Technology has grown rapidly in recent years. At present, almost all social interaction are through computers and telephones. It is, however, not everyone who can manage these media. This applies mostly to elderly people who have not kept pace with technological developments. A major contributing reason is that the manuals are usually bulky and too technical for this group.The purpose of this paper is to develop a concept/prototype into a product that will facilitate the use of mobile phones for seniors.

The expansion of the Swedish hydro power has contributed positively to the reduction of the environmental impacts from the fossil fueled power production. In the same time the extensive expansion has been proved to cause negative ecological and local environment impacts of a stream. This, in turn, has been affecting the biodiversity and fish stock negatively, which has been reduced. One of the underlying problems is the lack of possibility for the fish to pass the plants, but it is also directly correlated to the mortality rate of the fish passing through the turbine, which this study is investigating.The mortality rate has been computed for three different locations in Sweden, Untra, Tännfallet and a third one whose location is confidential, and is denoted as Case 1, 2 and 3. The model used to calculate the mortality rate in this investigation is based by existing blade strike models and knowledge and are investigating the death due to mechanical injuries from collision with a runner blade in the turbine.

AbstractThis report is made in cooperation with the municipality of Vasteras and technical committeestaff. The report addresses several topics that affect fuel stations in Vasteras. The reportcontains two parts, first is a inventory that review all stations in the area to be addressed. Theinventory is made with consideration to various things that geographic situation, whatcompanies are represented and what level of service stations have. And the second part of thereport, is done with the analysis of how it looks in daily situations review.

In this essay I have examined how teenager and leaders handle conflicts on a recreation centre in Nacka, outside of Stockholm in Sweden.I have made qualitative interviews with two leaders and ten teeangers. Also I have read researchlitterature about conflicts and how to handle them. Then I have made observations watching how leaders and teeangers communicate and behave.The purpose of the examination is to describe differences with constructive and destructive handle with conflicts. I have also shown how conflicts can give possibilites for the involved people to get to understand themselves, the other parts and the whole complex social behavior better.But that demands that the involved people choose a constructive solution where both parts cooperate, understand eachother and can see how themselves have contributed in developing the conflict.I have worked as an employee at the recreation centre two evenings a week in sex months. During that time I have observed conflicts and different strategies among teeangers and leaders.My conclusions are that conflicts give opportunities for people to grow as human-beeings and get a mentally richer life.

The objective of this thesis is to examine which form value-adding qualities specific for the Web take and to what extent they exist in a selection of electronic scholarly editions of literary works. The examination was concentrated on the qualities hypertextuality, interactivity and hypermediality. Besides extent and form, the research questions focused on whether or not the form of the editions correspond to theories and guidelines about how electronic scholarly editions should be designed to generate an added value from a scholarly point of view. The empirical approach was qualitative and the selection consisted of 31 editions. They were examined according to theories about the value-adding features of the qualities.

This thesis is covering my design of an architectural object for the use in a pedagogical setting. The purpose is to create contextual premises for students, making possible the testing of designs, involving plants suitable for the urban environment. Hence, the main features in the object design is suggestive to the urban outdoor rooms - rooms that are formed amongst the city facades. The thesis is also about the design process set out from a technical reality, based on camera imagery. To a large extent, the thesis consists of reflections concerning the object's function towards pedagogy, perception and materials. Furthermore, the object claims to be a hybrid between architecture and landscape architecture.

Non-attendance and cancellations within dental care is a problem resulting in both financial and time consuming losses. The purpose of this questionnaire was to investigate different factors influencing non-attendance and cancellations. Six public and private dental clinics located in Skåne participated. Information about the clinics and patient-related factors were collected. Result: Totally 182 patients cancelling or not attending their appointment were registered.

This is a technical report about cement stabilization in general and the stabilizationprocess during the construction of a warehouse in Halmstad, Sweden in particular and iswritten at the section for economy and technology at Halmstad University incollaboration with NCC Anläggning.NCC encountered variations in compression strength in the stabilized material on the firstwarehouse that they constructed for the company Biltema. In our report we used thestabilization process of the second warehouse for the same company as a reference todetermine what could be done to get a more homogeneous result for future projects.We also looked in to what testing method is the most suitable to determine the result ofthe stabilization.After interviews with people involved in the process and visits on the work site we havecome to the conclusion that the most probable cause to the variations in compressionstrength is segregation in the ballast material. This segregation can occur in severaldifferent occasions in the process such as during the production, transportation andhandling on the work site.Other causes for the variation can be improper compaction, overlapping stabilization insome places and different duration of hardening of the samples that are tested.The best way to do in situ test of the stabilized material is to do seismic investigations asthose are non-destructive tests in comparison to taking core samples and you can discoverany cracks or air bubbles in the material..

