. The research for this report includes measurements on existing buildings, calculation models on the building envelope for analyses and the ingoing materials of the envelope. The health aspect of moisture problems related to ?sick building syndrome? has been included and interviews have been conducted to gather relevant information.A study of the American system, ASHRAE, American Society of Heating, Refrigeration and Air Conditioning Engineers and the standards used in Singapore has been made to highlight the difference.

This report addresses the growing need to adapt the medical healthcare to the new possibilities that can be accomplished by incorporating a web aspect to the personal treatment plans of patients. It describes what implementations that need to be considered in order to successfully convert to a partially web-based treatment.The report also reflects the potential economical gain that can be made by keeping the communication between the patient and the doctor frequent. It also takes into account the personal gain to the patient by increased feedback and easier ways to communicate with their attending physician and thereby increasing the quality of their healthcare and service.The construction of a prototype of the system required is also included in the report as a description of construction and functionality of the prototype along with results and estimated outcome..

Syfte och frågeställningar: Syftet i den här studien har varit att undersöka hur fysiologiska och upplevelsebaserade variabler skiljer sig vid känd, okänd och oväntad arbetstid samt i förhållande till mentala färdigheter. För att uppnå syftet undersöktes följande frågor. Hur påverkas fysiologiska och upplevelsebaserade variabler vid känd, okänd och oväntad arbetstid? Vilket samband finns det mellan mentala färdigheter och de fysiologiska respektive upplevelsebaserade variablerna?Metod: Avsikten är att upprepa tidigare studier men med nya parametrar. Testpersonerna var uthållighetstränade (57,1 ml/kg/min ±3,7SD) män med en medelålder på 37 år (±3,8SD).

Balcony Art is an idea for a new kind of furniture group for those who have limited space on their balcony. This report will discuss conceptual and part of primary construction of the chair and table for use on balconies, how the products developed from an idea to primary, preliminary products.In the conceptual design part, the report will discuss how product requirements and specifications are developed and how these controls the design.In the primary construction, the report will discuss the products journey from sketch to functional CAD models and how the products of individual parts are designed and how the durability calculations affect the design..

Idrottsrörelsen är den största och mest livskraftiga folkrörelsen i Sverige. Prestationsförmågan och kraven har ökat inom idrotten och det pågår en ständig jakt efter nya talanger. Många, oavsett idrott, tränar väldigt mycket och på ett likartat sätt, men får sällan någon feedback på träningseffekten. Fysprofilen kan hjälpa till att optimera och styra träningen rätt genom att identifiera varje individs fysiska förmåga. Löp- och snabbhetskraven i lagsporter karaktäriseras mer av riktningsförändringar än av löpning rakt fram.

The smartphone is part of our daily life. Smartphone users type on a screen area that is no larger than the palm of a hand. To help with this endeavor the software known as AutoCorrect was created. However little is known about how AutoCorrect actually change the language and if AutoCorrect users at all perceive the impact it has. This study aims to find out if our test subjects are aware of AutoCorrect?s presence and how much it influences them.

Master thesis work at ITN (Department of Science and Technology) in the areas of A/D-construction and RF-circuit design. Major goal of project were to research suitable possibilities for implementations of direct conversion in transceivers operating in the 160MHz band, theoretic study followed by development of components in the construction environment Cadence. Suitable A/D- converter and other important parts were selected at the end of the theoretic study. Subsampling technique was applied to make A/D sample requirements more realistic to achieve. Besides lowering requirements on A/D-converter it allows a more simple construction, which saves more components than subsampling adds.

How do we match our education with the needs of the construction line of business and the requirementsof the Swedish National Agency for education? Is there something that we have to change?In this study I have asked our former students about their opinion of our education and I have also asked them to give me their view on what a good teacher is like. I have been able to benefit a lot from their answers in my efforts to be that good teacher. This survey took place at Facebook.The answers showed that we carry on a piece of solid workmanship. But you can always improve, try harder.