In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

Syftet är att få samt skapa förståelse för hur en kommun resonerar inför införskaffandet av tekniska hjälpmedel. Köpbeslutsprocessen för B2B utgör den teoretiska grunden. En kvalitativ undersökning i form av semistrukturerade telefonintervjuer genomfördes och totalt intervjuades elva respondenter. Slutsatsen är att på nämnd- och tjänstemannanivå finns ett tydligt intresse för ny teknik. Fördröjande faktorer för implementeringen av tekniska hjälpmedel är snarare personalens skepsis och ej anpassade förhandlingsdirektiv.

This report describes an investigation of the indoor climate in two different workspaces. Since we a big part of our lives are staying indoors in artificial environments, and more particularly in our workplaces, we think it would be interesting to do this investigation. The technical solutions for air treatment systems began with simple natural systems without fans and where the thermal rise of the air applied. In modern time is technical air treating systems used to take care of the fresh air supply. This type of units can supply filtered air with the right temperature to the building. Well-functioning ventilation is essential to bring clean fresh air to the room and effectively remove impurities without sound- or draught problems. The indoor climate is relevant for the output capacity.

This rapport is result of a project. The purpose of which was to design a circuit that is used in a heat glove. The heat glove is the technical aid which provides heat inside a glove.It is specially suited for old people who have problems with cold hands because of decreased blood circulation.There already was an old circuit in the glove that gives a constant current which develops heat from battery to glove through a circuit. The temperature is between 32 and 34 degrees.The problem with the existing circuit was to regulate the temperature. There is only on/off switch and there is no way to adjust desirable value of the temperature.In order to solve the problem the old circuit was investigated.

The aim of this study is to analyze how intercommunication between offenders are presented with artefacts during the planning and implementation of a robbery in a cash depot in Stockholm. The methodological approach is based on empiricism from police investigation protocols, which leads this study to a case study. The ambition is to analyze the empirical material from a sociocultural perspective. The results shows that the offenders use artefacts to plan the crime with artefacts within an internal intercommunication between the offenders. After the planning artefacts such as a helicopter, explosive material, telephones, saws and ladders have been used in an intercommunication to implement the robbery which leads to an analysis that hierarchy depends on the role of the artefacts, only when technical artefacts are included in the term of hierarchy..

In this paper we analyze a social network specifically designed for the elderly, people with Dementia and people with generally low computer experience. This is a relatively unexplored use for such software, and our goal is to find out whether the technique to be used is simple enough to use for the intended user group, and generally how the whole situation is experienced by the users. To achieve this we conducted an expert evaluation and interviewed a number of users at two separate occasions during their first weeks with Modernfamilies. We came to the conclusion that this software generally is simple enough to use for the intended target group. Some of the users we came in contact with experienced the software as a positive addition to their daily lives, while some could not see any reason for a further use.

An airline company that operates with its fleet needs to ensure that maintenance of a following and certain standard will be implemented. In this project we have sorted and divided the various working procedures of Malmö Aviation into Work Packs. These procedures are mandatory and must therefore be implemented in order to keep the aircraft airworthy at any time. Our task was to optimize and sort these working procedures by zone, panels, access and down time. We have created a maintenance program which Malmö Aviation can use and we have sorted their working procedures in B and C- Checks.Maintenance procedures that did not fit into our Work Packs have been gathered and sent back to Malmö Aviation for further inspection.This project has required a lot of extra reading in manuals and we have had a great insight into the complexity of a technical organization such as Malmö Aviation..

When a helicopter is flying, the dynamics vary depending on, for example, speed and position. Hence, a time-invariant linear model cannot describe its properties under all flight conditions. It is therefore desirable to update the linear helicopter model continuously during the flight. In this thesis, two different recursive estimation methods are presented, LMS (Least Mean Square) and adaptation with a Kalman filter. The main purpose of the system estimation is to get a model which can be used for feedback control.

Trust is a concept used throughout our daily lives. We give trust to friends, colleagues and strangers. We also give trust to the technical artifacts we use in our everyday lives. We must also rely on the services we use to work the way we expect them to. There is plenty of research on trust in e-commerce and online banking on website based platforms.

A group of two people, Jelena Durkan and Johan von Heideken, have worked together on an assignment from the company August Lundh AB. The company manufactures plastic products for all sizes of catering establishments. The basis for this thesis is a pre-study which shows that many of the users would be more drawn to the plates that the company manufactures, if there was a motif on the plates.This thesis will present the method of application for the motif that best benefits the company, with regard to the requirements placed on the motif, application method and the costs. The group found five relevant methods that were more carefully examined and compared to each other. Those are:Laser engraving, Hot-stamping, Injection molding, In-mould labeling and Pad-printing.The tools that have been used to solve this problem are: Requirement specification, QFD and OEE.

As reptiles are becoming more common as patients in veterinary clinics, there is a need for creating new procedures regarding the care of exotic pets. The aim of this study was to develop a wound care routine adapted to reptiles, which can be used independently by a veterinary nurse due to the absence of prescription drugs or surgical techniques. The study was conducted by compiling the available research regarding wound care in reptiles, as well as research from related fields. The result indicates that polyurethane films and chlorhexidine-alcohol may advantageously be used on these patients. Hydrocolloid dressings and silver sulfadiazine dressings have adverse effects on wound healing and should not be used routinely in reptiles.

In nature there are about 4,500 minerals identified. These can roughly be divided into two groups, opaque phases and non-opaque phases, with the exception that some opaque phases also may act as a non-opaque phase in different circumstances. The division is made on the basis of the optical properties. Opaque phases are nontransparent, which means that a different type of microscope must be used. A conventional microscope uses transmitted light while the microscope for opaque phases or the ore microscope uses reflected light.

Working with a three-dimensional shape that adjusts light seemed exciting. Venetian blinds became a basis and source of inspiration in my project. What is a Venetian blind? I arrived at the de?nition ?a surface of angleble pieces for sun adjustment?. From that simpli?ed meaning I started making sketches of what an alternative model could look like.

This thesis has been written with our society?s current energy-situation in mind.Although it only deals with one particular block of buildings, the solutions and suggestions presented herein are quite applicable on other objects of the same type.This thesis is intended to be used as a guideline for energy-preserving projects in general, with an eye to buildings erected during the Swedish ?million-programme? in the sixties and seventies.The paper starts with the acquiring of all necessary blueprints and technical specifications. It then moves on to a thorough description of the buildings in question, and their heating- and ventilation-systems.Followed by this the reader is guided through the successive stages of energy-perseverance measures that are available, and possible. Reasoning around the economic factors concerning all measures is also held.The paper ends with conclusion, and a discussion concerning the delicate issue of the higher return-temperatures possibly reaching the district-heating plant..

Rapporten behandlar upprättandet av rollbeskrivningar för STOMT-T, SAS Technical Services avdelning för planering av ?Line Maintenance? (underhåll som utförs under nattstopp, för att erhålla flygvärdighet).Arbetet syftar till att effektivisera verksamheten inom STOMT-T. Rollbeskrivningarna är även tilltänkta som hjälpmedel då ett nytt datasystem tas i bruk.Under arbetets gång har intervjuer med personalen på STOMT-T genomförts. Materialet har sedan analyserats i samarbete med ledningen och legat som grund för framtagna rollbeskrivningar.Arbetet resulterade i upprättade befattningsbeskrivningar för samtliga roller inom STOMT-T. För att möjliggöra mätning av effektivitet och prestation har nyckeltal inkluderats.