AbstractThe indoor environment affects the human performance. Noise pollution, poor lightning and coloring are some of the factors that affect our work performance. The human is also affected by the air change and temperature, these factors are in most buildings possible to adjust and through this make economic savings. To find out about the indoor environment in the O-building a questionnaire was handed out, measurements/surveys and an interview was also made. 108 questionnaires where handed out to employees and students.

To better understand how various factors affect the establishment of forest and trees around the tree line-ecotone, this study was conducted in Troms County, Norway. The altitude of different forest and tree limits together with the surrounding vegetation type were collected during August 2011. Comparisons of the collected data were made with previously collected data from the same sites conducted 1914 and 1915. On average the forest limit has expanded with 26 meters in altitude, however, an expansion is not statistically significant for the whole area. The tree limit has significantly expanded in altitude.

This report was written as a final thesis within the Department of forest economics at the Swedish University of Agricultural Sciences as a completion of the M.SC Forestry programme. The aim of this study was to create a model that, with respect to given stock levels, temperature, fuel usage and fuel price, would identify the optimal levels for purchase of bio fuels, optimal levels of incineration of bio fuels and the sum of the present values of all costs. The model would be applicable for a larger district heating plant. Data regarding temperature were received from SMHI. Information considering fuel prices was taken from the Swedish Forest Agency and the facts about fuel usage were collected from a large district heating plant, located in the southwest of Sweden. For the temperature, a sinus curve was adapted to describe the temperature over a year.

The dishwasher is a wide spread product that occurs in many households. It saves the user time,water and energy. When using a dishwasher instead of doing dishes by hand a lot of energy issaved.The importance of lowering the energy consumption does not only come from the consumerwinnings but also from an environmental point of view. Scientists are certain that the globalwarming comes from the emission of green house gasses that is created by human consumptionof oil, gas and coal.Dishwashers today are a lot more energy efficient than older dishwashers, but there are stillmargins to lower the energy consumption. The aim with this project is to investigate thedishwasher and it?s washing cycle, noting different phases and components that contribute towaste of energy.

The aims of this project were to describe the circumstances around dogs being left alone in cars, to investigate owners? knowledge of the risks associated with leaving dogs in cars and the relevant legislation and, finally, to study how changes in the air temperature and air composition in the car affect the dog. The project consisted of a survey of the literature, a questionnaire part and an experimental part. An important conclusion is the importance of the level of knowledge of owners, since there are several ways in which an owner can prevent their dog from heat stroke and, in the case of an eventual accident, their action can have direct consequences in minimizing the long-term damage to the dog and even whether or not it survives. Fewer than half of the owners in the study knew that for a dog suffering heat stroke, the most important thing is to bring the body temperature down. Only a third of dog owners knew that if a dog is left in a warm car and showing signs of heat stress, then the police should be contacted and the dog quickly helped out of the car.

Storing kinetic energy in a flywheel allows for more efficient driving of electricvehicles. Research in this area is in progress at Uppsala University, where a flywheelwith magnetic bearings encased in a vacuum chamber is being constructed. To makethis possible methods for measuring the current through the electromagnets in thebearings and temperatures in the flywheel need to be developed. This has been thepurpose of this report. The current measurement resulted in a resistive method, andthe implementation of eight measurement circuits in the system.

Hypothermia during anaesthesia is a well-known phenomenon that may cause several side-effects such as greater risk of postoperative wound infection and increased risk of heart complications. The most efficient way to avoid this is to prevent hypothermia from occurring. The aim of this paper was to compile the research on the most efficient way to prevent hypothermia during anaesthesia for cats and dogs, and to compare these results to how Swedish animal hospitals prevent hypothermia today. To investigate this, a survey was sent out to several animal hospitals around Sweden to see what methods they used to prevent hypothermia in their clinics. It is difficult if not impossible to prevent the body temperature from falling slightly when anaesthesia is induced because of the drug interactions in the body that follow from the drugs given. A 1-1,5°C decrease in body temperature is to be expected and is difficult to avoid.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

