SJ is a government-owned passenger train operator in Sweden. SJ currently uses asystem called Ford for control and monitoring of maintenance. Technical andorganizational factors have given Ford the character of a monolithic system withoutflexibility and conditions to meet SJ's increased requirements.The main purpose of this master's thesis is to investigate how data quality can bedefined at SJ and to examine the data quality in Ford. This will give SJ an indication ofwhat their quality efforts should focus on in the future.The technical data quality parameters found are: accuracy, timeliness, completenessand consistency. The user centred data quality parameters are: accessibility,understandability and reliability.

For an outdoor environment to function optimally as a playarea requires that it is flexible, that is, contains places and elements that give room for the imagination and for own interpetretations, and also that the children in some way can influence and change their surroundings. It is also important to have variety, both in the sense that the playground has a unique character that distinguishes it from other places, and that it allows many different games and activities. There should for example be room for both wild games of running and moving around where many children can participate, and calm corners to withdraw to for rest or quiet play. A good playground should surprise, challenge and encourage children to discover their surroundings. One way to achive this is to use plants and materials from nature, whose irregular forms and structures can become interesting elements to explore. Vegetation also gives sence-experiences of various kinds, materials like twigs and leafs to play with and a place to play house.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

AbstractStudents at Mälardalen University have long performed their lab on a small turbojet engine in the course Aircraft Engine Technology. Since 2011, the engine has been dysfunctional. This was due to lack of maintenance. Since the lab has been an important element in teaching, the University had decided to get the engine functional again. This thesis project has been a request of Mälardalen University.The task we were assigned to was:1.

The report describes a measuring method for analysis of energy consumption measurement in microwave ovens. Concurrently that the awareness of the environment evolves the demands are growing for more power saving products. This is also counting within the Home Appliance business, which is Whirlpools business area. Whirlpool is therefore interested of launching microwave ovens with documented low power consumption. To be able to implement this, both asserted measuring equipment, that fulfils all demands, and a standard procedure is required.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

To be a part of the future we have to make a profit, one way to improve the profit margin is by reducing the fixed costs. This paper discusses the financial results of equipment cooperatives in crop production. Through a case study of three farms in Södermanland, we have an example of how it can look today and how it could look tomorrow. The three farms are crop-producing farms with slightly different orientation. Jursta Gård, 155 hectares, and Djursnäs Säteri, 215 hectares, have grains crop and oilseed crops as the main crops, and Nibble Gård, 340 hectares, mostly have pasturelands and some grain crops.

The purpose of this thesis is to investigate if there are environments that use some kind of central authentication system within institutions/schools. The hypothesis is that an institution not using a form of central authentication service has more need for maintenance and as such is considered a higher cost for the organization. The gathering of data has been done through interviews with technical personal at Blekinge Tekniska Högskola and Linköpings Universitet. Based on the technical background of the authors, and the system limited to discussing Windows and UNIX operating systems, a discussion and analysis of the systems working today has been done, with emphasize on the hypothesis..

The study took place at a food corporation in Växjö, Sweden. It describes a building that contains four tanks in which glucose syrup is stored. The purpose of the study was to calculate the amount of heat that leaves the building and the amount of heat that is supplied by the installed heating equipment. Before the calculations could be implemented, all the systems that supply the building with heat had to be examined. With a small amount of information from earlier studies, the work to gather all the data necessary for the calculations began.

As the final course in the education ?University Diploma Programme for Process Operators? there is a thesis in cooperation with a company required.This thesis is about operator maintenance and 5S made at Metsä Board in Husum.In this report you can read my opinions and conclusions based on literature studies and the interviews that have been made with the staff at PM6 (the paper machine).I chose to focus on the theory of lean, 5S and operator maintenance because it covers the area of this thesis.The operators shall do their rounds to make sure that the equipment works fine. They shall also write down things that they notice in a checklist. This is not done as it should be and the question is: can this be solved by using 5S?My conclusion of this thesis are:Better review of the task so that everyone is involved.

This thesis is   focused on identifying and documenting all   electrical equipment, such as devices, power lines / cables, and connectors in the facility and also on presenting a brief   technical description and information of the systems around the reactors.   Furthermore there will be a brief description of LabVIEW - which is a   graphical programming language- and which devices / elements   are programmed. For further notification, I am not   responsible for the programming of the devices in LabVIEW   which I have only used as a tool in my work. The plant   for production of biogas consists of four reactors   of which the third reactor (Lakbädden)   is connected to another reactor (UASB)   where they cooperate with each other.   The reactors are used for producing   biogas in the form of methane gas.The reactors I and II are   connected to, various electrical devices as, flow meters, temperature   sensors, frequency converter and   more.

The purpose of this study is to show the technical building requirements for modern arenas inSweden. The study will also create an understanding of how the requirements affect theSwedish football arenas which are affected by the regulations valid from 2014. As one of theSwedish football arenas there is Örjans Vall located in Halmstad. The aim of this study is todevelop alternative solutions regarding the technical problems Örjans Vall is facing 2014,when the new arena requirements for ?Svensk elitfotboll? are taken into use.

A recent trend in the technological evolution has been to increase the mobility of the end-user. A contributing factor is the fast rate of improvement in the smartphone area. This, in turn, has changed the expectations end-users have on the availability of services, which has allowed mobile applications, apps, to find their place in everyday life.This study has been conducted at Scania?s Fleet Management department that offers a web-based service where haulage contractors can administer, monitor and follow up on their vehicle fleets. The purpose of this study was to investigate if Scania?s existing web service should be extended into the mobile area, and if so, what organizational and technical challenges app development imposes.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.