Background: Investors have several options to choose from when the goal is to achieve the highest yield at the lowest cost and risk. Stocks are a common investment options, but is also associated with risks. Portfolios are usually constructed with several different assets to reduce the unsystematic risk of investment. Funds are similar to composite stock portfolios, the big difference is that they dealt with in their entirety and investors may not affect the fund's content. The problem remains that whether you choose stocks or mutual funds there is still uncertainty as to how the future will unfold.

A titania-supported nickel catalyst was prepared and tested in methanation in order to evaluate its catalytic properties (activity, selectivity and specially, activity loss), and compare it with an alumina-supported nickel catalyst.The titania-supported catalyst did not only show higher stability than alumina, but also presented a different cause of deactivation, carbon formation. In addition, a kinetic model was obtained for the titania-supported catalyst, and a study of the effect of different operating conditions (temperature, composition and partial pressures of synthesis gas and water) on the deactivation rate and carbon formation of this catalyst was performed.

Food-poisoning is a major health problem and an estimated half a million Swedes are food-poisoned annually, with acute gastroenteritis as a consequence. One of the major causes of contaminated foods is related to food- and waterborne viruses. To be able to trace back the source of contaminant, the method of detecting viruses must be specific and sensitive. No standardized method for detecting foods for sapovirus exists today. The aim of the work described in this bachelor thesis is to implement and opti-mize a real-time RT-PCR method for the detection of all genogroups of human sapovirus in foods.

Arvika Fastighets AB is a municipal subsidiary tasked with managing all green areas in the municipality, with a strong focus on the City Park and plant beds in the city centre. These areas generate large amounts of green waste, which is currently transported to the municipality's composting area at Lycke. Currently, the material is piled up and turned once a year without using the resulting soil for flowerbeds, lawns, and shrub/tree plantings. The purpose of the study is to determine if Arvika can compost the green waste in a more efficient manner and produce weed-free soil ready to be mixed into various substrates for different purposes. Interviews with the Swedish Church and several municipalities in Sweden have been conducted to learn from their experiences and knowledge of how they make their composting work.

Background: Investors have several options to choose from when the goal is to achieve the highest yield at the lowest cost and risk. Stocks are a common investment options, but is also associated with risks. Portfolios are usually constructed with several different assets to reduce the unsystematic risk of investment. Funds are similar to composite stock portfolios, the big difference is that they dealt with in their entirety and investors may not affect the fund's content. The problem remains that whether you choose stocks or mutual funds there is still uncertainty as to how the future will unfold.

Many traffic incidents are due to the driver?s lack of attention, resulting in dangerous lane departures, either sliding off theroad or into the oppose lane. These kinds of incidents often have serious outcomes, which has led to much effort being concentrated on preventing or lessening the damages when the incident is already a fact, for example by installing safety belts and air bags. These measures may be considered to be acts of so-called passive safety. Active safety on the other hand, means that the safety systems intervene before the incidents have occurred.

Simulation of different systems can be done using a graphical model description of the system based on block diagrams. The simulation software Matlab/Simulink offers a lot of possibilities to describe a huge number of systems, which can be linear as well as nonlinear. The simulation using Matlab/Simulink is done by integration based on different kinds of numerical methods.When nonlinear Simulink-models are simulated, it is often interesting to apply a Kalman filter to handle the noise that may occur within the process as well as corrupting the measurement. However, application of such a filter leads to an extensive time-consumption despite using fast computers. The reason is that the existing Matlab functions are not constructed for time optimal evaluation.

To conclude this year?s introductory course in Mechatronics the students, in groups of 6,constructed a prototype based on the technical requirements established by the course teachers.This year they consisted of the following: two wheels only, active balancing, remote controlledand able to stop when crossing a pre-determined marker on the ground. The project lasted for 7weeks and the result is a working prototype and this report.The report reviews the chosen solution, subsystems and the finished prototype as well assuggestions for improvements, discussion and analysis.The prototype constructed embodied most of the group?s earlier individual technical specialtiesand consists of the following: a flywheel for balancing, ultrasound for angle measurement, areflective photomicrosensor to detect the marker and Bluetooth for the hand control..

