Logistics and supply chain management in the construction sector is an area with great potential for improvements. Today, a lot of the workers time is spent on non-value adding activities. Research has shown that waste is a large proportion of the total production cost in building projects today.The purpose of this report is to analyze problems concerning logistics in the construction sector. Two of Skanska?s construction projects in Uppsala have been analyzed to identify problems.

Cultural relict plant species from the Nordic countries have been collected by the Nordic Genetic Resource Center (NordGen) for the purpose of conservation. To ensure high seed vitality in store, regular germination tests need to be conducted. It is important to get a correct viability status, but the knowledge of seed dormancy in the cultural relict plants is often poor. The objective of this study was to investigate how seed dormancy is affected by cold stratification. The study includes 31 accessions from 28 species with the purpose of establishing germination protocols.

Open source software has recently been discussed, not least in media as a revolution in IT. A number of advantages have been listed in changing proprietary software into open source software. Examples of such pros are no expenses for license fees and improved efficiency. In spite of this, few users have made this change. One of the reasons is a distrust of the quality in open source software.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

Detta examensarbete har haft till syfte att åskådliggöra eventuella skillnader och/eller likheter i den upplevda användbarheten vid användandet av en webbplats skapad via mobile first design och desktop first design. Målsättningen med examensarbetet har varit att ta fram en hifi-prototyp, skapad utifrån mobile first design, som visualiserade ett designförslag för flygfotoföretaget HimlaFotos startsida. Jämförelsen har utgått ifrån en egendefinierad version av begreppet användbarhet baserad på ISO:s definition, där användbarhet består av tre faktorer; kraftfullhet, effektivitet och tillfredställelse. För att samla in data om den upplevda användbarheten har användartester genomförts. Flera likheter har identifierats gällande användbarhetsmåtten kraftfullhet och effektivitet, medan skillnader har funnits vid måttet för tillfredställelse.

The evaluation of the function of the feeding of sheep herds is suggested to involve the work effort, the fulfilment of the nutrient needs of the sheep and the feed waste. Mechanisation of the feeding can be very simple or include high degrees of mechanisation. Three different farms, representing different levels of mechanisation are presented. Descriptions and analysis of the feeding systems including mechanisation, work effort and estimations of the feed waste are made on each farm. The herd with the most advanced feed mechanisation included a rolling feed band and mix wagon. The other farms were partly or little mechanised including ad lib feeding from big bales and manual distribution of hay and concentrates. The most mechanised farm was able to feed a large herd of sheep at a low work effort and little feed waste. However, the investment in machinery has to be weighed against the improved efficiency.

Every year new premises are built in Sweden, and even if they are made as energy efficient as possible, this will not reduce the energy demands, but the rate of the increase of the energy use will be reduced. One type of facility in Sweden that is a major energy user is public baths, and this makes public baths an interesting facility to study more closely. There are around 500 public baths in Sweden and about 75 % of those can be seen as older baths with large need of renovation, and they all require a high level of energy efficiency measures. To show how the energy demand increase or decrease depending on the changes chosen to be made, the simulation application IDA Indoor Climate and Energy was used. Simulations were made and compared for several cases, with two extreme cases as starting points.

Everyone has to take a greater responsibility in energy issues, both individuals and companies. There have been some major developments in the construction industry but there is still a lot to be done. This diploma work thesis presents different methods of making existing construction shed establishments to use less energy. What is possible to do and how much energy is there to be saved? A shed establishment consisting of 8 shed units were studied in this project and the building simulation tool VIP-Energy was used to simulate different types of material in the sheds. An infrared camera was used to locate thermal bridges. There are several factors that can be improved to make a construction shed establishment to use less energy.

The climate changes and the global warming have a great impact on the Arctic environments. This partially depends on that the albedo is getting lower when snow and ice is melting and exposes more and more dark surfaces of the land and sea. This leads to a feedback effect; the melting accelerates because dark surfaces attract more sun radiation. Because of the heating the glaciers in Arctic retreat. The purpose of this report is to obtain an eventual change in elevation on the glacier Lomonosovfonna that is located on Svalbard by comparing elevation data collected by NASA and GPS data from 1996-2012.

