Sök:

Sökresultat:

1618 Uppsatser om Terrain transport distance - Sida 22 av 108

Förslitning av fräsverktyg

Sweden is dependent on secure sea transport. Shorter disruption of imports of fuel and crude oil can be managed with an emergency stock, but a prolonged halt in imports creates problems. For industry, the vulnerability is greater. Fragmented production chains in combination with expenditure reductions in inventory causes a dependency on proper transport of intermediate goods in the manufacturing industry. A lengthy disruption thus involves disruption of production for both domestic consumption and for export goods containing imported parts.In order to secure shipping routes with a limited number of vessels, Mine Counter Measures (MCM) capacity is required, and according to the Armed Forces, developed with new sensors and autonomous vehicles.

Koldioxidutsläpp vid sticklingsproduktion av pelargonium x hortorum i Kenya jämfört med Sverige :

Long transport of products is an environmental issue discussed to an increasing extent. The consumers are increasingly aware of how far our comestibles really have been transported. The increasing levels of environmental emissions are something that concerns people. The question is nevertheless delicate and many choose to ignore it. This is no longer an option.

Utveckling av mothållssystem till valsar

This Master Thesis is a product development project that has been carried out incooperation with Metso Paper Sundsvall AB. The task has been to develop a holdingsolution that generates force between two rolls and to evaluate the new solution withrespect to functionality, manufacturing, structural stability, costs, assembly etc. Theroll holding solution is a system that is part of a rollpress. The rollpress is used towash and dewater pulp. The existing solution creates forces that have to be absorbedby the gable of the press.

Värdet av tystnad : en värderingsstudie över Upplands Väsbybornas betalningsvilja för reducerat flygbuller

Since the spring 2003 the tenant-owner home association the Terrace in Upplands Väsby municipality lies straight under the approach route to Arlanda Airport?s new third landing chute. Noise levels of over 70 dB have been measured in the area, which exceeds National Board of Housing?s, values for traffic noise at a terrace in connection to housing. By using the method of hedonisk pricing the essay tries to find out if there exists a willingness to pay to reduce the noise in the area.

En studie i hur järnvägens möjligheter kan appliceras inom AB Volvo : med hänsyn tagen till företagets logistikkrav

In the year of 2011, the new CEO of AB Volvo announced a major reorganization. This reorganization was a contributing factor to the start-up of this thesis.Volvo Group Logistics Services (VGLS) is Volvo Group?s global logistics partner, which designs, manages and optimizes all of the group's incoming and outgoing logistics flows. With the reorganization, VGLS started a project regarding responsibilities around railway flows. Within the project a demand to collect logistics requirements occurred.

Brandrelaterade insekters lokala artrikedom i förhållande till olika miljövariabler : Fokus på betydelsen av konnektivitet på brandfält i boreal skog i Västerbottens län

The last century, forest fires have decreased in frequency due to efficient fire-suppression along with the growth of the industrial forestry. Since 1990, fire has been reintroduced under controlled forms to recreate burnt habitats. Many species that are dependent on, or benefits from, forest fires have increased since fire was reintroduced. The importance of connectivity is often addressed in ecological research. This is particularly important for species dependent on short-lived habitats such as burnt forests.

Didaktiska arter

The study intends to find easily recognizable indicator species for water quality in the constructed wetland of Flemingsbergsviken. The study is relevant since indicator species can be difficult to determine for common people. Easily recognizable indicator species could improve dialogue between the scientific community, administrative authorities and the general public. Such species could be used in education systems, associations or in information campaigns. Therefore, I have chosen to refer to these species as didactical species.

Gröna transportkorridorer

The economic development and competitiveness in Europe is heavily dependent on an efficient transport system. Movement of goods and people is essential for a competitive industry and successful trade. As a result of an intensified transport business, consumption of fossil fuels has increased dramatically. As a consequence, there are increased emissions of dangerous greenhouse gases. Transports are often mentioned as an area with high impact on the environment.

Klövviltets nyttjande av foderraps på viltåker och betespåverkan på angränsande skog

Today we have more game species than ever before in our landscape, both regarding number of species and number of individuals. The increasing number of wild species is an increase in game recourse for the countryside. The increase of game species, however, has negative effects on forests and agriculture land. The negative effects for forestry are damages on economic important trees, due to losses in production and quality. However there are ways to decrease the damage on valuable and important trees.

Ingenjörpluton : Kung på en sak eller klåpare på tusen?

This essay is about the engineer platoon. The engineer platoon has many different tasks and from my own experience sometimes too many. The platoon is able to build bridges, clear mines and to perform all kinds of construction work in rural or in urban terrain.In this case study I compare goals/demands for the battalion to goal?s set up for the company and finally what effects this has on the engineer platoons abilities. The main question is, if the engineer platoon really can solve all tasks given to them in the document TOEM? Abilities such as effect, protection and movement are the bearing parts of the case study.The materials I have analyzed are mostly from documents published by The Swedish Armed Forces.

Trygg i transport ? effekten av tid och upprepning på unghästars lastträning

Hästar transporteras över hela världen i syften som försäljning, tävling, träning och djursjukhusvistelse. I många fall, men kanske främst vid transport till djursjukhus, hinner aldrig den unga hästen få träna sig på att lastas innan den ska åka iväg någonstans. Den unga hästen utsätts för många obekanta och främmande situationer i samband med lastning, något som medför att den blir stressad. Den obehagskänsla eller stress som hästen upplever kan uttryckas på flera olika sätt, exempelvis beteendemässigt eller fysiologiskt. Det krävs därför att hästen lär sig vad transporten innebär och att det inte är något att vara rädd för, vilket kan innebära en svår uppgift för djurhållaren.

Establishment of play in Million program environments

Utgångspunkten för denna kandidatuppsats är att den byggda miljön påverkar våra liv och vårt handlingsutrymme. Den byggda miljön kan möjliggöra eller begränsa olika typer av aktiviteter. Leken är en av de mest grundläggande aktiviteterna i vår sociala utveckling och är en del av den sociala interaktionen med andra människor. Leken förknippas ofta med barn, men leken förkommer och är viktig för alla ålderskategorier. Syftet med studien är att ta reda på hur den byggda miljön kan skapa möjligheter för leken att etableras. Vi undersöker om man kan planera och styra leken och vad leken kan tillföra i ett miljonprogramsområde. Många av de miljonprogramsområden som byggdes i Sverige under 1960- och 70-talet är ofta problemtyngda och den byggda miljön lider av ett eftersatt underhåll.

Lämpliga områden för vindkraftsetablering på land i Norrbottens län

Wind power is becoming an increasingly important source of energy. There are several national and international goals set to increase to amount of renewable energy, and in order to meet these goals, the wind power production plays an important part and the establishment of new wind power farms are required. The Swedish national project Riksintresse Vindbruk has appointed areas in Sweden suitable for wind power, mainly when looking at the physical wind conditions of the area. In this study, I aim to define suitable areas for wind power establishment in Norrbottens län. In order to reach this goal, a critical regional method was developed and completed using GIS.

Effektivisering av 3D-processen inom anläggningsprojekt Förbättring av dataflödet från projektör till maskinstyrning

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

Modell för dimensionering av AGV-system inom tung industri

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.

<- Föregående sida 22 Nästa sida ->