Sekretessbelagd.

AbstractThe aim for this study is to establish how teachers and supervisors at the Child and Recreation Programme interpret the concept ?vocational knowledge?. It is also about how they substantially can see that the pupils are developing vocational knowledge, during their work placement training. The aim of this thesis is to create a base for teachers to work with continuing development in teaching practice. The empirical part of this study is based on interviews. Interviews were analyzed in three categories: definition of vocational knowledge, substantially developing in vocational knowledge and success factors. The result shows that knowing how and knowing why is salient in vocational knowledge.

The aim of this thesis is to use the bibliometric method author cocitation analysis (ACA) and investigate the cognitive structure in a research field, which is called the intellectual base. The research field in this investigation is social psychology. The main question is: what is the nature of the cognitive structure, which contains of the intellectual base. This question is divided in two sub questions: ? Which are the most prominent authors in the research field? ? Which sub areas, based on groups of the most cocited authors in the research field, can be identified?An investigation with ACA is used to describe the general experience of consensus of later authors in a research field.

Det pågår en transformering av svenska stridskrafter till följd av en förändradomvärldsbild och en teknisk utveckling. Obemannade farkoster studeras och bedömskunna tillföra värdefulla förmågor.Syftet med uppsatsen är att undersöka nyttan med små UAV-system för bataljonsnivånvid en internationell militär operation. De fyra utvalda basfunktionerna ledning,underrättelser, verkan och skydd utgör analysfaktorer.Uppsatsens resultat omfattar en kontextuell del och en teknisk del. Den omfattar även envärdering av små UAV-system i ett typfall, strid i bebyggelse. Uppsatsen visar att detfinns ett flertal uppgifter inom basfunktionerna, som små UAV-system kan lösa medvarierad förmåga.

AbstractThe aim for this study is to establish how teachers and supervisors at the Child and Recreation Programme interpret the concept ?vocational knowledge?. It is also about how they substantially can see that the pupils are developing vocational knowledge, during their work placement training. The aim of this thesis is to create a base for teachers to work with continuing development in teaching practice. The empirical part of this study is based on interviews. Interviews were analyzed in three categories: definition of vocational knowledge, substantially developing in vocational knowledge and success factors. The result shows that knowing how and knowing why is salient in vocational knowledge.

Gamification är en strategi som använder spelmekanismer och spelkomponenter för att skapa motivation och engagemang hos användare av olika typer av system. Denna studie syftar till att undersöka om gamification kan användas för att motivera användare av system för tillverkningsindustrin.Studien har genomförts med en initial litteraturstudie och kvalitativa intervjuer med experter inom gamification samt utveckling av system för tillverkningsindustrin. Intervjufrågor har därefter ställts mot tidigare genomförd forskning, för att identifiera möjliga resultat.Resultatet av denna studie visar att spelmekanismer och spelkomponenter skulle kunna användas i ett system för tillverkningsindustrin, förutsatt att det finns ett tydligt affärsmål, mätbar och användbar data samt identifierade drivkrafter hos organisationens maskinoperatörer. Vidare har ett antal punkter identifierats som kan vara motiverande för en användare av system för tillverkningsindustrin:Möjlighet för operatörerna att följa utvecklingen i sitt expertområdeKartläggning av operatörernas drivkrafter, vilken därefter används för att förbättra operatörernas arbetssituation, med exempelvis mer givande uppgifterBelöningar som utdelas är matchade mot operatörernas preferenser, med syfte att vara mer effektiva som motivationsskapare.

This report describes a master thesis performed at Saab in Arboga. The main purpose was to build a controller for a system containing a turn table and an antenna beam. The idea is to use this system on a boat where it will be exposed to position disturbances due to waves. The desired behaviour is that antennas placed on the antenna beam should point towards the same target all the time. To solve this problem the system has been modeled and simulated in Matlab and Simulink.

A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

As companies grow, their need for computing power will increase, which traditionally resulted in companies having to invest in more IT resources. Now, with cloud computing, companies can easily hire computer power over the Internet, on-demand. Cloud computing offers a highly scalable environment where companies can store data and host their services. This paper employs a qualitative study with interviews and literature studies to explore opportunities and challenges associated with cloud computing from a system developer perspective. The aim of the paper is to find out how cloud computing changes the conditions for system development. The paper contributes with four different opportunities and challenges that the system developer must handle to succeed in the world of cloud computing.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..

Man has always in one way or another had to take risks in order to survive, but in today's society, voluntary risks increased markedly. It is about both physical and financial risks. The aim of this essay is to problematize what it is for properties that drive people to extreme sports and adventure travel. We want to see how extreme sports performers own picture looks compared to how the media presents them. We have in this essay interviewed two long sailors, a BASE jumper and an ex-mountain climber to see how the performers own picture of reality looks.

Syftet med undersökningen är att ta reda på om begreppet ?Tekniska system? tas upp i förskolan. Dessutom undersöks hur förskolorna arbetar med teknik enligt den reviderade läroplanen, Lpfö 98.Som metod användes enkäter där pedagoger satt i arbetslagsgrupper och besvarade frågor. Enkäten används för att få en bättre bild av hur ålder, kön, tidigare utbildningar och yrkeserfarenhet förhåller sig till kunskapen av teknikämnet.Undersökningen visar att alla förskolor använde sig av begreppet tekniska system på ett eller annat sätt i samtal med barnen, till exempel vid toalettbesök, samt frågor ?vart tar rören vägen vidare till reningsverket??Vidare framkommer det att fler fortbildningsdagar och studiebesök är önskvärt för att pedagogerna ska få en större vetskap om begreppet tekniska system.

The problems around and the planning of wood flow is some of the most complex issues in the forest-sector. The experience and overview of the single employees is crucial for the possibility of correct tactical and economical decision-making. The increasing demand of savings and shorter reaction-times with greater flexibility in the wood-supply-chain, makes solutions and aids for improved effectiveness in the work and processes according to wood-flow urgent. Holmen Skog is starting to develop a new forest-road-management-system. The system will facilitate the work according to construction, improvements and updating the standard of roads.