This study investigates three different methods for evaluating MOE,Modulus of Elasticity, in field measurements. The purpose is toinvestigate the possibility to use dynamic measurement methods infield measurements that hitherto (2010) has been performed with staticmethods. The objects of investigation are 20 glulam beams. The firstfield measurement took place in november 2007 and applied a staticmethod based on the standard SS-EN 408. The second measurement,described in this study, took place during summer 2010, and appliedstatic as well as dynamic methods.The MOE of wood is affected by a range different factors.

During this master thesis, wear and friction properties for the high-Temperature alloy Kanthal APMT were studied. The results were also compared to 253MA. The initial tests showed, among other things, that the surface fineness of the muffle tubes matters in real applications like conveyor belts. A 253MA-sample wear-tested against a 253MA-tube showed lowest wear at 900°C while a pre-oxidized APMT-sample wear-tested against a APMT-tube had the lowest mean value of the friction force at 1100°C, compared to all other tests..

The consumer society exploits the earth?s resources more than the earth itself has capability to produce. This over-consumption causes a mass production of products, which mean that more greenhouse gases are being emitted to the atmosphere. This is one of the reasons why the earth?s Temperature is rising, where the result of it is worldwide disasters.

SUMMARY Several studies have shown that weaning pigs are in great need of heat. The reason for this is mainly because the pigs are given very little feed just after weaning. Some of the pig producers of today have tried to get along with these problems by building some kind of hut for the pigs. Some of these pig houses have been included in this study.The study has shown shortcoming functions for the pig cottage. The expected heat increase has not occurred.

This report describes an investigation of the indoor climate in two different workspaces. Since we a big part of our lives are staying indoors in artificial environments, and more particularly in our workplaces, we think it would be interesting to do this investigation. The technical solutions for air treatment systems began with simple natural systems without fans and where the thermal rise of the air applied. In modern time is technical air treating systems used to take care of the fresh air supply. This type of units can supply filtered air with the right Temperature to the building. Well-functioning ventilation is essential to bring clean fresh air to the room and effectively remove impurities without sound- or draught problems. The indoor climate is relevant for the output capacity.

A titania-supported nickel catalyst was prepared and tested in methanation in order to evaluate its catalytic properties (activity, selectivity and specially, activity loss), and compare it with an alumina-supported nickel catalyst.The titania-supported catalyst did not only show higher stability than alumina, but also presented a different cause of deactivation, carbon formation. In addition, a kinetic model was obtained for the titania-supported catalyst, and a study of the effect of different operating conditions (Temperature, composition and partial pressures of synthesis gas and water) on the deactivation rate and carbon formation of this catalyst was performed.

VAV (Variable Air Volume) system has been studied in a newly constructed office-building. The goal for the study has been to evaluate how the ventilations system work in practice, if adjustments can be made to achieve an more energy efficient system and to evaluate if other alternative ventilation systems is to be preferred in the further.The degree project has been executed at Helenius Engineering Firm who is working with the environment, media systems, HVAC and energy in buildings. The building that has been studied is owned and operated by Akademiska hus.Literature studies, visits at site, inventory, review of system documentation, energy analyses, interviews, key figures, LCC, sand energy- and indoor climate simulations has been made to study the building. Where appropriate some tools from Six Sigma have also been used.How to achieve an energy efficient system and a pleasant indoor climate is studied with human health and well-being as base for the indoor climate requirements. Technical support systems such as ventilation systems have to be designed so that an acceptable indoor climate can be achieved.

Because of new emission and on board diagnostics legislations, heavy truck manufacturers are facing new challenges when it comes to improving the engines and the control software. Accurate and real time executable engine models are essential in this work. One successful way of lowering the NOx emissions is to use Exhaust Gas Recirculation (EGR). The objective of this thesis is to create a mean value model for Scania's next generation EGR system consisting of a poppet valve and a two stage cooler. The model will be used to extend an existing mean value engine model.

In this study the spawning migration activity, habitat choice (depth and Temperature), foraging activity, duration of stay in the spawning site and homing-behavior was studied for anadromous pike (Esox lucius) in the wetland Österby myr, Gotland.The spawning migration was concentrated to dusk and dawn, a homing behavior was confirmed and there was no significant difference between sexes with respect to duration of stay. A difference in habitat choice and small variation in foraging activity between individuals was established..

Free2Move AB is developing products for the market within wireless communicationand identification, among those active RFID-tags. The company had an idea aboutproviding one of their active RFID tags with a GPS receiver and transmit positions viaan existing RFID protocol. Desire from the company was also the possibility to logpositions and measure Temperature. The finished prototype should also be able to beactivated by movement. The company had proposal about components that were to beused in the project.

Thermography is the assesment of the surface Temperature of the horses body and it falls into the categori of physiological imaging. Thermography allows us to portray inflammation and changes in sympathetic tone in a graphical manner. The purpose of this study was to review thermography in equine medicine and to evaluate thermography as an aid in the diagnosis of lamness in horses. Thermography has been helpful to identyfy sprains, stress fractures, shin splints and soft tissue, tendon, ligamentous and nerv injuries and to monitor healing processes during rehabilitation. Routine thermography may reveal inflammatory responses prior to clinical signs. In present study thermograpy gave especially valuabel information in two cases. In one horse reduced blood flow in a. saphena due to a thrombosis were visualised and in the other horse bilateral thoracolumbal radiculopati was diagnosed.

This work is a combination of a literature study and a practical pilotstudy. In the literature study essential physiological reasons of why anaesthesia of horses is so risky are explained. Diffrent methods of induction and recovery are brought up, together with significant aspects of positioning the horse on the operating table and perianaesthetic complications such as myopathy, neuropathy and limb fractures. The pilotstudy had the purpose of examine the bodyTemperature of horses undergoing general anaesthesia and to control the perianaesthetic Temperature measurements performed in Swedish horseclinics and veterinary hospitals. Our hypothesis was that the bodyTemperature of the horses would decrease but not enough to cause a problem. The purpose of this work has been to gather more profound knowledges in the subject of perianaesthetic nursing of horses which is an important part of the assignment of a veterinary nurse..

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high Temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired Temperature with the amount of combustible substance.

I föreliggande uppsats var syftet att i en mixad design med kontroll- och behandlingsgrupp, undersöka om psykofysiologisk strategiträning kan hjälpa individer att hantera stress samt förbättra sin prestationsförmåga i pressade situationer inom golfputtning. Strategiträningen innefattade en kombination av andning-, rörelse och kognitivt beteende. Resultatparametrar var a) fingertemperatur som indikerar förändringar i det sympatiska nervsystemet och b) ett protokoll som mätte prestationsdata. Data har analyserats med hjälp av ANOVA ?repeated measures? i SPSS.Huvudresultatet visar signifikant fingertemperaturskillnad mellan behandlings- och kontrollgruppen.