Understanding how innovation and renewal occurs in an industry is important for how to manage technical development for individual companies. It is also important for creating a beneficial industrial context for renewal, from both a political and an industrial perspective, in which new solutions can arise and spread through the involvement of several actors of the industry. How innovation and renewal occurs in the construction industry in Sweden is however viewed differently. One challenge that has been pointed to is that most of the work performed in the construction industry is organized in projects, which in turn should affect how innovation and renewal can be achieved. The aim of this thesis is to provide an understanding of how the project organizing in the industry affects innovation and renewal. This is executed through a case study of the construction of Skandionkliniken, a proton therapy clinic, and by using an industrial network theory that challenges the traditional view of how innovation is achieved.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This paper is based on a literature review and interviews made with managers in small-scale nurseries for pot plant production. The review helped to identify the worst occupational hazards in pot plant production. The interviews provided a way to investigate how the nurseries act so as to avoid the worst hazards and what they do to even out work intensive periods during the season in order to get a more even distribution of work over the year. According to available statistics problems with back and shoulders are the most common of the physical disorders and the risk for occupational accidents are high for greenhouse workers. Most of the occupational injuries are connected to musculoskeletal problems. The handling of material is often manual and involves frequent lifting and carrying of heavy loads, the strenuous work postures and static muscular tensions these repetitive tasks are associated with causes straining and overloading.

This study focuses on a specific organization of a Security Operations Center (SOC) as a case studyto first identify specific challenges related to the work process, preceding with identifying whichprinciples from various process models, such as agile and traditional methodologies from softwaredevelopment companies, can be implemented. Initially, the study presents relevant research on agile and traditional process models as well asresearch on SOC. Subsequently, six semi-structured interviews are planned and conducted withemployees within a specific SOC-type organization to identify the current work process and thechallenges affecting the organization?s work process. The results of this study indicate a description of the current work process in the organization aswell as a variety of challenges related to technical and organizational issues.

The study aims to investigate the feasibility of small-scale electricity production with solar electricity systems, also known as PV (photovoltaic) systems, in Australia. Due to the global warming, sustainable energy has in recent years become an increasingly important issue, both internationally and in Australia. With one of the largest dependencies on fossil energy sources in the world, the country's abundant solar radiation is a possible solution to this issue.Both the technical and the economic feasibility of small-scale PV systems were investigated. On the technological side, the electricity generation, distribution and consumption systems were studied. On the economical side, the parameters that drive the profitability of a PV investment were investigated.

Within process or manufacturing industries, the production of goods and services or the products themselves may have negative side effects such as pollution. An important task for environmental policy is to control and limit these pollutions, for example via regulatory measures. Although, the efficiency of such measures vary greatly between different industries and an increasingly important task for environmental policy is then to encourage companies to engage in environmentally motivated innovation. Governments can utilize other measures than regulation to indirectly decrease pollution. This thesis aims to analyze such activities and how it affects the innovativeness of wastewater treatment, refrigeration and automobile manufacturing industries.

Syftet med undersökningen är ta reda på vilken förståelse elever från årskurs 5 har för ljuskällans tekniska utveckling. Syftet har uppnåtts med hjälp av frågeställningarnaVilken kunskap visar elever i årskurs 5 om ljuskällans tekniska utveckling? och Vilken kunskap visar elever i årskurs 5 om glöd- och lågenergiglödlampan som komponent i ett tekniskt system? Metoden som valts är kvalitativa intervjuer och innefattar totalt tio olika djupgående intervjuer. Under intervjuerna har eleverna fått placera fem olika ljuskällor i historisk ordning, med hjälp av dessa bilder har de fått beskriva den tekniska utvecklingen för att tillslut hamna på elsystemet. Resultatet visar att eleverna har mycket god kunskap om ljuskällans tekniska utveckling och god kunskap om systemet bakom glöd- och lågenergiglödlampan.

