Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

The purpose of this thesis is to construct a marketing model to be used both theoretically and practically when working with marketing in Swedish public libraries. This objective is achieved by first making a literature review of the written works on the marketing of libraries, and then studying the marketing activities at the public library in Bollebygd, Sweden. The theory is based on the marketing mix model the 7 ps, which serves as a framework for the presentation of the empirical result and the analysis. One of the questions posed in the beginning of the paper is how the library has worked with marketing over the past ten years. Through a combination of methods observation, textual studies and interviews the marketing activities employed at Bollebygds library are noted.

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.

This thesis work contains a litterature study about electrical motors in general and how PWM-patterns for brushless DC-motors can be made. A suitable method has been implemented as a simulation model in VHDL. A simulation model of a brushless DC-motor which describes the phasecurrents, torque and angular velocity has also been made. The motor model made simulations easier for the complete PWM-system. The design was synthesised and tested with a prototypeboard including a SPARTAN II FPGA.

At the Women?s House in Örebro, a children?s project has started where the work method ?Oasen? [Oasis] model has been developed by two children?s educationists. The aim of this study is, with the ?Oasen? model as a starting point, to deepen the knowledge of (1) how to meet children?s central needs while staying at a Women?s House and (2) what the ?Oasen? model may contribute to the children. The theoretical framework consists of a cognitive approach to the progress of children experiencing domestic violence and a presentation of conceptions concerning children?s needs.

This report is the final step in the Bachelor of Science program in Building Construction Engineering, Department of Engineering Sciences, Uppsala University.The purpose of this study is to highlight the difficulties and possibilities that could involve the introduction of new energy efficient technologies and changing work around this technology. This study focuses on energy use at a construction site or other temporary workplace where so-called portacabins are in place to address the need for temporary facilities.The method for obtaining knowledge on the subject was mainly interviews with site managers working in Svevia AB's various activities. In conjunction with the interviews I visited construction sites and portacabins if it was possible.My most important suggestion to Svevia AB concerns a better organization in order to make poratacabins more efficient on energy and costs. The company should also evaluate and monitor the energy efficient portacabins that are in operation.Expected energy savings of new technology may not materialize if there are gaps in information, education, technical services and technical maintenance. It is very important to utilize the experiences of new technology.

This study is based on a statistical analysis of fundamental key ratios on the Stockholm Stock Exchange during the period 2004-2012. In total 35 financial ratios of 90 companies were tested, ultimately five ratios remained within the 5% significance level. These ratios were ROA, P/B, Total Yield, EV/EBIT and Operating Margin. A custom made investment model was created based on the purpose to achieve a risk-adjusted excess return. The results in general did not show any significant difference in return between the model's portfolio and index.

I have with this thesis sought to understand how chick lit could be useful in the classroom in the teaching of Swedish B-course in high school. Based on the model of critical literacy I am arguing that this genre would help to meet the objectives of the policy documents which, among other things, are to critically examine and analyze various types of texts.I have found that some of these texts could be used for analyzing and critically examine the ideological dimensions of texts and cultural heritage by the model of critical literacy, and also as a counterweight to the more traditional teaching of the canonical literature as a literary historical stuff that students should learn. I have also wanted to create a basis for discussions about literature in the classroom based on the chick lit genre. To do this I have, based on three themes and questions from the model of critical literacy, tried to focus on issues that might emerge from the ideological analysis and critical review. The model aims to deconstruct norms of society, and in the work of chick lit, I wanted to show how you could deconstruct norms around gender..

The aim of this study is to examine the democratization process of Kosovo in the years after the countries independence was assured. Two central questions for the case study consist of whether a democratic improvement in the country has occurred and which factors, positive and negative, are present to further improve or impede the democratizationprocess. The study builds upon two central definitions, democratic states and democratization in order to gain theoretical background to be able to measure these two quite abstract expressions. A socioeconomic model is used to measure favorable or negative developments within Kosovos society and the findings of this model confirms the hypothesis of modernization theory, namely that increased socioeconomic development increases the chance of a positive democratizationprocess. There has been a positive democratic development aswell as socioecomic progress but since the nature of this study is merely descriptive and not explanatory, it doesnt make claims on the explanatory power of modernization theory.

Title:The issue of unplanned stoppages caused by failure in medical technology equipment ? A study within the hospital of Kalmar with a focus on manage-ment, security and quality Author:Anna Förster, Ambika Linder, Sandra Nyqvist Tutor:Thomas Karlsson Institution:Linnaeus School of Business and Economics - Linnaeus University Kalmar Date:2011-01-14 Purpose:The purpose of this study was to examine unplanned stoppages caused by medical technology equipment failure in the healthcare operation within the hospital of Kalmar. Our study is based on a number of specifically selected incidents which show the consequences these disruptions cause in management, security and quality within the operation. Our intention was also to examine what role the medical technology department of the hospital plays in the care production operation during these unplanned stoppages. Method:Through a qualitative study we have generated material from a number of interviews with staff working in the hospital of Kalmar.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

The purpose of this study was to determine if and how the city district of Södra Innerstaden in Malmö, by using the Skärholms model, demand their client to reciprocate. The first problem set was to see how the demand was shown in the social service act from year 1998. From there the motives behind the introduction of the Skärholms model in city district of Södra Innerstaden were researched and also if there were a demand on reciprocity in city district of Södra Innerstaden public administration. The study was conducted in an exploratory way. The method used was to describe the idea behind Skärholms model after examining documents from the public administration.

This report is the result of an evaluation of a project, conducted by five regional libraries. Through a training course the project should inspire small and medium sized enterprises to use modern information technology and Internet when searching for information. To evaluate the project, qualitative interviews were conducted with five librarians and quantitative questionnaires were distributed to all the course participants. The evaluation shows that the project goals were met, apart from the number of course participants, which was much lower than anticipated. It also shows that the project resulted in an increase in information technology and competence at the libraries, and that the course participants profit from their increased knowledge in their daily work..

The purpose of our study is to interpret and understand the collaborative process around a regional model that is based on state developed guidelines for people with dementia. We have chosen to focus on the importance of interaction and have therefore interviewed participants in the project's steering committee. This group participates in efforts to develop a model for dementia care in Halland.The project work in Halland, to develop a joint model for people with dementia and their families was initiated in the spring of 2011 and is due to finish at the end of 2012. The Halland model has been named ?Annas led? and is about Anna and her husband Lars and living with dementia.

This pilot study examined whether treatment with Vortex Process Technology (VPT) of the irrigation water used on tomato (Solanum lycopersicum) plants had any effect on plant growth. In a block experiment, with two blocks comprising 12 vases containing 1 L water and two tomato plantlets, treatment in which, nutrient solution was based on Vortex-treated water was compared with an control using untreated water. All vases were kept in a static aerated culture system in a daylight chamber for four weeks. The results showed that the effect of the two blocks exceeded the effect of vortex treatment in terms of leaf area and weight of fresh and dry matter. Plant height, stem width and internodal length were significantly different in tomato plants grown in Vortex-processed water compared with the untreated control.