This study investigated the possibility of implementing three standards, Transistion Minimized Differential Signaling (TMDS) and two versions of Stub Series Terminated Logic (SSTL), for inter-chip communication in a specific manufacturing process. The two SSTL standards were implemented in one transceiver system while TMDS was implemented in a separate system. The evaluation was done with Spice simulations on schematic level with some parasitic capacitance and resistance. The idea was to investigate the possibility of implementing these standards and get an idea of eventual shortcomings. In order to create models as a basis for evaluation, simulation environments with models for circuit board and packages were created and transmitters and receivers were designed.

Syftet med arbetet var att undersöka möjligheten för optimering av produktflödet. Företagets produkter transporteras på ett transportband till en gemensam process. Det nuvarande flödet till processen är inte optimerat vilket resulterar i att processen körs ineffektivt. Ackumulering av produkter innan processen ska därför undersökas som en lösning till problemet.Fyra olika ackumuleringsförslag har analyserats och jämförts: hängande bansystem, palleteringssystem, depalleteringssystem och kombination av bansystem och palleteringssystem.Förslagen har blivit bedömda och jämförda utifrån följande parametrar: yta, investeringskostnad, flexibilitet, arbetsbelastning, arbetsmiljö och tid. Hängande bansystem fick det högsta snittvärdet och valdes därför för fortsatt analys med stöd av simulering.

The objectives of this research were to determine whether the natural rattan resources in Sulawesi, Indonesia can cope with the strongly increased harvesting pressure that has occurred over the last centuries. I was furthermore looking for patterns in the rattan population dynamics that might give a hint on how the harvesting system could be improved to ensure a maximum sustainable yield. To answer these questions, I developed an individual-based model to analyse the dynamics of rattan growth in connection with rattan harvests by locals to identify sustainable levels of rattan harvests around villages in Sulawesi, Indonesia. Scenarios with different harvesting intensities were run to compare the change in harvest amount. For a given harvesting pressure, scenarios with a high number of harvesters and a low harvesting frequency had the same effect as scenarios with high harvesting frequencies and a low number of harvesters.

Forskning med hjälp av mikroskopi har med tiden ställt merspecialicerade krav på utrustning som används. Utrustningenhar blivit mer bättre men samtidigt också dyrare. Enhög kostnad innebär att avancerad mikroskopi inte kan användassom ett utbildningsverktyg inom grundutbildning.Dagens studenter tvingas på så sätt förberedas för framtidensforskning genom att använda gårdagens utrustning.I detta arbete visar vi hur virtuell mikroskopi kan användasför utbildning och forskning. Virtuell mikroskopi kananvändas som komplement, eller möjligtvis ersättning, förbefintlig undervisning. Vi har demonstrerat detta genomatt utveckla en pilotapplikation som simulerar de två metodernaFLIP och FRAP.

Mothers of small children often work part-time in Sweden. Since old age pensions are based on lifetime income, part-time work leads to lower pensions, as long as there is no compensation from non-actuarial benefits such as minimum pensions. In this paper, I investigate whether different components of the Swedish pension system provide incentives for part-time work among women. The analysis is performed through a simulation of future pensions for 9 typical women in a certain cohort. For three levels of education, I compare pensions of women with different labor market participation rates in different growth scenarios.

I denna uppsats behandlas hur klassningssällskapens regelverk kan bidra till ett örlogsfartygs överlevnad vid vapenverkan. Syftet är att undersöka om regelverken kan användas för att implementera stryktålighet genom sina notationer och krav på redundans, separation och skydd mot splitter.Arbetet inleds genom kunskapsuppbyggnad av teorier som behandlar örlogsfartygs överlevnad, vilka sedermera bildar arbetets teoriram. Sedan sker en analys av regelverken samt en fiktiv operativ miljö skapas för att ta fram taktiska uppgifter samt hot, vilka sedan omvandlas till verkansdelar och kritiska system. Därefter skapas modellerna som tillsammans med verkansdelarna används i simuleringen som genomförs i simuleringsverktyget Semiautomatsikt fartygs verktyg för AVAL. Simuleringarna mäter utslagssannolikheter av olika funktioner ombord vid påverkan från de framtagna verkansdelarna.

