The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

An emerging trend within the construction industry is the expectation of the customer to experience and sense the product, maybe even in a customized manner. The latter trend would extend the necessity of incorporating not only function and aesthetics, but also perception and sensation. To meet this trend while at the same time improve the productivity the use of information technology such as BIM and technical platforms has increased in construction projects. Nevertheless, in spite of large investments, the construction industry has not managed to increase the effectiveness and productivity as much as other industries. Evident is that successful use of information technology depend on the integration and collaboration of various experts in a continuous and dynamic process.

The aim of this thesis is to investigate the information need of the incubators that comes from Chalmers University of Technology and are situated at Chalmers Innovation. It is also of interest to investigate how Chalmers University Library covers this information need. The investigation was carried out using qualitative interviews with representatives of the incubators. They were asked questions about the perceived need of information and which type of contacts they had with the library. The result is that the incubators feel that there is a great need for business information that is hard to find.

In recent time, agile methods have been devoted much attention, and the concept is widely used in the IT industry in particular. An increasing number of companies are interested in this way of working. The following report is the result of a study on the ability to create value for customers in business development through the use of agile methods. We ask what the advantages and limitations of agile methods are in the creation of customer value. Grounded Theory and an initial literature review was used to answer this question.

This essay focuses on the technical systems and functions behind how a Roman bath operated. I will present a general view by going through each part of the waters path through the bath one by one. Since there is no such thing as a standardised Roman bath I will, under each headline, present the sub subject with a presentation of the workings and then exemplifying through archaeological findings and ancient literary sources.This essay is therefore meant to present a thorough and clear presentation of the technical aspects of a roman bath. The aim is to give the reader an understanding of how a bathhouse worked in general and why. To this I want to present problems that the Romans were faced with and how they solved them..

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

This master thesis was performed at IdaInfront AB. The aim of the thesis was toinvestigate how the design principles ofthe user interface in Windows 8 can beapplied to a case management system. Theuser interface in Windows 8 is based ona design language called Metro and it isprimarily designed for touch screens.Ida Infront AB wanted to know whatpossibilities and limitations the Metrointerface offers.The study has resulted in a prototypeapplication that is developed in Windows8. The prototype shows how the Metrointerface can be applied on a casemanagement system. Some limitations inthe usability have been identified inthe Metro interface when applied to acase management system.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

In recent years, the penetration of new players on the telecom market hasdrastically increased the work pace, affecting both design and production. Inthis report the technical and economical potential of a DC/DC converterplatform is investigated, in order to shorten the time of the design process.This is done in comparison with the present discrete type designs. PowerIntegrations offers a product, the DPA-Switch?, enabling this.By developing a wide DC/DC converter platform based on the DPA-Switch?,many advantages are gained. The component count is decreased by up to48 % and the yield increases by up to 2.9 % which in all yields a costreduction by up to 43 % or ?390 000 for 100 000 manufactured units.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.