Ådalen 1931 - Göteborg 2001, A comparison of two incidetns that upsett Sweden. An essay about how the press in Norrbotten wrote about the incidents in Ådalen 1931 and Göteborg 2001. The main questions are: Is there any parrallells in how the swedish state acted? Is there any parrallells in how the press acted? In what way have the state and the press acted different 2001 compared to 1931? What does eventual differences in their actions depend on? The so called biträdesteorin is used to answer theese questions. The essay includes three big newspapers in Norrbotten: Norrbottens Kuriren, Norrländska socialdemokraten and Norrskensflamman.

Syftet med det här examensarbetet var att undersöka 3-5 åringars förmåga att utveckla sin förståelse för vattnets väg till kranen genom med en pedagogisk aktivitet. Genom den pedagogiska aktiviteten gavs barnen möjlighet att färdas genom vattensystemet med sina kroppar och sinnen, från sjön till kranen. För att kartlägga hur barnens förståelse utvecklats genomfördes kvalitativa intervjuer före och efter den pedagogiska aktiviteten.Jämförelsen mellan resultaten av förintervjuerna och uppföljningsintervjuerna pekar på en tydlig utveckling av barnens förståelse av vattnets väg till kranen, som ett tekniskt system. Flera av barnen utvecklade sin förståelse för att vårt hushållsvatten måste genomgå en reningsprocess, färdas genom olika komponenter i vattensystemet och rör innan det slutligen når kranen och kan förtäras..

Background: Relationships are really important for companies in order to becompetitive today and in these relationships is it important to feel trust to the other companies. There is therefore necessary to find out how companies work to create trust between themselves and their customers.Purpose: The purpose of this report is to examine and explain how staffing companies work to build trust in their relationships with B2B clients through examination of the conceptual model, creating a theoretical contribution.Research question: How do recruiters at staffing companies work to create trust between themselves and the customer?Methodology: The study adopted a quality research method with a deductive approach where the focus wasg on describing and analyzing. The data was collected primarily through semi-­?structured interviews.Research findings: Through the study?s interviews and their results is it possible to see that staffing companies in Växjö is working with trust.

When the emissions from the diesel trucks today accounts for a large part of the total emissions from the road traffic, the trend with a more extensive use of diesel trucks for transportation will therefore lead to increasing carbondioxide emissions to the atmosphere. Because of the fact that technical progress in the form of optimized engines and shifts in the means of transport sometimes result in even greater emission levels, other solutions to this problem must be studied to decrease the emissions of carbondioxide from the diesel trucks. The purpose of the thesis is to show how a decrease of the carbondioxide emissions from diesel trucks in Sweden can be achieved in a costeffective way by the use of a carbondioxide tax and a differentiated vehicle tax. The method used in order to fullfill the purpose of the thesis is studies of literature, mainly of public government reports. Literature of enviromental economics will be used to show the need of a tax and how to determine the dynamic effective carbondioxide tax in steady-state.

Customers put their printing suppliers to severe claims for shorter production time and faster deliveries.Printers always look for new solutions to increase the satisfaction of their customers. Oneexample of such a solution is web to print, where the customers book their printed matters atInternet.The solution involves design of printed matter by using templates that are made unique for thecustomer's printed matter. Web to print is suitable for reiterated printed matters. By using templatesthe customer doesn´t have to redo their layout for every new edition. Bromma tryck AB hasinvested the system CiPublisher, which is applied for the customer to make their printed matter atInternet.The purpose of the examination work is to investigate the needs of the customers of Brommatryck for a web to print solution and how such a system should be adapted.The result shows that the customer who is in need of a web to print solution wish such a system tobe easy managed and also usable.

A new site- and construction-law came into effect in May 2011. The new law, PBL2010:900 implies several different changes of the law. These changes concern bothconstructors, people working in municipality and county councils and other peoplethat in some way are related to the building sector. Except from the change in orderof the chapters and the renewed and modernized language, the law has now beenextended with a few new phases.According to the new law a certificate has to be issued to start and finish theconstruction; the construction consulting has changed name into technical consultingand the protocol for the controls has to show what the control is being compared to.This diploma work concerns control visits on construction sites as related to the newlaw. The reason why visits on construction sites are now implemented in the law isbecause the government saw a lack of trustworthiness in the old law.

To introduce a standardized component assortment takes a lot of effort in order to make real cost savings. The rationalization effect itself is important, but perhaps even more important is to state the aim of the standardization efforts in a well-defined way. How can an organization assure that they are working in a proper way? How do they know that their efforts are being interpreted into the whole organization? And, how do they know that the standardization efforts actually save money? Different components differ heavily e.g. in technical complexity and quality issues.