The way we design our cities today will affect the living conditions for future generations. Planning as a discipline can become crucial to attain a sustainable urban development with an increased quality of life among the urban population and an improved environment. Urban Agriculture in the Sustainable City -a case study in Managua is a Diploma Work that deal with poverty issues, aspects of sustainability and development work. We have had a theoretical starting-point, but our focus has been on the case study i.e. the practical part, that we carried out in Managua, the capital of Nicaragua. Today about half of the worlds 6,3 billion people live in cities. The demographic growth of the countryside has declined, while the population in the cities is considerably increasing.

Today an increasing number of schools and organizations are investing in so called Learning Management Systems. Researchers disagree on the pedagogical value of these tools. Some mean that Learning Management Systems cement old-fashioned behaviouristic teaching practices; others mean that the systems provide good opportunities in supporting learning in a socio cultural perspective. The aim of this study is to reach better understanding and increased knowledge of how the introduction of a Learning Management System influences the role of the teacher and how the learning is organized. We have conducted two case studies.

During the past few years an increased attention has been paid to environmental issues in the construction and property sector in Sweden. In order to simplify the work with these issues a Swedish environmental certification system for buildings called Miljöbyggnad has been developed. This thesis aims to investigate the opinion of a selected number of selected property owners of Miljöbyggnad. From that basis recommendations and actions for the future work with the system will be presented.The investigation has been conducted through personal interviews with five property owners. The main issues that the interviews have been based on are their purpose, experiences, perceived complications and future prospects in terms of certification using Miljöbyggnad.The system intends to be cost-effective, simple and to offer a relevant environmental assessment of buildings and the result from the report indicates that this is largely fulfilled.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

One of the main tasks of the Swedish Armed Forces over the past few years has been International assignments, which increased the importance of the Lessons Learned process. Methods of simulator training with computers have become more frequent and the technical ability to collect digital data from sensors has been developed as well. This work demonstrates how the experience of Lessons Learned can be communicated with the computer simulator StriSimPC and how modern technology in future support experiences from the Lessons Learned process at the tactical level in the Army.Currently knowledge sharing consists of several processes and strategies in the Swedish Armed Forces. This is done by written reports, oral presentations and different practical exercises.This case study shows the functions of the simulator StriSimPC, methods of training and how it is used today. The study also describes the future opportunities, where digital metadata acquired from the modern combat vehicles could contribute sharing of experience in the Lessons Learned process.The summarized conclusions indicate that StriSimPC can combine the two strategies for personalization and codification of knowledge transfer to reach a higher level of learning.

Detta examensarbete utfördes på Saab AB, Support & Service, i Tannefors, Linköping, samt vid Institutionen för datavetenskap på Linköpings universitet. Ett moment i kvalitetsarbetet för komplexa industriprodukter, som till exempel flygplan, är att skifta från tvådimensionellt konstruktionsunderlag till tredimensionellt. Tredimensionella modeller har funnits i flera år. Nackdelen med dessa modeller är att de inte kunnat bära någon extra information, förutom den information som krävs för att de ska vara uppritade. Tekniken har gått framåt och nu går det att lagra teknikinformation i modellerna samt göra simuleringar som inte gått att göra förut.

The essay deals with the understanding of the two key concepts from Sein und Zeit (SZ) mentioned in the headline, including a debate on the issue of das Man in Inquiry: an Interdisciplinary Journal of Philosophy. It is noted that reading SZ involves being simultaneously written by the work in a process of reciprocity; this entails a questioning of alleged possession of this or any work, it having been made accessible to the public by its publication.Das Man, as a concept for inauthenticity, needs a counterpart for authenticity, which in SZ is provided by Eigentlichkeit, Self-ownership.This comes into existence via ?being-towards-death?, where the caring being, as a being of possibilities, encounters its ultimate possibility death which is also the end of possibilities.The Inquiry debate, the main contenders of which were Hubert Dreyfus and Frederick Olafson, hinges on the question whether das Man should be understood primarily as ?at bottom a deformation of Mitsein? (Olafson) or ?the conformity necessary for the institution of collectively intelligible social practices (Dreyfus, in the words of his advocate in the debate, Taylor Carman). Both sides, however, give evidence of misreadings of SZ of a kind that call for an explanation. The proposal is that this could be given in an analysis of such a rhetoric of polemics that transforms SZ into a state of Vorhandenheit when making it an object of investigation by the contenders rather than such a tool for being-changed that is mentioned above.The relation between the two aspects of das Man, as oppressive know-all or as forms of established truth for Dasein, remains unsolved, however.