Background: Investors have several options to choose from when the goal is to achieve the highest yield at the lowest cost and risk. Stocks are a common investment options, but is also associated with risks. Portfolios are usually constructed with several different assets to reduce the unsystematic risk of investment. Funds are similar to composite stock portfolios, the big difference is that they dealt with in their entirety and investors may not affect the fund's content. The problem remains that whether you choose stocks or mutual funds there is still uncertainty as to how the future will unfold.

AbstractTitelEffektmätning av ett utbildningsprogram ? genom lärande utvärderingEngelsk titelEffect Measurement of a Training Program ? through Learning by EvaluatingHandledareLars HolmstrandExaminatorMagnus SöderströmDatumJuni 2011Antal sidor77Nyckelordutvärdering, lärande, effektmätning, lärande utvärdering, formativ utvärderingKeywordsevaluation, learning, effect measurement, learning by evaluating, formative evaluationThe aim of this study was to investigate which effects a competence development effort has had on individuals and group, as well as in which way formative elements of evaluation possibly could have contributed to learning. The target group of the study was employees (eleven), their managers (seven) as well as co-ordinators (two) of a maintenance department at a nuclear power plant. The training program lasted from December 2009 to May 2010. The study was in progress as of September 2009 when a decision was made at the maintenance department?s training board to carry out the evaluation.

During the 19-century a global warming has been observed, which includes increases in global air and ocean temperatures, widespread melting of ice and snow, and rising global sea level. There is a clear connection between emissions of greenhouse gases caused by the human and the increase in temperature. Climatic changes caused by global warming can be stopped trough decreased emission of fossil fuels, for example by an increased use of biogas. Biogas is a renewable energy source which is produced through anaerobic (oxygen free) digestion of organic material. The gas is a mixture of methane (CH4) and carbon dioxide (CO2) and can be among others used as fuel in vehicles.

This thesis concerns how the power quality in the grid is affected by the connection of wind power plants. As things are at present, Fortum Distribution AB has a number of wind turbines and wind parks connected to the own grid. As the pressure on building and connecting additional wind power is increasing, so is also the interest of how the already existing wind power generation affects the power quality in the nearby distribution grids. The study is performed by direction of Fortum Distribution AB and is limited to the 10 kV/40 kV-grid in Bohuslän, Sweden. The methods for calculation of power quality are compared to the results of a number of measurements.

This master thesis is a study of anaerobic thread lockers and is done in cooperation withÖhlins Racing AB, which is a Swedish manufacturer of vehicle suspensions.The suspension in vehicles is constantly exposed to high vibration levels and a suspensionunit has several screw- and cylindrical joints. As an extra safety precaution so that thecomponents in the suspension doesn?t fall apart when using the vehicle, an anaerobicthreadlocker is added in these joints. The handling of these threadlockers is not totallyharmless and could lead to allergic reactions, and therefore there are Swedish laws to limit theuse of these. However, new types of anaerobic threadlockers have recently been launched onthe marked that are not considered under this law.

Background: Investors have several options to choose from when the goal is to achieve the highest yield at the lowest cost and risk. Stocks are a common investment options, but is also associated with risks. Portfolios are usually constructed with several different assets to reduce the unsystematic risk of investment. Funds are similar to composite stock portfolios, the big difference is that they dealt with in their entirety and investors may not affect the fund's content. The problem remains that whether you choose stocks or mutual funds there is still uncertainty as to how the future will unfold.

Performance measurements have become very important tools for companies because of ever increasing global competition in today?s market. Delivery dependability is one of the three most important performance measurements for companies to focus on and that makes this analysis, of the dependability, both very interesting and up to contemporary. In this rapport different aspects of delivery dependability will be dealt with, and a weight will be on what to measure and how to measure it together with how to present the outcome of the measurements. A discussion has also been held regarding what goal the company should have on its dependability.