Produktivitet kan inom tillverkande industri användas som ett nyckeltal för mått på effektivitet; enkelt uttryckt hur bra man utnyttjar tillgängliga resurser för att skapa god avkastning. För att öka produktiviteten bör man identifiera och eliminera, alternativt minska risken för störningar i flödet. Bland störningar återfinns bland annat ställtid och justeringar. Genom att reducera tiden för omställning av maskinutrustning ökar tillgänglig produktionstid liksom flexibiliteten i produktsortimentet.Syftet med studien är att identifiera och belysa produktivitetshämmande företeelser och ge förslag till produktivitetshöjande åtgärder för och vid postning såväl för hela flödet vid Chemwood AB i Alvesta. Utöver närmare studie av postningsförfarandet identifierades och analyserades även andra för flödet störande företeelser.Postningsförfarandet vid Chemwood AB kan enbart normeras till den grad där grundläggande moment ingår.Tiden för postning kan reduceras genom enkla åtgärder..

Produktivitet kan inom tillverkande industri användas som ett nyckeltal för mått på effektivitet; enkelt uttryckt hur bra man utnyttjar tillgängliga resurser för att skapa god avkastning. För att öka produktiviteten bör man identifiera och eliminera, alternativt minska risken för störningar i flödet. Bland störningar återfinns bland annat ställtid och justeringar. Genom att reducera tiden för omställning av maskinutrustning ökar tillgänglig produktionstid liksom flexibiliteten i produktsortimentet.Syftet med studien är att identifiera och belysa produktivitetshämmande företeelser och ge förslag till produktivitetshöjande åtgärder för och vid postning såväl för hela flödet vid Chemwood AB i Alvesta. Utöver närmare studie av postningsförfarandet identifierades och analyserades även andra för flödet störande företeelser.Postningsförfarandet vid Chemwood AB kan enbart normeras till den grad där grundläggande moment ingår.Tiden för postning kan reduceras genom enkla åtgärder..

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

Sweden recently changed the national regulation of chimney sweeping. This study has two purposes. The first purpose is to evaluate the effect of this reform to see if the new regulation has led to an effect in terms of increased chimney fires in single-family houses and for the wood-burning and oil-burning stoves, respectively. The second purpose is an updating of a previous study (Mattsson 1994) of analysis of society´s benefits and costs of different alternative sweeping frequencies for wood-burning and oil-burning stoves. This study also has a secondary purpose to examine the extent to which the local sweeping rules vary with climate conditions.  Mattsson, based on his results, proposed that the sweeping requirements for oil-burning stoves should be reduced from twice a year to once every second year and for wood-burning stoves the sweeping should be reduced from four times to once each year.

The process of value creation is rapidly shifting from a product- and firm-centric view to personalized consumer experience today. Informed, networked, empowered and active consumers are increasingly co-creating value with the firm. The interaction between the firm and the consumer as well as the experience factor plays an increasingly important role in determining the success of a company?s offering. In this study, a special type of co-creating experience is investigated - ?omstartspex? - where the audience is interacting with actors during the play.

The aim of this study is to find a method to incorporate the energydemand of a building in the investment cost estimate.The study is based on an actual apartment block. The significant energyaspects are identified, and changed to more energy efficient options.These are then simulated using the energy calculation program VIP+.The calculated energy need is used in the investment cost estimate, andthe simulated alternatives are compared in regards to their economicalprofitability.Depending on the focus, different alternatives are the most advantageous.Since this study aims to show which alternative is the mosteconomically profitable, the annual profit is the parameter of mostimportance. This means that individual measuring of heating and hotwater use is the recommended change of the original house. A changeof the windows to new ones with a U-value of 1,0 as well as 0,8W/m2K also results in a positive change of the annual profit comparedto the original house..