This thesis describes a method of measuring axial magnetic leakage flux in an operational hydropower generator. Axial magnetic leakage flux is the magnetic flux at the ends of a rotating generator, which goes through the stator parallel to the rotor axis. This flux can cause circulating currents in the stator iron, giving rise to losses, and can in the worst case overheat a generator, causing it to melt down. To measure the axial flux, and how it affects the generator temperature, a measurement system was constructed on behalf of Vattenfall. The system consists of search coil sensors and a signal-processing unit with amplifiers and active filtering.  To confirm the behaviour of the axial leakage flux and the functionality of the measurement system, a test installation was made.

As reptiles are becoming more common as patients in veterinary clinics, there is a need for creating new procedures regarding the care of exotic pets. The aim of this study was to develop a wound care routine adapted to reptiles, which can be used independently by a veterinary nurse due to the absence of prescription drugs or surgical techniques. The study was conducted by compiling the available research regarding wound care in reptiles, as well as research from related fields. The result indicates that polyurethane films and chlorhexidine-alcohol may advantageously be used on these patients. Hydrocolloid dressings and silver sulfadiazine dressings have adverse effects on wound healing and should not be used routinely in reptiles.

To save energy it?s popular to build houses with low energy loss. In these houses the walls are keeping a lower temperature in the external side which leads to a higher relative humidity. In addition more material, such as wood studs, are used which means that there is more moisture to dry. More moisture in combination with higher relative humidity may pose a higher risk of microbial growth.

The market offers more and more products that are claimed to have medicallypositive effects (like increased blood perfusion etc.) due to their magneticproperties. The objective of this study was to investigate if blankets containingpermanent (static) magnets have a greater impact on cutaneous blood circulationthan ordinary blankets without magnets. Eight standard bred horses were used in across-over study. The cutaneous temperature was presumed to reflect blood flowin the skin and therefore thermography and local thermistors were used to indicatechanges in circulation. Baseline values were registered before the blanket wasapplied.

Establishing a reference interval for plasma fibrinogen in foals Fibrinogen concentrations were analysed in EDTA preserved blood plasma samples from 34 thoroughbred foals born in 2001 and 2002 at one stud farm. The foals were between 0 and 240 days old at the time of the sampling, and there were 19 fillies and 12 stallions in the group. The foals were examined for clinical symptoms of disease and their body temperature was measured before blood was sampled from the jugular vein. From totally 156 blood samples, 31 were selected as originating from clinically healthy foals, and used to determine a reference range for thoroughbred foals. Samples originating from foals showing clinical symptoms of disease or an abnormal body temperature at the time of sampling, were classified as coming from unhealthy animals.

This thesis has been made on behalf of Forsmarks Kraftgrupp AB and is the final part of the education of Bachelor of Engineering in ? Innovation, production and logistics atMälardalens Högskola.Forsmark nuclear power plant is located in Östhammars municipality at the coast of Uppland. The three nuclear reactors in Forsmark together produces approximately one-sixth of Sweden?s electricity consumption each year.The background of this study is that a large number of requests come to the purchasing department with incomplete information. Usually it is in the description of what is to be acquired as the information is incomplete, but also in knowing when Quality Control-functions (QC) is supposed to be used.The aim of this work is to describe and analyse the material acquisition process.

ur society is today in a phase of development in environmental and sustainable thinking. Alarming reports show changes in climate caused by our load and exhaust of resources. The energy usage contributes to a big part of it, by its emission of carbon dioxide. The built environment uses around 40 % of the total energy consumption in Sweden and requests to strongly reduce it are presented from both EU and national level.This thesis brings up the subject of green building with a focus on how we can create more energy efficient buildings in projects of new construction. Since the construction industry today often fails to pass on the knowledge between different projects, as a return of experiences, the construction company Skanska suggested the topic for this thesis.

The environmental demands are increasing when it comes to product development. EcoDesign isabout minimizing the environmental impact of a product, considering the entire life cycle of it,without compromising other qualities like function or cost. In this master of science thesis amobile phone has been analysed with Ten Golden Rules in EcoDesign regarding production, useand End of Life. Also a functional and an environmental profile were made. The goal was tomake a new concept phone, based on the previous analysis, which communicates userfriendlinessand sustainable development.

Regardless of what discipline nurses work in, wound care is one of the tasks. Caring for wounds involves early detection of signs of infection, in order to avoid complication. Wound infection extends suffering for the patient and causes unnecessary costs for society. The aim was to describe how nurses can identify infection in wounds. Method: The design of the study was a literature review, where13 scientific articles were examined and analyzed.

This thesis describes how the chip space and coolant channels are designed in today?s mills, the ideas behind the design and what is considered to be the best method of cooling. It contains ideas on how the chip space can be simplified. It contains several concepts on how the cooling could be designed for better efficiency and manufacturability. There are also suggestions on how the cooling could be stopped when the cutter isn?t cutting.

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.

In this study, the sea trout (Salmo trutta) spawning migration was studied in the river Själsöån, Gotland, to assess the main external factors determining upstream migration and seasonal changes in fish parameters. Additionally population trends were studied by examination of old data. The most important external factors for upstream migration were the air pressure, air temperature and wind direction. No significant difference was found between when males and females migrated upstream. Larger females in better condition started migration earlier than the smaller females in poorer condition.

Regardless of what discipline nurses work in, wound care is one of the tasks. Caring for wounds involves early detection of signs of infection, in order to avoid complication. Wound infection extends suffering for the patient and causes unnecessary costs for society. The aim was to describe how nurses can identify infection in wounds. Method: The design of the study was a literature review, where13 scientific articles were examined and analyzed.

In this Bachelor Thesis (20 p.), we present the history and development of "Intelligent Houses", and most important- explore some of the future possibilities in this area. The project has been carried out through an interdisciplinary cooperation between three different educations at the Blekinge Institute of Technology. By conducting a dialogue with various actors with different professions, we have been trying to identify needs within the concept of "Intelligent Houses", were the end user is not only the tenant or homeowner. Through Participatory Design methods, such as a Future Workshop, we have brought the users together to discuss their own and each others needs and hindrances in their respective work practice, and how intelligent house technology could improve their work conditions. We have also been testing a highly sophisticated CO/CO2/Moisture/Temperature/Enthalpy multi-sensor & controller, originally developed for regulating indoor climate systems.

Magnetic resonance imaging (MRI) has the potential to be used for the diagnosis and study of osteoarthrosis in the equine tarsal region. In the development of new diagnostic MRI techniques cadaver specimens are often used. To allow the use of cadaver legs for these types of studies it is important to know the effect of time after death on the MRI image. Since the relaxation times are temperature dependent, it is interesting to examine whether the time after death and the temperature of the cadaver may play a role in the image appearance and quality. The radio pulse sequences that show the different types of tissues are also important to know when pathological evaluation with MRI is used.