To self-archive is to make research publications freely accessible by depositing them in an open digital archive or on a public website. The aim of this thesis is to explore what Swedish scientists think of self-archiving, what they know about it and how they make use of it, in order to understand why they do not self-archive more actively.A web survey was conducted which was answered by 296 scientists at the Swedish University of Agricultural Sciences (SLU). Results show that only 24 % have previous experience of self-archiving, but that a majority is willing to self-archive if there are no legal objections or if it is demanded by the research funder. The most important reasons why many scientists do not self-archive are that they feel uncertain about copyright issues and/or lack knowledge about self-archiving..

The dissertation were performed on SP, Technical Institute of Sweden. The dissertation were carried out on the measurement technical department, this dissertation is a part of a bigger project, project ClampCal. One of SP?s returning assignments are flow-measurement. When flow-measurement is performed, the flow has to be stopped so that a meter can be installed in the pipes where measurement is going to take place. At every stop there is time delay in the flow which causes the customers to loose money. This is why SP wanted to find a better solution so that measurement can be done without any stops in the flow. Usage of a so-called Clamp-on meter was considered, but since the measurement uncertainty is too large it takes some investigation on the parts where the largest uncertainties occur and thus find a solution that can diminish the uncertainty as much as possible. The parts that were considered to have an opportunity to reduce measurement uncertainties were the fluid temperature, its characteristics and the pipe geometry and its characteristics. For the fluid temperature a Pt100-sensor with four different radii for various pipes was used.

A vulnerable group in society is people with ASD (autism spectrum disorders) or autism. This group seems to increase, mainly due to genetic factors but also environmental problems. Medical research has accelerated in the U.S. and Europe. The biggest problem for people with disabilities is the inability to communicate, both verbally and socially.

In today's producing companies, there is a high demand on early integrated productdevelopment. One way to facilitate communication between departments and collaborationbetween people and thereby enable early sharing of product information within the companyis to use PLM, Product Lifecycle Management.The CAD environment at Scania is at the moment being upgraded from Catia v4 to Catiav5. In this stage it is important that also the interacting computer systems in Scania?s PLMenvironment are adjusted and in the future join the development. Scania has an idea of howthese systems will be developed as the transition from Catia v4 to Catia v5 is being carriedout.

The purpose of this thesis was to investigate if Swedish agencies preserve their websites according to the Swedish archival legislations and guidelines. As a theory the OAIS Reference Model (Open Archival Information System, developed by US Consultative Committee for Space Data Systems, CCSDS) has been used as a model to show how important it is to develop strategies for public digital information which has to be preserved for long term. The ingest function in the OAIS Reference Model demands that files are prepared for long term preservation and requires that the digital information fulfils established technical requirements.In the study the Swedish National Archive and their advices about preserving websites to archivists on the Swedish agencies are being studied. To control if the agencies meet the requirements for their management and preservation of their websites a survey was sent out to investigate if Swedish agencies preserve their websites. According to the survey result, 84 of 113 agencies preserve their websites in some way. If the technical requirements really was met could not be verified in this thesis, the results was relied on the responses from the authorities.

The first law in Sweden containing an act of legal deposit is from 1661. Since then the printing-houses are supposed to deliver all printed material to the Royal Library and other recipient libraries. Today, more and more information is solely published electronically. This material is not yet included in the law of legal deposit. In a similar way as our printed cultural heritage is saved for posterity our electronic cultural heritage has to be saved.

We are living in network society, where information and communication together with the technical development stands in the centre. Characteristic for network society is quick changes, new meaning of time and space, convergence and new possibilities of communication. Network society contains new technical developments, several with thepurpose to improve the possibilities of communication between human beings, which in some ways creates new social demands and expectations. In this study, I focus on the Internet, which is an important channel for the information, communication and marketing in network society. As whole network society, the Internet is constantly developing.This study, implemented with qualitative interviews, has the purpose to give new, deep and interesting knowledge about business to business companies? communication and marketing on the Internet.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.