I studien har jag ställt frågorna; vad är masskommunikation och hur kan den beskrivas? Vilken väg transporteras en händelse i massmedias infrastruktur? Ambitionen är att undersöka hur masskommunikationen fungerar, därför har tre specifika händelser valts ut för att studeras. Teoretiskt utgår studien ifrån ett mediefilosofiskt synsätt i en postmodern tradition med medieteori av McLuhan, Baudrillard och Bourdieu. Undersökningen har genomförts med kvalitativ fallstudie. Tre händelser har identifierats och kategoriserats i empirisk, definitiv och producerad händelse.

Virtual Design and Construction (VDC) is currently used more and more within construction design and planning as well as construction as a streamlining tool aiming to improve communication and decrease the number of construction defects. VDC is constantly developing, but what comes next? The augmented reality (AR) technology is currently not used within construction in Sweden but should be considered as the next step in line regarding the integration of reality and digital information. Using this technology design can become reality even before it?s actually built.The purpose of this study has been to carry out an inventory of the existing AR technology and its shortcomings, and also to identify possible applications within the construction phase.

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

This master thesis is about Augmented Reality (AR), a phenomenon that has existed since the mid-fifties but only recently has become available for the general public. This report is a knowledge compilation about AR, focusing on AR in cell phones and the use of the technology in traffic related situations.AR is usually described as adding a digital layer of information onto the real world. There are different technologies to make virtual images; in cell phones sensor-based and camera-based technologies are the most common ones.In this report, the market of AR applications for cell phones has been investigated. Three use cases have also been investigated in order to get more knowledge about the designers' thoughts and visions.In order to analyze the technology and the applications in a broader and more scientific perspective, two theories has been used: Situation Awareness (SA) and the Service Dominant Logic (SDL). These theories seem useful when reflecting on the Swedish road administrations vision, and to investigate what the applications and the AR technology can contribute to the traffic domain.The conclusions of this thesis are that:- AR can be applied on most of the human senses, but augmenting by visualization is most common.- The market for cell phone applications is growing rapidly: AR applications are relatively new but on the rise.

A growing need to strengthen ones position on the market, even as a city in competition with other cities, has resulted in an increasing number of municipalities developing brand platforms. When the city of Umeå developed their platform, they identified decision makers and investors as one of four important target groups.The aim of this study is to explore the portrayed image of the city of Umeå in two Swedish trade journals which addresses the specific target group decition makers and investors in both public and private sector. The aim is also to compare the image of Umeå in the two papers, to the ambition of the municipality, expressed in the brand platform.In order to make the observations as firmly established as possible, the method of the study is a combination of a quantitative content analysis and a qualitative text analysis. The study draws on the theories of Eli Avraham and Philip Kotler, concerning how to improve city images and how to market a specific city among others. The study shows that the city of Umeå in large extent is portrayed in accordance to the ambition which the municipality expressed in the brand platform.Umeå is displayed as an expanding city.

A growing need to strengthen ones position on the market, even as a city in competition with other cities, has resulted in an increasing number of municipalities developing brand platforms. When the city of Umeå developed their platform, they identified decision makers and investors as one of four important target groups.The aim of this study is to explore the portrayed image of the city of Umeå in two Swedish trade journals which addresses the specific target group decition makers and investors in both public and private sector. The aim is also to compare the image of Umeå in the two papers, to the ambition of the municipality, expressed in the brand platform.In order to make the observations as firmly established as possible, the method of the study is a combination of a quantitative content analysis and a qualitative text analysis. The study draws on the theories of Eli Avraham and Philip Kotler, concerning how to improve city images and how to market a specific city among others. The study shows that the city of Umeå in large extent is portrayed in accordance to the ambition which the municipality expressed in the brand platform.Umeå is displayed as an expanding city.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

This work of examination describes an environmentally oriented product development aimed to develop new packaging with improved environmental and sale aspects of the products from Primus Sweden AB. The report covers the design process from the first collection of facts to the final results with a description of all methods involved in the work. The focus has been on a clear environmental awareness and the report contains a deepening of the concept life cycle assessment (LCA) for product development. In the process, the consumers? opinions of the brand Primus and environmental profiling formed the basis for the packaging to communicate the right values such as quality, technology, environmental awareness and adventurer?s first choice.The deepening of the life cycle analysis shows that composting and other alternative treatment of the biological cycle is not possible to implement in a satisfactory way in the design process.The work results in two final concepts.

With recent technical development computer aided design and manufacturing has taken amore important role in the product life cycle. New business segments such as Product/ServiceSystems and remanufacturing is emerging. This development demands better control of theproduct data throughout the entire product life cycle. Computer aided design is widelyrecognized and used within the manufacturing industries and in recent years the importance ofDigital manufacturing has increased. One part of Digital manufacturing is paperlessproduction which involves all orders and working instruction shown for example on a screenrather than on a piece of paper.