The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

An emerging trend within the construction industry is the expectation of the customer to experience and sense the product, maybe even in a customized manner. The latter trend would extend the necessity of incorporating not only function and aesthetics, but also perception and sensation. To meet this trend while at the same time improve the productivity the use of information technology such as BIM and technical platforms has increased in construction projects. Nevertheless, in spite of large investments, the construction industry has not managed to increase the effectiveness and productivity as much as other industries. Evident is that successful use of information technology depend on the integration and collaboration of various experts in a continuous and dynamic process.

The aim of this thesis is to investigate the information need of the incubators that comes from Chalmers University of Technology and are situated at Chalmers Innovation. It is also of interest to investigate how Chalmers University Library covers this information need. The investigation was carried out using qualitative interviews with representatives of the incubators. They were asked questions about the perceived need of information and which type of contacts they had with the library. The result is that the incubators feel that there is a great need for business information that is hard to find.

Purpose: The purpose of this essay is to get a comprehensive understanding for the thoughts behind Visby?s sustainable tourism planning. Focus will lie on how far Visby has come in their planning and implementing towards a sustainable tourism development. Methods: This study is preceded from a hermeneutical and constructive perspective. The methods used are induction and qualitative research in the form of deep interviews with four key figures working within Gotland?s municipality and tourism industry.

Tourism in the Arctic and Antarctic is increasing rapidly. In both Polar Regions, the cruise tourism is predominant. Several of the tour operators arrange trips under the banner of ecotourism, meaning that the trips should be ecologically sustainable. To ensure ecotourism standards there are different types of certifications; for cruise travels in the Arctic there is AECO (the Association of Arctic Expedition Cruise Operators) certification, and for travels to the Antarctic IAATO (the International Association of Antarctic Tour Operators). Promoters of ecotourism argue that these trips are important because they create support for conservation work among tourists making them ?polar ambassadors?.

This essay focuses on the technical systems and functions behind how a Roman bath operated. I will present a general view by going through each part of the waters path through the bath one by one. Since there is no such thing as a standardised Roman bath I will, under each headline, present the sub subject with a presentation of the workings and then exemplifying through archaeological findings and ancient literary sources.This essay is therefore meant to present a thorough and clear presentation of the technical aspects of a roman bath. The aim is to give the reader an understanding of how a bathhouse worked in general and why. To this I want to present problems that the Romans were faced with and how they solved them..

Hidden away in the pristine landscape on the northeast shore of the Dominican Republic, the remote village of Miches is on the verge of shifting its economic resource base from traditional fishing into what could become an international model for sustainable tourism. The aim of this thesis was to produce a vision of a waterfront park near the center of the village; demonstrating concept-based landscape design that reflects the goals of sustainable development originating from the local incentive structure. A composite landscape analysis and design concept both served to inform and guide the design work, which was executed through model building, hand drawings, and production of a visual presentation in the format of an architectural competition entry. The design concept, All invited, signifies the distinction between the development that is about to take place in Miches and the otherwise common all-inclusive resorts, where tourists are set apart from the local community and spend most of their time within the fenced-off premises of the hotel. All invited also captures the typical Dominican hospitality, and mirrors the aspirations of turning Miches into a safe and welcoming place for visitors. The result is a public park design that is equally inviting local residents as it is to tourists, and where the unique qualities of the site are emphasized without being exploited.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

In recent years, the penetration of new players on the telecom market hasdrastically increased the work pace, affecting both design and production. Inthis report the technical and economical potential of a DC/DC converterplatform is investigated, in order to shorten the time of the design process.This is done in comparison with the present discrete type designs. PowerIntegrations offers a product, the DPA-Switch?, enabling this.By developing a wide DC/DC converter platform based on the DPA-Switch?,many advantages are gained. The component count is decreased by up to48 % and the yield increases by up to 2.9 % which in all yields a costreduction by up to 43 % or ?390 000 for 100 000 manufactured units.