One of the city of Stockholm?s main objectives is to have a society completely free from fossil fuels. To achieve this, several investments regarding improvements in energy efficiency and renewable energy are currently being planned or implemented. One of these investments is a project called Hallbara Jarva which is located in the suburbs of Stockholm. The purpose of this thesis is to examine the prospects of an investment in photovoltaic cells from an energy-saving and economical point of view. The analysis is limited to three buildings within Hallbara Jarva and is intended for the property owner.  Solar energy is a type of renewable energy source and is commonly divided into solar heating and solar power.

This report consists of a discussion about suitable methods for studying complex sociotechnical systems that are still being developed. There are large economical advantages with studying new systems before they are completely developed since problems can be discovered early and thereby avoided. It is, however, difficult to study developing systems, there are methodological limitations. These limitations are discussed and recommendations for studying non-existing complex sociotechnical systems are presented.The report is based on experiences from a study of the introduction of a shipboard helicopter on the corvettes that the Swedish Armed Forces are developing. A shipboard helicopter implies high requirements on the hosting ship.

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

The world's natural resources are constantly being reduced, which increases the pressure on companies to actively engage themselves in environmental activities. Meanwhile, stakeholders focus is being broadened and it is now important not only to supply a particular product or service but also show that they are actively pursuing an environmental agenda. Companies can use various tools to aid in environmental efforts, but also to demonstrate to the world that the company is actively engaged in environmental activities. One such tool is the environmental standard ISO14001 which provides the company with guidance and support on how the business must manage its environmental efforts. To show a business' progress in environmental performance, it is advantageous to use environmental performance indicators as they enable stakeholders to easily understand how the business works with environmental issues.Authors in the field explain that the environmental management system propagation is limited in service organizations.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

The name of the thesis is?Istheprintedbook?sdeaththeauthorsbread??Astudyinhowthepublishinghouses?andtheauthors?relationshipschangeduetotheintroductionofthee--?book?Thee--?book,whichisadigitalcopyoftheprintedbook,hasbeenonthemarketforovertwodecades.However,itisnotuntilnowthatchangesarehappeningwithintheindustry,whichaffectsthedifferentactors.Amazonhasforexamplelaunchedane--?readerbythenameKindleonthemarketandApplehaslaunchedasurfpadbythenameiPad,bothwhichyouareabletoreade--?bookson.Thetechnologicalchangesthatarehappeningaffecttheactorswithinthebookindustryaswellasthestructureoftheindustry.Theresearchquestionofthisthesisis?owdothepublishinghouses?andtheauthors?relationshipswithinthebookindustrychangeduetotheintroductionofthee--?book??Actor--?networktheoryisusedtoinvestigatethis.Thetheoryincludesbothhumanandnon--?humanactors,whichtogethercancreateanetwork.Theactorswithinthenetworkconnectthemselvestoeachotherandtherebyformthenetwork.Thepurposeofthisthesisistocreateanunderstandingforhowactorsandtheirrelationshipswithinanestablishedindustrystructureareaffectedbydigitalisation.Toachievethis,semi--?structuredinterviewswereconductedwithpublishinghousesandauthors.Theboomofthee--?bookinlargepartdependsuponthetechnicaldevelopmentthathasoccurredandwhichhasintroducedsmartphones,e--?readers,surfpadsetceteraonthemarket.Moreactorswillariseinthebookindustryduetothedigitalisation,whichinturnwillaffecttheexistingrelationshipsofthepublishinghousesandtheauthors.Thepublishinghouseswillkeeptheirroleinthenetworksasakeyplayer,butcomeintocontactwithmoreactors.Theauthorsaregiventhechancetoself--?publishtheirbooksase--?books,whichmakethemcomeintocontactwithmoreactorsaswell.Asmoreactorsarise,thestructurewithintheindustrybecomesrelaxed.Hence,thepublishinghousesneedtoenrolthenewactorsinorderforthemtokeeptheirpositioninthenetwork..

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.