This is a report written for an examination project C-level, on the subject of energy. The examination project is a product of the FVB Sweden AB (district heating bureau). It started with a meeting with Stefan Jonsson FVB Sweden AB, were he explained the content of the project, and from this a presentation of the problem was made. The problem that needed to be solved was how they could control the valves in the system to provide heating to everyone in the system. The valves are often oversized so the pump in the heating plant would have to be enormous to be able to provide enough flow to be sufficient, if everyone in the system had there valves fully opened. I came up with two solutions to the problem, one was a wireless network that could keep track of the valves and the other solution was an extra sensor that was placed on the radiator.

This thesis examines different methods for the cooling of data centers. Several means of cooling with the refrigeration cycle have been studied, as well as the feasibility of using free cooling in different parts of Sweden. In addition, the possibilities of transferring excess heat to a nearby district heating system were investigated. It was found that in all investigated cases except two, the data center could be cooled solely with free cooling for at least 300 days a year when only the outside air temperature was considered as a constraining factor. The limit was then set to 20 °C.The vast majority of all district heating systems in Sweden get little to none of their heat from other excess heat sources.

With climate change, the temperature and relative humidity in Sweden are increasing. The majority of historical environments lack protection against this increase, which also increases the risk of mold infestation in these environments. One of these environments is N??s Slott, in which several rooms have recurring mold growth on objects and furniture. By examining one of the rooms in the castle that is in the risk zone or has mold growth, factors behind the mold growth can be investigated in order to create a basis for future actions against mold.

 Bachelor thesis within Business AdministrationTitle: Effective estate managementAuthor: Joacim StåhlPatrik StyrbjörnTutor: Gunnar WramsbyDate: 2008-06-05Subject terms: Estate management, efficiency, key figure, good examples, manager, real estate Abstract:Background: Concerning the global economy and the picture given in real estate business that efficiency and profitability are needed to survive is it intresting to study and search for good example to reach an effective and profitable estate management.Purpose: The purpose of the thesis is to describe the work of real estate concern to reach efficiency and profitability from the owner/manager perspective.Method: Through qualitative interviews with eight respondents in four different real estate concerns describe good examples on effective estate management and with this fulfil the purpose of this essay. Two interviews per company were made, one at the company and one over phone to reach better security concerning the answers.Theory: The theory is divided in to four mainparts were the first two explains estate management and financial control. Thereafter comes an impression concerning efficiency and how efficiency is secured in estate mangement from a theoratical perspective.Empiri: This part of the essay is about the interviews made and through them show how real estate concern works with efficiency by focusing on good examples in which the companys find themself efficient.Analysis: Comparing the theories and the empirical research to analys and try to describe efficient estate management.Conclusions: Efficient estate management is about controlling the costs and especially about the opreating costs. Important to reach operative efficiency is therefore to continuosly follow up the costs and to do readings every month. To compose and continuosly work with budget and action plans for each estate is important in order to reach efficiency in the management of estates.

Energy consumption is at present a major political issue, and numerous projects that comprise many nations are currently in process to increase energy efficiency and bring down energy dependency. As a member state of the EU, Sweden now faces the challenge of implementing substantial energy-saving measures until the year 2016. One of these measures is the project ?Green Islands? financed by the EU that intend on creating sustainable islands in areas around the Baltic Sea. The Archipelago Foundation leads the project that concerns the Stockholm archipelago, where focus has been placed upon decreasing energy usage in businesses and services on Utö among other islands.

This paper is an event study on Initial Public Offering?s return behavior after the dot com bubble. Cumulative Abnormal Returns are used to measure the performance against a market index. The results suggest that the market correctly prices IPOs in the long run thus upholding the Market Efficiency hypothesis. Moreover, value weighted CARs show that large IPOs are more likely to outperform smaller IPOs, however in the long run there is an unpredictable pattern.

Environmental impact and management of energy is a highly topical issue in today's society. Climate impact must be reduced. The Government has set a target to reduce energy consumption in buildings by 20 % by 2020 and 50 % by 2050 compared to the energy use in 1995.With this in mind, we chose to examine how property owners can work on improving energy efficiency in existing apartment buildings. We also wanted to investigate profitability of different increasing energy efficiency measures and the calculation methods and the risk assessment performed by such investments. To tie in with government objectives, we also saw the possibilities of achieving these goals.20 companies were interviewed, of which 14 were property owners and 6 were consulting firms that works with energy efficiency.

In this Thesis the possibilities of designing a larger building that is very energy efficient in the sense that it would not need a conventional heating system are discussed. Solar radiation transmitted through the windows, internal heat from occupants, lamps and electric appliances inside the building and heat recovered from the ventilation system then have to be sufficient for the heating of the building. This study is of general interest since the property company, Akademiska Hus, plans to use this study as a first step in determining if this technique could be used in the future and thus be worth further investments. A building without a conventional heating system of the size investigated in this project has not yet been built.The energy needed for the heating of the building was simulated using VIP+.The conclusions from the study are that it is possible to build large buildings without any conventional heating system. This could be achieved in many different ways, for example by lowering the inside temperature or by using better windows and heat recovery system with higher efficiency.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

This essay will explain the effects of decentralisation, and what impact it has on the efficiency to create a better integration for immigrants on the Swedish labour market. Examples of literature that has been examined are Marcus Gossas and Jon Pierre. From these authors, I have been trying to explain the relationship between decentralisation, cooperation and efficiency.Since the end of the Second World War until the middle of 1980, Sweden mostly received labour immigrant. Since then, the immigrant pattern has changed to consist of mostly refugees. Changed immigration patterns together with increasing debts for the Swedish government has lead to decentralisation and cooperation between public authorities has therefore become a target to reach better efficiency.

The objective of this thesis is to explore opportunities to enhance the phosphorus use efficiencyof inorganic fertilizers in crop production, with techniques available today and in thefuture. Phosphorus is a finite resource of declining quality; therefore a phosphorus use efficiencyin crop production of only 15-30 % is unacceptable. The main reason for low efficiencyis the retention by Ca and Mg in calcareous soils and Fe and Al in non-calcareoussoils. Due to the low mobility of phosphorus, plant uptake is mainly dependent on root growthrather than diffusion. Therefore, measurements need to be taken that benefit contact betweenroot and fertilizer, before fertilizer phosphorus becomes unavailable to the plant.

This paper aims to, through a literature review, examine how to best design and adapt calf huts to meet the calf's physiological requirements and reduce the infection pressure for enteric and respiratory diseases. It illuminates how the calf relates to different temperatures and climate, which temperature control mechanisms it uses and its ability to perform these regulations, as well as providing a summary of the past decades´ research on the calf huts housing system. These two theory chapters, along with a concluding discussion, provide a better understanding of how to, especially in temperate climates, design the most suitable calf hut, which cater to the calf's both thermal comfort and physical health. The literature suggests that the calf's own temperature control works well to counteract the temperature outside the desired range, and that one of the most important factors rather is ventilation of a calf hut, which reduces moisture and pathogens. The conclusion of this paper is mainly that there is not an obvious way to place and construct a calf hutch and that most design principles contribute to both positive and negative effects simultaneously.

AbstractThe indoor environment affects the human performance. Noise pollution, poor lightning and coloring are some of the factors that affect our work performance. The human is also affected by the air change and temperature, these factors are in most buildings possible to adjust and through this make economic savings. To find out about the indoor environment in the O-building a questionnaire was handed out, measurements/surveys and an interview was also made. 108 questionnaires where handed out to employees and students.