ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

A well-planned grave with a sustainable selection of plants facilitates easy maintenance for both staff and the holder of the right of burial. It also helps reduce the negative impact on the environment.As in many other areas, the environment is high on the agenda within the cemetery administration. One of the major concerns is the impact of the choice of plants for the grave. Within the industry there is a great motivation and willingness to adapt to a sustainable work mode and this has spawned a number of project works. In autumn 2009 the partnership project, ?Environmental aspects of planning and maintaining graves?, was started in Movium (at The Swedish University of Agricultural Sciences).

This paper exemplifies how the physical environment affects clients? experienced service quality and how companies work with the physical environment. In the empiric study, we conducted a case study and studied two hairdressing saloons. The study showed a connection between physical environment and experienced service quality in the business of hairdressing. Owners of hairdressing saloons perceive that a combination of the personal meeting and the physical environment influence the clients? general impression and their experience of quality.

This study deals with teachers ideas about the physical environment of a mobile preschool and how it affects children?s learning. The essay describes how the preschool bus is decorated and how a normal day works in the mobile bus. The survey was based on the following questions:Are there disadvantages and advantages in terms of physical environment in the mobile preschool from an educator based perspective?What are the teacher?s thoughts about the impact on children?s learning in terms of the physical environment on the bus?Summary: To answer my questions I have participated in activities during the day and I have used the interviews to find out the teachers thoughts.

In recent years, the penetration of new players on the telecom market hasdrastically increased the work pace, affecting both design and production. Inthis report the technical and economical potential of a DC/DC converterplatform is investigated, in order to shorten the time of the design process.This is done in comparison with the present discrete type designs. PowerIntegrations offers a product, the DPA-Switch?, enabling this.By developing a wide DC/DC converter platform based on the DPA-Switch?,many advantages are gained. The component count is decreased by up to48 % and the yield increases by up to 2.9 % which in all yields a costreduction by up to 43 % or ?390 000 for 100 000 manufactured units.

Abstract  The purpose of this essay was to study understandings, determine the meening of a good learning environment in the school class, and how teachers and principal can contribute to it. On the basis of existing research that says: the common attitudes and standpoints between the school management and the teachers, is fundamental in case a good learning environment will occur in the classroom, the study has analyzed if the principal?s and the teacher?s attitudes in this study, are the same. The study is based on four main questions:  What is a good learning environment, according to teachers, principal and existing research?  How can teachers and principal contribute to a good learning environment, according to teachers, principal and existing research?  Do the teacher?s and principal?s attitudes concerning what defines a good learning environment, agree?   Do the teacher?s and principal?s attitudes concerning how teachers and principal can contribute to a good learning environment, agree?  To reply to the purpose of the study, five qualitative interviews were made. The interviews were done with five teachers and one principal, working in the same school. Research and litterature of interest, has been read, and these are presented in this essay. The study result shows that the existing research gives a wide definition of what a good learning environment is, and how a teacher and principal can contribute to it.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

In this study, we investigate various lighting applications in a virtual environment, where we compare between light based in naturalism (natural light) and pictorialism (artistic light). The purpose of this study is to gain further knowledge in lighting, which is increasingly important for game graphics. Theory are examined to gather information and recommendations on how to use various light settings that convey different emotions. We then use this information to illuminate the environment that we have built. The environment is presented in Unreal 4 for respondents who are allowed to move around freely in the environment.

The construction industry accounted for 19 % of all work-related fatalities in Sweden between 2010 and 2013. The exam report has been done to find out what underlying causes there are to the high number of fatalities and to the occupational statistics of the construction industry. Moreover it has been reviewed what improvements can be done to reduce accidents and fatalities in the construction industry. The report consists of a survey of statistics, laws and regulations affecting the work environment and of literature concerning the subject. It has been conducted an interview and a questionnaire survey at the construction company Asplunds Bygg and an interview with an inspector from the Work Environment Authority.

In this paper we have theoretically built a house designed for people with impaired mobility. Theessay begins with an introduction in which the purpose of the work, the methodology and thedepth-research part is presented. Then the layout that explains how we intend to adapt the housefor the demands detailed in the depth-research part is presented. In the same chapter variousstructural components, such as different floors and walls, are specified.In the selection of materials we have taken into account the criteria of our specialization andadaptation to the aesthetic aspects, where we evaluate materials based upon our wishes regardingtechnique and form. There are also other aspects that are important in the selection of materials,including that these are adapted to technical traits of the construction elements and installations.In a later chapter the technical installations such as ventilation systems, heating systems,electricity and sanitation are presented, where both technical and financial aspects are describedin detail.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

This study includes several purposes which are to describe the concept of working environment, explain who is responsible for its functioning and how the working environment should look like. Other purposes the study have is to investigate how the working environment is in both Swedish and the two investigated companies construction sites and to share some operators proposing measures for the shortcomings and problems that exist in the construction sector working environment. To achieve these purposes was a qualitative study made with unstructured observations, interviews and survey where three construction sites were observed. The result shows that the concept of the working environment cover many aspects and is essentially about the environment we live in and experience in our work and this environment can be both an indoor as an outdoor environment. In this work, the concept is divided into four areas; it is the physical, the ergonomic, the psychosocial and the chemical.