At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

This thesis project has been written and accomplished in cooperation with HABO AB. The objective of the project was to develop a standard stated packaging system. The background to this is that HABO is not pleased with the system currently in use. The system which HABO is currently using consists of to many sizes. The largest benefit of a standard stated system is that it becomes much easier to organize the packaging with the aid of a computer program.

The background to this paper is the events that have taken place in the Swedish area of responsibility in Afghanistan where Swedish troops have been ambushed by the insurgents. Although the troops primarily where riding in Toyota Land Cruisers they had no casualties. I think that the Swedish force needs other vehicles that can be armed and are armoured.When I compared three different types of armoured vehicles, I found that PTGB 6 is the vehicle of choice, according to the special needs that a Swedish EOD-squad, their task and their equipment have. .

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

Understanding how innovation and renewal occurs in an industry is important for how to manage technical development for individual companies. It is also important for creating a beneficial industrial context for renewal, from both a political and an industrial perspective, in which new solutions can arise and spread through the involvement of several actors of the industry. How innovation and renewal occurs in the construction industry in Sweden is however viewed differently. One challenge that has been pointed to is that most of the work performed in the construction industry is organized in projects, which in turn should affect how innovation and renewal can be achieved. The aim of this thesis is to provide an understanding of how the project organizing in the industry affects innovation and renewal. This is executed through a case study of the construction of Skandionkliniken, a proton therapy clinic, and by using an industrial network theory that challenges the traditional view of how innovation is achieved.

The construction industry works today with a time limit, therefore it is important to have rational tools to improve the efficiency in the building process. That?s the reason for this report, where a standard for interior finishes has been developed for Sandvik. The standard for interior finishes is designed as a program for room functions and includes office space and sanitary areas. It is a proposal showing how Sandvik can design their premises in the future.

At Volvo Construction Equipment outside Eskilstuna a wide range of heavy equipment machines are developed that are used by a variety of industries worldwide. For the handling and maintenance of these machines a deep knowledge is often required. Volvo CE and their dealer Swecon offer courses for both drivers and technicians that last for 1-2 weeks. Out on the workplaces however, the knowledge from these courses need to be supplemented with information from the machine?s operator and repair manuals.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This paper is based on a literature review and interviews made with managers in small-scale nurseries for pot plant production. The review helped to identify the worst occupational hazards in pot plant production. The interviews provided a way to investigate how the nurseries act so as to avoid the worst hazards and what they do to even out work intensive periods during the season in order to get a more even distribution of work over the year. According to available statistics problems with back and shoulders are the most common of the physical disorders and the risk for occupational accidents are high for greenhouse workers. Most of the occupational injuries are connected to musculoskeletal problems. The handling of material is often manual and involves frequent lifting and carrying of heavy loads, the strenuous work postures and static muscular tensions these repetitive tasks are associated with causes straining and overloading.

This study focuses on a specific organization of a Security Operations Center (SOC) as a case studyto first identify specific challenges related to the work process, preceding with identifying whichprinciples from various process models, such as agile and traditional methodologies from softwaredevelopment companies, can be implemented. Initially, the study presents relevant research on agile and traditional process models as well asresearch on SOC. Subsequently, six semi-structured interviews are planned and conducted withemployees within a specific SOC-type organization to identify the current work process and thechallenges affecting the organization?s work process. The results of this study indicate a description of the current work process in the organization aswell as a variety of challenges related to technical and organizational issues.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

The study aims to investigate the feasibility of small-scale electricity production with solar electricity systems, also known as PV (photovoltaic) systems, in Australia. Due to the global warming, sustainable energy has in recent years become an increasingly important issue, both internationally and in Australia. With one of the largest dependencies on fossil energy sources in the world, the country's abundant solar radiation is a possible solution to this issue.Both the technical and the economic feasibility of small-scale PV systems were investigated. On the technological side, the electricity generation, distribution and consumption systems were studied. On the economical side, the parameters that drive the profitability of a PV investment were investigated.

Within process or manufacturing industries, the production of goods and services or the products themselves may have negative side effects such as pollution. An important task for environmental policy is to control and limit these pollutions, for example via regulatory measures. Although, the efficiency of such measures vary greatly between different industries and an increasingly important task for environmental policy is then to encourage companies to engage in environmentally motivated innovation. Governments can utilize other measures than regulation to indirectly decrease pollution. This thesis aims to analyze such activities and how it affects the innovativeness of wastewater treatment, refrigeration and automobile manufacturing industries.

Syftet med undersökningen är ta reda på vilken förståelse elever från årskurs 5 har för ljuskällans tekniska utveckling. Syftet har uppnåtts med hjälp av frågeställningarnaVilken kunskap visar elever i årskurs 5 om ljuskällans tekniska utveckling? och Vilken kunskap visar elever i årskurs 5 om glöd- och lågenergiglödlampan som komponent i ett tekniskt system? Metoden som valts är kvalitativa intervjuer och innefattar totalt tio olika djupgående intervjuer. Under intervjuerna har eleverna fått placera fem olika ljuskällor i historisk ordning, med hjälp av dessa bilder har de fått beskriva den tekniska utvecklingen för att tillslut hamna på elsystemet. Resultatet visar att eleverna har mycket god kunskap om ljuskällans tekniska utveckling och god kunskap om systemet bakom glöd- och lågenergiglödlampan.

The dissertation were performed on SP, Technical Institute of Sweden. The dissertation were carried out on the measurement technical department, this dissertation is a part of a bigger project, project ClampCal. One of SP?s returning assignments are flow-measurement. When flow-measurement is performed, the flow has to be stopped so that a meter can be installed in the pipes where measurement is going to take place. At every stop there is time delay in the flow which causes the customers to loose money. This is why SP wanted to find a better solution so that measurement can be done without any stops in the flow. Usage of a so-called Clamp-on meter was considered, but since the measurement uncertainty is too large it takes some investigation on the parts where the largest uncertainties occur and thus find a solution that can diminish the uncertainty as much as possible. The parts that were considered to have an opportunity to reduce measurement uncertainties were the fluid temperature, its characteristics and the pipe geometry and its characteristics. For the fluid temperature a Pt100-sensor with four different radii for various pipes was used.