SJ is a government-owned passenger train operator in Sweden. SJ currently uses asystem called Ford for control and monitoring of maintenance. Technical andorganizational factors have given Ford the character of a monolithic system withoutflexibility and conditions to meet SJ's increased requirements.The main purpose of this master's thesis is to investigate how data quality can bedefined at SJ and to examine the data quality in Ford. This will give SJ an indication ofwhat their quality efforts should focus on in the future.The technical data quality parameters found are: accuracy, timeliness, completenessand consistency. The user centred data quality parameters are: accessibility,understandability and reliability.

This Master Thesis discusses the development of bids for regulation power with consideration of change of discharge. The study was initiated by Vattenfall PD and is a limited part of a substantial development project at the same division. The background of the project is the new demands from SvK, which among other things includes more detailed regulation bids. As from the 1st of November 2008, the regulation bids are supposed to be calculated regarding each specific regulation object, something that is defined by SvK. These new demands changes Vattenfall?s conditions and will increase the need for detailed knowledge about available regulation power and costs for regulation.In this study a strategy for regulation bids was developed.

This paper aims to explore the phenomenon urban wind energy, its visual effect on built environment and the factors that affect the opinion towards new elements in the city. A place study of the city Gävle serves as a complement to the theoretical part of the paper. The theoretical discussion opens with an account for the technical and economical conditions of urban wind energy. It presents the technical basics, different types of turbines and a discussion occurring wind related techniques in built environment. Today, the knowledge of how the wind moves and acts in the rural landscape is quite good.

AbstractBackground: The company that this report addresses is, at time for investigation, in the midst ofa change in organizational culture, where two departments with different core competencies arebrought together into one. The purpose of this study is to review the potential problems that mayoccur in the change process when one or more subcultures come into conflict with organizationalgoals.Purpose and methodology: The reason for performing this study and the objectives are toexamine how subcultures influence and respond to organizational changes. The survey isconducted with a bottom-up approach in which participation in daily activities with thesubgroups is the foundation. The management's perspective has been omitted in consideration ofpast literature in the field where focus most often has been on their thoughts and views on theprocess of organizational change. The method used is participant observation and interviews.Results and Conclusion: Subcultures exist and they do affect an organizational change.

Working life changes, just like the rest of today?s society, at an accelerated pace. It is through changes and challenges that human beings develop, personally and professionally. Changes are often met by resistance. The purpose of this study is to see how different factors influence individuals? experiences of change.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

The purpose of this thesis is to investigate if there are environments that use some kind of central authentication system within institutions/schools. The hypothesis is that an institution not using a form of central authentication service has more need for maintenance and as such is considered a higher cost for the organization. The gathering of data has been done through interviews with technical personal at Blekinge Tekniska Högskola and Linköpings Universitet. Based on the technical background of the authors, and the system limited to discussing Windows and UNIX operating systems, a discussion and analysis of the systems working today has been done, with emphasize on the hypothesis..

This paper aims to study the Armenakis´ theory of readiness, "are they ready?", which consists of five key components affecting the outcome of an organizational change. In this case study, the intention is to investigate if any component is important; alternatively if it is possible to discern a pattern between components, i.e. how they correspond to each other. During the past 30 years have a research group lead by Armenakis has studied organizational change and how resistance to change can be avoided by preparing employees in the introductory phase of change. The main object for Armenakis is the question "what determines whether the employees (change recipients) adopt and support, or reject and resist a change".

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This paper aims to study the Armenakis´ theory of readiness, "are they ready?", which consists of five key components affecting the outcome of an organizational change. In this case study, the intention is to investigate if any component is important; alternatively if it is possible to discern a pattern between components, i.e. how they correspond to each other. During the past 30 years have a research group lead by Armenakis has studied organizational change and how resistance to change can be avoided by preparing employees in the introductory phase of change. The main object for Armenakis is the question "what determines whether the employees (change recipients) adopt and support, or reject and resist a change".