Aim The aim of this study was to investigate the attitudes of midwives and gynaecologists at youth health clinics about their own thoughts of risks with unprotected oral sex and testing of orally contagious sexually transmitted infections (STI). The aim was also to investigate the level of knowledge of oral STIs. One further aim was to examine what they thought about the level of knowledge about oral STIs among adolescents and how common unprotected oral sex is within this group and if oral STIs/oral sex is brought up in the form of information or questions during STI-testing.Method Seventy-five youth health clinics all over Sweden were randomly chosen. A questionnaire was sent by mail to the clinics. It included questions about attitudes, knowledge about STIs and information exchange.

Ipendo Systems in Linköping, Sweden, is a small IT consulting firm developing among other things custom portal applications based on Microsoft Sharepoint 2010. The purpose of this thesis is to investigate whether the test tools TestComplete and LoadComplete provide sufficient compatibility for functional and non-functional testing of Ipendo Systems? Sharepoint based applications, as well as design testing related activities to be incorporated into their existing software development framework. A test process maturity framework was chosen and applied for the design of the testing activities, while the test tool investigation resulted in guidelines on how to apply the tools effectively and circumvent any issues discovered..

Test is an area in system development. Test can be performed manually or automated. Test activities can be supported by Word documents and Excel sheets for documenting and executing test cases and as well for follow up, but there are also new test tools designed to support and facilitate the testing process and the activities of the test. This study has described manual test and identified strengths and weaknesses of manual testing with a testing tool called Microsoft Test Manager (MTM) and of manual testing using test cases and test log templates developed by the testers at Sogeti. The result that emerged from the problem and strength analysis and the analysis of literature studies and firsthand experiences (in terms of creating, documenting and executing test cases) addresses the issue of the following weaknesses and strengths.

To automate software testing is an investment, and that makes it important to have good knowledge about automation before an implementation is made. In this master thesis a study about automated testing is carried out. The study also includes a closer look at the testing tool TestComplete. TestComplete is one out of many tools on the market that is developed for automated GUI testing and the goal is to get a picture of how well the tool can adjust to CC Systems own applications. Studies show that it is hard to write lasting test scripts.

The purpose of our study was to look at the connection between theories, research work and concepts when it comes to teenagers and the testing of drugs. The theories we have used are Erikssons development theory, psychoanalysis and labelling theory. Concepts that we focused on for our study were youthculture, the search for identity and the testing of drugs. We did this by asking students, in ninth grade, to fill in questionnaire and interviews.Teenagers find themselves in a confusing stage in life and in a search for their identities they test many different things. The youthculture can be a contributing factor to them testing drugs.

Websites are often developed by small businesses, organizations or individuals which may lead to that the testing gets left behind; the focus is on getting a finished product that can be deployed as quickly and as cheaply as possible.Functional testing is important also for websites and a variety of aids exist. With the right tools and methods the development work is facilitated, and it leads to products with fewer faults.This report shows in the form of a case study how an appropriate tool for functional testing can be selected and how it can be used within development of a website. An analysis of the tools available is reported and JSystem is selected as the most appropriate for this case.It turned out that JSystem could not be used fully as intended in terms of deployment, but a well-functioning alternative solution was developed.A number of test cases were created without any unsolvable problems and JSystem performed well. In JSystem test cases in Java are created in Java, which gives a high flexibility..

This master thesis has been carried out at Scania R&D at the department of Powertrain Control System Development during the winter 2011/2012. The purpose of the thesis was to produce a method that with the result of troubles codes from the field testing would be able to say something about the maturation of a component, in this case the VGT, variable geometry turbocharger. To start with, it was necessary to investigate hich information was available. After the information been summed up in tables and charts, this so that it was possible to understand the huge amount of data, the calculations started.Since the thesis was about maturation of a component the proportions were calculated of components that had a trouble code in contrast of those who passed the test without a trouble code. This Thesis includes background information about basic of statistics and about the company Scania and its testing process.

When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.

Texture is an important soil property and accurate particle size analysis of soil texture is therefore crucial. There are a number of well-established and newly developed methods available for determining soil texture. In order to compare the results of these methods, the differences between them must be determined. The difficulties, problems and differences regarding texture class determination were examined through a study performed on forest soil samples. The study compared different methods (pipette, hydrometer and field methods) and two types of dispersing agents (sodium pyrophosphate and sodium hexametaphosphate (calgon)) commonly used for particle size analysis.

The thesis project is accomplished during winter and spring 2008 at Karlstad University at the faculty of technology and science. The tutor at Karlstad University is Nils Hallbäck and the examiner is Hans Johansson. Rolls-Royce at Kristinehamn in Sweden is the initiator for the project. The thesis project title is design of the blade bolt joint on Kamewa CPP. CPP stands for controllable pitch propeller.

The project deals with the evaluation and testing of speaker and microphone elements as well as microphone cavity.The first part of the report comprises a comprehensive theoretical part about drivers, microphone elements, and to some extent microphone cavity.The goal was to , on the behalf of the company Limes Audio AB, develop proposals on microphone element and cavity as well as drivers for a speakerphone application, based on specific factors. The main factors were performance, price and form factor.The aim was to create the best possible conditions for Limes Audio's software developers to implement the company's audio-enhancing software, mainly adaptive echo cancellation.The testing was carried out using Adobe Audition and MatLab. The test methods were developed in conjunction with Limes Audio and are described below.The project will result in suggestions for a speaker, a microphone and a cavity. The cavity were removed from the product because the results indicated that the cavity matter little for the end result.The report concludes with a discussion on how the measurements could have been enhanced to simplify the interpretation of the results and making the testing more efficient..

Thermal fatigue is a serious problem in todays power plants. A large amount of damages around the world circles around that subject. The damage can come from the mechanism of two flows mixing with different temperatures in a T-junction. It is a fundamental prerequisite that these T-junctions are frequently tested for damages. An amount of criterias steers the rate of testings.

In today?s IT world where software is constructed in a rapid pace, testing has become a crucial area to master when testing has to be done at a greater speed. To still be able to handle the demands of high quality software, companies have to spend more resources on testing and introduce test automation. By automating test cases the testers can gain time which they can spend on doing more complex testing and thereby increase the quality of the software.In this thesis we have helped Extenda AB, who delivers systems to retail companies, to introduce test automation in one of their customer specific projects. This has been done using their own in-house ?capture/replay? tool ECP (Extenda Cashier Player).We have also derived a process that explains how Extenda can introduce test automation on other customer projects.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.