High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

The purpose of this thesis is to evaluate and update load curves for Fortum Distribution AB. Theload curve method is a tool used to forecast the strain of an electric grid. The method is based oncustomer annual energy consumption, outdoors temperature as well as customer category. Theload curve method was established by Svenska Elverksföreningen at the start of the nineties andfocus was put on standardizing annual energyconsumption, in order to make the method usableacross the nation. Present consumption patterns have changed since the original load curves wereproduced, which leads to a need to update the load curves.The work began with an update of present load curves according to recommendation taken fromanother earlier thesis.

The main purpose of this study was to determine the impact of bedding material on the faecal microflora of horses. Another objective was to investigate the hygienic and physical qualities of the bedding materials used and how these may change in the course of the trial period. The bedding materials used were sphagnum peat and wood shavings. Six horses had each material as bedding for a three week period in a change?over experiment.

This project investigated how elevation and vegetation type influences variation in plant litter phenolic content and protein precipitation capacity among and within common plant species for two different vegetation types, heath and meadow, in a subarctic ecosystem in the Abisko region of northern Sweden. As nutrient availability generally decreases with increasing elevation as a result of decreasing temperature, I hypothesised that phenolic content would increase with elevation and be higher on the heath than the meadow. To test this, the total phenolic content and protein precipitation capacity was estimated in leaf litter from 13 species in both heath and meadow vegetation across an elevational gradient ranging from 500 to 1000 meters above sea level (m.a.s.l.) in the study region. The results showed that elevation and vegetation type both had a strong impact on both variables. Total phenolic concentrations decreased with elevation for the meadow, and were greater for the heath than the meadow.

Today?s climate research shows that the climate may increase its temperature. One sector that is being threatened by global warming is the winter tourism of the Swedish municipality A?re. Tourism is an important economical source of income in A?re and is now threatened by a shortened winter season.

The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.

In Sweden there are 1894 small-scale hydropower plants in operation, which together generate 4.3 TWh of electricity per year according to Swedish hydropower compound (SVKF, 2011). This corresponds to the annual consumption of about 860,000 Swedish households (based on an annual consumption of 5000 kWh). In the mid-1950s there were around 4000 small-scale hydropower plants in operation in Sweden before cheap fossil fuels and uranium competed with them, in the current situation only 1,894 of these are in use. If slumbering small hydropower plants once again would be taken into use and some new ones are built, we would be able to extract about 7 TWh of renewable electricity from these annually in Sweden, representing about 1.4 million households.The thesis intends to calculate and construct a hydroelectric power plant at the existing dam in Olofsfors and give suggestions on how the power station should run during the time that fish migration is greatest in Leduån.The turbine and generator to the station in Leduån at Olofsfors is designed by the height of the fall and the water flow through the dam. The turbine selected for the station is a CK-1000RM turbine with a 4-pole 250 kW generator from Cargo & power turbine Sweden AB, which is expected to deliver 1.2 GWh per year.

This Master Thesis is a product development project that has been carried out incooperation with Metso Paper Sundsvall AB. The task has been to develop a holdingsolution that generates force between two rolls and to evaluate the new solution withrespect to functionality, manufacturing, structural stability, costs, assembly etc. Theroll holding solution is a system that is part of a rollpress. The rollpress is used towash and dewater pulp. The existing solution creates forces that have to be absorbedby the gable of the press.

Dragonflies are fascinating. The larvae stays larvae from a couple of weeks up to 5 years, it depends on the species (Hansen, 1981). The temperature, nourishment and time of the year also play a role for the growing factor for the larvae. Both Sahlén (1985) and Begon a.o (1990) say so. My report contains information about the branched setae on the front legs from the family damselflies (Zygoptera) and the species Coenagrion.

Companies and special interest organizations pays multiple millions each year in order to reach out with messages about that their products are biggest, best and most beautiful. The publicity happens among thing like TV, in brochures, on the Internet andin newspapers etc. places. This means that consumer permanently becomes affected of publicity, and is thereby in an exposed situation. Around the EU, the border of what to consider undue or not, have been in different levels.

As a hibernating species, the brown bear spend most of the winter months in a den as astrategy to avoid unfavorable conditions. The denning period is a vulnerable time for bears,making them unable to flee disturbances without losing valuable amounts of energy. Brownbears' wariness of humans and avoidance of anthropogenic disturbance often steer denningbears away from human infrastructure, and bears thereby avoid possible disturbance and itsassociated energetic costs. This study was carried out to test the hypothesis that bearsdenning closer to infrastructure select more covered den sites to compensate for the closedistance. Dens from 32 individuals were visited and analyzed in terms of sighting distance(a measurement for den horizontal cover) and habitat ruggedness, in relation to distances toinfrastructure.

The aim of the project was to study the effect of oral administration of glucose and leucin on the resynthesis of muscle glycogen after intense exercise in Standardbred trotters. In a crossover design, 11 Standardbred trotters performed a standardized exercise test on two occasions in order to deplete muscle glycogen. The exercise test comprised a warm up period, 7 repeated bouts of exercise on an uphill 500 m slope, and a recovery period. After the exercise test horses received: 1) a solution of glucose and leucine via a nasogastric tube at 0 minutes and at 240 minutes post exercise and a single bout of glucose at 120 minutes post exercise or 2) water (placebo) at 0, 120 and 240 minutes. Blood samples for measurement of glucose and insulin concentrations were collected at rest, when the horses returned to the stables directly after exercise and throughout the 6 hour recovery phase. During the first recovery hour, samples were collected every 15 minutes and then every 30 minutes over the next 5 hours.

BAKGRUND: En av våra snabbast växande folksjukdomar i dagens samhälle är demens. Individer med demenssjukdom besitter olika hinder därav bl.a. kognitiv påverkan eller kognitiv svikt, vilket i sig medför svårigheter av kommunikationsart. Detta medför vidare problematik kring identifieringen av smärtsymtom. SYFTE: Att undersöka hur sjuksköterskor bedömer smärta hos äldre personer med en diagnostiserad demenssjukdom.

Examensarbetets syfte var att skapa ett generellt mät- och styrsystem som är möjligt att fjärrstyra över Internet. Systemet består av en kontrolldator och ett antal separata moduler, vilka var och en realiserar någon typ av mät- eller styrfunktion. Användningsområdet för ett sådant system är brett; det kan exempelvis användas inom automation av bostäder, för process-övervakning och styrning inom tillverkningsindustrin, eller inom under-hållningsbranschen.Eftersom ett fullt utbyggt system kan bestå av ett drygt 100-tal olika mo-duler, är det här examensarbetet av praktiska skäl begränsat till att rea-lisera en handfull av dessa. Då systemet är enkelt att skala upp, är den be-gränsningen i antalet realiserade moduler i prototypsystemet inget som påverkar de erhållna resultaten. Exempel på storheter som kan övervakas är temperatur, avstånd, lufttryck och ljusstyrka.

The thesis has investigated the use of templates in timber framing, a field where there has previously been a lack of comprehensive and clear information. The main goal was to map and describe the various types of templates, their appearance, usage, and function, in order to make this traditional craft more accessible to both professional craftsmen and DIY enthusiasts. The project also aims to contribute to the preservation of traditional building crafts, in alignment with UNESCO's Convention for the Safeguarding of Intangible Cultural Heritage. The methodology used in this study was a literature review, where relevant templates were gathered and analyzed. The templates were then categorized using a system developed by the author, which helped simplify the understanding of the templates functions and uses.