The purpose of this paper is to increase knowledge and understanding of how an identity is constructed on the internet and if it is different from the everyday identity. To analyze this, I have studied the theories of how identity is constructed in everyday life and then applied this on the empirical data that I have collected. In this study, I have chosen to pursue a qualitative approach using semi-structured interviews to gather the empirical data. In the study, six informants participated and all of them has an active social life both on and off the internet. The results that I have found in this study shows that an identity online is constructed in a similar way as it does in real life, however, some limitations that exist in everyday life do not exist online.

This report describes an investigation of the indoor climate in two different workspaces. Since we a big part of our lives are staying indoors in artificial environments, and more particularly in our workplaces, we think it would be interesting to do this investigation. The technical solutions for air treatment systems began with simple natural systems without fans and where the thermal rise of the air applied. In modern time is technical air treating systems used to take care of the fresh air supply. This type of units can supply filtered air with the right temperature to the building. Well-functioning ventilation is essential to bring clean fresh air to the room and effectively remove impurities without sound- or draught problems. The indoor climate is relevant for the output capacity.

This rapport is result of a project. The purpose of which was to design a circuit that is used in a heat glove. The heat glove is the technical aid which provides heat inside a glove.It is specially suited for old people who have problems with cold hands because of decreased blood circulation.There already was an old circuit in the glove that gives a constant current which develops heat from battery to glove through a circuit. The temperature is between 32 and 34 degrees.The problem with the existing circuit was to regulate the temperature. There is only on/off switch and there is no way to adjust desirable value of the temperature.In order to solve the problem the old circuit was investigated.

In this paper we analyze a social network specifically designed for the elderly, people with Dementia and people with generally low computer experience. This is a relatively unexplored use for such software, and our goal is to find out whether the technique to be used is simple enough to use for the intended user group, and generally how the whole situation is experienced by the users. To achieve this we conducted an expert evaluation and interviewed a number of users at two separate occasions during their first weeks with Modernfamilies. We came to the conclusion that this software generally is simple enough to use for the intended target group. Some of the users we came in contact with experienced the software as a positive addition to their daily lives, while some could not see any reason for a further use.

The aim of this study is to analyze how intercommunication between offenders are presented with artefacts during the planning and implementation of a robbery in a cash depot in Stockholm. The methodological approach is based on empiricism from police investigation protocols, which leads this study to a case study. The ambition is to analyze the empirical material from a sociocultural perspective. The results shows that the offenders use artefacts to plan the crime with artefacts within an internal intercommunication between the offenders. After the planning artefacts such as a helicopter, explosive material, telephones, saws and ladders have been used in an intercommunication to implement the robbery which leads to an analysis that hierarchy depends on the role of the artefacts, only when technical artefacts are included in the term of hierarchy..

An airline company that operates with its fleet needs to ensure that maintenance of a following and certain standard will be implemented. In this project we have sorted and divided the various working procedures of Malmö Aviation into Work Packs. These procedures are mandatory and must therefore be implemented in order to keep the aircraft airworthy at any time. Our task was to optimize and sort these working procedures by zone, panels, access and down time. We have created a maintenance program which Malmö Aviation can use and we have sorted their working procedures in B and C- Checks.Maintenance procedures that did not fit into our Work Packs have been gathered and sent back to Malmö Aviation for further inspection.This project has required a lot of extra reading in manuals and we have had a great insight into the complexity of a technical organization such as Malmö Aviation..

Trust is a concept used throughout our daily lives. We give trust to friends, colleagues and strangers. We also give trust to the technical artifacts we use in our everyday lives. We must also rely on the services we use to work the way we expect them to. There is plenty of research on trust in e-commerce and online banking on website based platforms.

The term maneuver warfare is frequently used in western defense doctrines and theoreticaltextbooks. The ambition of the Swedish armed forces is to attempt maneuver warfare in allappropriate situations. Theories and doctrines indicate the importance of decentralized command and control systems. Mission command (Auftragstaktik) is one such system and should be applied to all situations of the Swedish Armed Forces. There are theoretical and doctrinal bases for warfare and command, but in practice, what are the preconditions for this? Previous research addresses many theoretical questions but there are flaws in existing studies investigating practical realities.The purpose of this study has been to reach a deeper understanding of armed forces ability to maneuver warfare by analyzing conformity of command and leadership perspectives in practice.This is an interview-based qualitative case study in which respondent´s statements were analyzed and interpreted in relation to a theoretical framework.

