This thesis examines the subject of change in public administration from an instrumental and an institutional structure perspective. The purpose of the thesis is to examine whether institutional structures affect the development of instrumental structures and if it in turn is possible to affect institutional structures by changing the instrumental structures. This case study is primarily based on a series of deep interviews with senior administrators and politicians within two new administrations in the municipality Karlstad, both which have been created by merging several smaller administrations, but also thorough analysis of several official document such as protocols from the municipal council meetings, Tja?nsterskrivelser and internal PMs.   The result of the analysis indicates that both institutional structures and the forming instrumental structures affect each other and  that their ability to affect each other depends on the dominance over the organization each structure has.  In my specific research case we can see that the institutional structure of the city-technical and housing administration has affected the outcome but the institutional structure of the cultural and tourism administration hasn?t.  While the structural change of the city-technical and housing administration hasn?t effected the institutional structure but the structural change of the cultural and tourism administration has affected the institutional structure of this specific administration..

This thesis analyses how a radiology department at the largest hospital in Sweden, Karolinska University Hospital, most profitably could expand its capacity for investigating cancer patients using magnetic resonance imaging (MRI). The queues today for patients waiting to be scanned are long, which delays the start of cancer treatments. Meanwhile the hospital has a budget deficit of half a billion SEK, which make any expansion hard. In this thesis we evaluate the alternatives of investing in new machinery; utilize the current machinery better by using them more days annually or through a shift work system. Finally we evaluate a combination of these.

Husums plant has a selection of different pulp pumps at bleaching plant 4 and 5. The displacement- (HC-pump, Sund Defibrator PTD-60) and centrifugalpumps (MC-pump, MCA 42-200, MCP 30/20) are of interest in this report. The centrifugal pumps are controlled by throttle valves, which result in an energy loss. Chemical mixers are used to mix ClO2 into the pulp before proceeding into a holding tower where the bleaching process occurs.The energy demand of the different positions has been measured or calculated to be used in comparisons against new equipment. Quotations were requested and delivered from Valmet and Sulzer.

Due to an increasing global market with a growing competition and an escalating technologydevelopment the demands on companies today are increasing. To maximise the output fromtheir recourses they need to be more efficient. The research on product development and how toensure the efficiencies in the process are extensive and companies could by adapting andimplementing the result of this research use its benefits.This master thesis is made for Knightec AB with the aims that through interviews anddiscussions with three companies investigate, collate, justify and give proposals for productdevelopment process together with supporting methods and procedures for technical projectmanagement. Besides Knightec AB three other companies located in Sweden has beenparticipating in this study. Through semi structured interviews and discussions in focus groupsinformation from the three involved companies were obtained.

This degree thesis is based on an assignment from BEOMAT in Storfors. BEOMAT is a company that constructs and sellsclay pigeons to both the national and international market.Our main purpose with this paper is to find a solution/system that can replace the expensive and space demandingOlympic trap facility. Our solution will replace fifteen clay pigeon throwers with one automatic thrower whosimulate all throwers together. The system will be provided with an appropriate control system for mass productiontherefore this system needs to be user-friendly so no previous knowledge is required.Totally 405 different throw coordinates will be stored in the programme in nine different subprograms. According tothe Olympic-rules the throwers should coincidence within certain specified conditions, this will be solved with anrandomizer in the programme.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

Laser for material processing possesses a number of advantages which mean that it has been and will be an important component for a wide range of industries' future development. Cutting materials processing is the dominant use of laser technology and has revolutionized the manufacturing industry. The aim of this thesis is to describe the principles of metal cutting by laser, how laser cutting is applied in practice and to identify how Swedish companies are using laser cutting. For the theoretical and technical description of laser cutting literature studies are the primary source of information. The empirical basis for the mapping of the Swedish industry for laser cutting is grounded on a survey; this includes Swedish companies that use laser cutting in their production.

An Interoperable Fare Management system for public transport has been a struggle for the actors in industry of public transport. A lot of effort has been put into creating a smart card solution that enables the travellers to use the same card for paying and holding the ticket regardless geographical position in Sweden. That project has failed, mostly due to a lack of taking non-technical actors and aspects into consideration during the project process. This thesis highlights the major actors and their responsibilities. The ARKTRANS framework is used as analytical tool to identify different roles. Throughout the thesis a sociotechnical perspective is used. The developed method in this thesis is suitable for mapping of actors and responsibilities in a network surrounding a complex technical system.

Ett Film som projekt, en film om ljud, en film om ljudet i film. En film inspelad professionellt med professionella medarbetare. Kandidatarbetet gick ut på både skapa en film inriktad på ljud och skapa ett fungerande filmteam. Arbetet tar upp både det tekniska inom filmljud men även processen i ett filmteam. I arbetet följer vi processen från dess början till dess slut.

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

Arbetsplatsernas ständiga utveckling och förändring har lett fram till ökade psykosociala krav från de anställda som företaget måste bemöta. Ska man bedriva ett hälsofrämjande arbete bör hänsyn tas till hur kulturen ser ut på arbetsplatsen. Samlade värderingar och verklighetsuppfattningar kring hälsa skapas när individer samverkar med varandra och omvärlden, detta kallar vi ?hälsokultur?. Syftet med studien är att beskriva hur hälsokulturen ser ut på ett företag och vilka möjligheter och resurser som finns på företaget för att utveckla denna.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Different techniques for precision agriculture have been available during the last decade. Some of them are more widely used than others. The main purpose of this thesis was to investigate the different attitudes to precision agriculture that exists among farmers and advisors in Sweden. Eight advisors and sixteen farmers were asked for their opinion of a number of specific techniques for precision agriculture, such as yield-mapping, precision liming, the Yara Nitrogen Sensor and site-specific fertilization with phosphorous and potassium. They were also asked to describe the way in which the counselling in Swedish agriculture is used and also about it's importance for the adaptation of new techniques. The high costs are mentioned to be one of the most important reasons why precision agriculture hasn't been more widely spread. Several farmers refer to their farms as too small to bear the costs that come with the techniques. The individual interest for technique among the potential users plays an important role.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Med ökad fokus på miljöpåverkan och bränsleekonomi vill Volvo Construction Equipment öka verkningsgraden på sina anläggningsmaskiner. På avdelningen för drivlineutveckling jobbar man bland annat med att sänka förlusterna i växellåda och hjulaxel på hjullastare och dumper. För att underlätta detta arbete har en simuleringsmodell som beskriver förluster i hjulaxlar tagits fram. Denna rapport beskriver framtagning av modellen, verifiering av modellen och vilka framtida användningsområden modellen lämpar sig för.Simuleringsmodellen är uppbyggd av ett antal komponentmodeller. Komponentmodellerna innehåller formler för respektive komponent i hjulaxeln.