Nimo Verken AB is the leading producer in the Scandinavia of drying cabinets. The construction has, with small changes, been the same since the 70s with a thermostat and a timer as controlling system. There was a wish to develop a modern cabinet which showed remaining time on a display and with energy saving functions.In this report we go through how it is possible to implement a digital controlling system, where remaining time is shown on a display and where it is possible to choose a preset ?program?.The report first presents the fundamental theory for a PIC, where we describe the different registers, how interrupts are handled, the internal clock function and how data is sent to control the different parts of the construction.Next the report presents and describes the new hardware that is needed, such as the encoder, the temperature sensor and the display.After the theory we describe how the program in the PIC may be drafted. Last in the report we have the result of the tests of the temperature variations and the accuracy of the time..

Norconsult AB has developed a solarhousing concept, a house designed for the warm climate in the Middle East andwith large quantities of solar panels installed. The cooling system for the house was designed in an earlier report, the purpose of this thesis is to investigate the possibility of short and long term storage of thermal energy via an underground energy storage volume.Two different designs of the storage and three different filling materials have been integrated into a model to simulate different cases. The first design consisted of pipes installed in the ground, without insulation. The second design consisted of an insulated concrete box installed to prevent thermal energy from the surrounding soil to flow towards the lower temperature regions within the storage. The three different filling materials were dry saudi sand, water saturated saudi sand and the filling material used by the client for energy storage in Sweden.The results from the simulations show that neither of the designs, regardless of the filling material, managed to extract enough thermal energy from the house to the ground to uphold the demands of indoor climate.

The aim of these two studies was to investigate the possible physiological, behavioural and emotional changes that appear after human-horse interactions and also to find an explanation to why they occur. One aspect that is discussed is whether the wellbeing of humans can be coupled to interacting with horses and of how the animals respond to the interaction. The first study was performed on 9 horses and their owners, both parts being subjects to registrations during 4 different interaction treatments. The second study was performed on 6 horses with registrations only being performed on the horses during 2 different treatments. Nine horses underwent 3 different treatments all performed by their owners (H = stroking of the horses forehead, B = brushing and M = stimulation of the withers) in addition to a control round (K). Each treatment lasted for 4 minutes but observations were performed until after 45 minutes from start.

In this project forging of aluminum alloy Al 6026 T9 has been performed in the temperature range of 400 °C ? 470 °C. The alloy which was in the shape of a cylindrical billet was formed in a press with the aim of analyzing the effect of different forging temperatures and required press load for optimal die filling. The component?s dimensions were later measured and compared to a reference piece.

There are many different recommendations on how to keep pelargoniums over winter, but most of the recommendations suggest ?the higher the temperature, the more light and water the pelargonium needs?. The purpose with this paper is to try to explain the best and the worst results that are achieved with different storage alternatives of zonal pelargoniums. The results are based on an orientating investigation carried out in January-February, and a questionnaire that members of the Swedish Pelargonium Society answered to. Both the orientating investigation and the questionnaire showed that zonal pelargoniums are best stored light and cold but frost free. They should be irrigated according to their needs which is when the soil is dry, about every second to third week. Zonal pelargoniums are very resistant to drought and can survive without water for at least 44 days, both when kept under light and cold as well as under light and warm.

Today, there are no regulations saying that cows must have access to some kind of shelter at pasture during the summer. In more tropical countries, it is well-known that dairy cows might suffer from heat stress when exposed to sun and high temperatures. The well-being of the cows is thereby reduced and the production may also decrease. In Sweden, no research has been done in the area and therefore it is now a clear need of improved knowledge.The purpose of this study was to investigate the importance of shade for dairy cows in Sweden. The behaviour of 30 cows was examined to see any differences between cows with access to shade and cows without access to shade.

In this report you can get a complete instruction about how to build your own development system for the PIC-processor. This card will be used for laborations for the students at LITH-ITN. With this card you can send new assembler codes (new instructions) down to the microprocessor via the Serialport on your computer. Then the new instructions for the microprocessor will start to execute. We made a solder paste stencil at Campus Norrköping solder paste stencil laboratory.