A group of two people, Jelena Durkan and Johan von Heideken, have worked together on an assignment from the company August Lundh AB. The company manufactures plastic products for all sizes of catering establishments. The basis for this thesis is a pre-study which shows that many of the users would be more drawn to the plates that the company manufactures, if there was a motif on the plates.This thesis will present the method of application for the motif that best benefits the company, with regard to the requirements placed on the motif, application method and the costs. The group found five relevant methods that were more carefully examined and compared to each other. Those are:Laser engraving, Hot-stamping, Injection molding, In-mould labeling and Pad-printing.The tools that have been used to solve this problem are: Requirement specification, QFD and OEE.

Working with a three-dimensional shape that adjusts light seemed exciting. Venetian blinds became a basis and source of inspiration in my project. What is a Venetian blind? I arrived at the de?nition ?a surface of angleble pieces for sun adjustment?. From that simpli?ed meaning I started making sketches of what an alternative model could look like.

This thesis has been written with our society?s current energy-situation in mind.Although it only deals with one particular block of buildings, the solutions and suggestions presented herein are quite applicable on other objects of the same type.This thesis is intended to be used as a guideline for energy-preserving projects in general, with an eye to buildings erected during the Swedish ?million-programme? in the sixties and seventies.The paper starts with the acquiring of all necessary blueprints and technical specifications. It then moves on to a thorough description of the buildings in question, and their heating- and ventilation-systems.Followed by this the reader is guided through the successive stages of energy-perseverance measures that are available, and possible. Reasoning around the economic factors concerning all measures is also held.The paper ends with conclusion, and a discussion concerning the delicate issue of the higher return-temperatures possibly reaching the district-heating plant..

The purpose of this degree project is to come up with a new package to Renat Brännvin for »Vin & SpritAB« and make the product more attractive on the market of bars, restaurants and hotels. The commissionhas included to decide the material of the package, whether it´s possible to manufacture the productand to make an estimation of the costs.The conditions that »Vin & Sprit AB« set up was to make the product attractive to a younger targetgroup, in this case people from 20 to 40 years old. As Renat Brännvin is considered to be a product of firstclass it´s of great importance that the package reflects the look of a premium product.At first we looked at the history of the company »Vin & Sprit AB« and Renat Brännvin. We decidedthat the package schould consist of a bottle, glasses and a device used when serving the liquor. To getinspiration before sketching we studied different kinds of bottles, glasses and serving devices.

In this essay I reflect on what makes a good preschool teacher today. I discuss the importance of education, the importance of experience and practical knowledge, but also the importance of capacity for self-reflection and listening. I bring up examples from my workplace, where some think more about their limitations than on what and how much they actually can. Others are more satisfied by what they can and see less of their limits. Some are also lack of the will to see differently and to do changes.

Rapporten behandlar upprättandet av rollbeskrivningar för STOMT-T, SAS Technical Services avdelning för planering av ?Line Maintenance? (underhåll som utförs under nattstopp, för att erhålla flygvärdighet).Arbetet syftar till att effektivisera verksamheten inom STOMT-T. Rollbeskrivningarna är även tilltänkta som hjälpmedel då ett nytt datasystem tas i bruk.Under arbetets gång har intervjuer med personalen på STOMT-T genomförts. Materialet har sedan analyserats i samarbete med ledningen och legat som grund för framtagna rollbeskrivningar.Arbetet resulterade i upprättade befattningsbeskrivningar för samtliga roller inom STOMT-T. För att möjliggöra mätning av effektivitet och prestation har nyckeltal inkluderats.

 Inner resistanceThe aim of this study was to investigate the existence of an internal resistance to a work-related change in people who are long-term sick, and if this is related to an identification as ?long-term sick?. A second purpose to the study was to research in which way this internal resistance to a work-related change manifests and point to possible solutions. A qualitative study was conducted with interviews of experts and people on sick leave to illuminate the subject. The main result was divided into interviewed groups.