Along with rising energy prices and increasing awareness of environmental issues, the criteria for buildings energy performance have been sharpened through the years. Today, ?passive house? and ?low energy house? are commonly used phrases in the construction industry and is expected to become increasingly common in the future.For houses with well-insulated building envelope the importance of well constructed details increases when minimizing the heat losses. Examples of these details are floor-wall junction and window openings in the wall. In such connections thermal bridges occur, which means that heat more easily is transported out of the building, compared to the rest of the building envelope.This report deals with detail solutions around windows and a comparison between a traditional slab and a foundation from Koljern consisting of foam glass.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

The environmental monitoring in Sweden has been developed by several different parties and is now being coordinated and made more effective in order to meet the current demands on high quality information regarding the state of the environment. Sweden has been divided into five different water districts based on watershed areas because of requirements in the Water Directive of the EU. In Sweden there are two common types of environmental monitoring programs used to gather information on changes in time and in space. Currently both these two types are used for lakes in the water district of the western sea but only one is used for watersheds. The purpose of this report is to supply basic information regarding the possible need for a second environmental monitoring program for watersheds in order to better describe the spatial variation within the district as well as to determine the number of samples necessary in order to describe the district over time and space.

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

Bakgrund: I och med att Basel II har instiftats i Sverige så måste finansiella institutioner beräkna sin marknadsrisk på sina portföljer. Detta kan göras genom olika VaR metoder. Dessa ger dock olika uppskattningar på marknadsrisken. De finansiella instituten får använda sig av den metod som de anser reflektera marknadsrisken bäst. Det finns dock ingen metod som utsetts till standard.Syfte: Syftet med detta arbete är att jämföra olika VaR-metoders skattning av marknadsrisken utifrån verkligt utfall, för att urskilja vilken metod som är funktionsdugligast.Avgränsningar: Denna undersökning inkluderar fyra olika VaR metoder.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

One of the main tasks of the Swedish Armed Forces over the past few years has been International assignments, which increased the importance of the Lessons Learned process. Methods of simulator training with computers have become more frequent and the technical ability to collect digital data from sensors has been developed as well. This work demonstrates how the experience of Lessons Learned can be communicated with the computer simulator StriSimPC and how modern technology in future support experiences from the Lessons Learned process at the tactical level in the Army.Currently knowledge sharing consists of several processes and strategies in the Swedish Armed Forces. This is done by written reports, oral presentations and different practical exercises.This case study shows the functions of the simulator StriSimPC, methods of training and how it is used today. The study also describes the future opportunities, where digital metadata acquired from the modern combat vehicles could contribute sharing of experience in the Lessons Learned process.The summarized conclusions indicate that StriSimPC can combine the two strategies for personalization and codification of knowledge transfer to reach a higher level of learning.

Bakgrund: Kommunikation mellan personal inom hälso- och sjukvården är viktiga faktorer för att kunna garantera patienten säker vård. Sjuksköterskan ska ha kompetens att kunna fördela och koordinera uppgifter samt ha översikt av teamarbetet. Sjuksköterskan bör ha kunskap om säkerhetsarbete för att kunna garantera säker vård. Det finns ett uttryckt behov inom vården av relevanta och tidsenliga lag- och kommunikationsövningar, där teambaserade simulatorövningar framstår som en pedagogisk och tillförlitlig inlärningsmetod. Syfte: Att beskriva vad studenter vid ett lärosäte, som utbildar sig till specialistsjuksköterskor inom intensivvård, anser om teambaserad fullskalesimulatorträning.

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 kN along the x-axis, -0.25 kN along the y-axis and then 0.5 kN along the z-axis.