Three-dimensional computer graphics enjoys a wide range of applications of which games and movies are only few examples. By incorporating three-dimensional computer graphics in to a simulator the simulator is able to provide the operator with visual feedback during a simulation. Simulators come in many different flavors where flight and radar simulators are two types in which three-dimensional rendering of large terrains constitutes a central component.Ericsson Microwave Systems (EMW) in Skövde is searching for an algorithm that (a) can handle terrain data that is larger than physical memory and (b) has an adjustable error metric that can be used to reduce terrain detail level if an increase in load on other critical parts of the system is observed. The aim of this paper is to identify and evaluate existing algorithms for terrain rendering in order to find those that meet EMW: s requirements. The objectives are to (i) perform a literature survey over existing algorithms, (ii) implement these algorithms and (iii) develop a test environment in which these algorithms can be evaluated form a performance perspective.The literature survey revealed that the algorithm developed by Lindstrom and Pascucci (2001) is the only algorithm of those examined that succeeded to fulfill the requirements without modifications or extra software.

This project is the result of a cooperation between HalmstadUniversity and EABAB. The aim of the project was to create a macro that would help EABAB automate the process of designing steel trusses. When run in Microsoft Excel, the macro imports and processes coordinates from a calculator program. The data is then imported into the Building Information Modelling software Tekla Structures, which creates a 3D structural model of the steel truss.The macro saves much time in the project planning process and also helps minimize the risk of design flaws caused by human error. .

Syftet med följande studie var att undersöka hur olycksanalysmetoderna CREAM och DREAM kan anpassas till sjöfartsdomänen, samt hur begreppet den mänskliga faktorn kan beskrivas och hur kan den analyseras. Teoristudier samt intervjuer med anställda vid sjöfartsinspektionen och domänexperter har genomförts. Ett förslag på hur en anpassad analysmetod skulle kunna se ut redovisas som BREAM (Bridge Reliability and Error Analysis Method). Den anpassade metoden har utvärderats med hjälp av experter inom domänen. Utvärderingen visar på att metoden fungerar bra men att ytterligare specificering av metoden till domänen är önskvärt..

As emission legislations across the world continuously pushes engine development forward,engineers constantly need to come up with and implement fuel saving technologies. During thelast decade, variable cam phasing has become a popular solution to increase gas exchangeefficiency. This configuration is typically mechanically constrained by camshaft limitations, anda solution to circumvent this problem would be to use a different valve actuation principle.One example of this is to use pressurized air controlled by electrical solenoids. Such a systemhas been developed byCargine Engineering and this provides the starting point for this work. Tobe able to operate the valvetrain on an actual engine, a control system is needed.

The purpose of this essay is to acquire variables that explain and may be used as a base for wage estimation in the private sector in Sweden. The factors that are assumed to have an impact on wage estimation are based on earlier Swedish and international studies. Business survey data, which is based upon monthly questions to firms in various sectors of the Swedish economy posed by the Swedish National Institute of Economic Research, will be analyzed to find out weather they have an impact on Swedish wage settings or not. Tests including business survey data are yet rarely frequent, why this essay will be some kind of a pioneer within the area. To estimate significant factors that influence wage setting in Sweden, three different wage equations have been modeled and tested with a regression model.

During the 1970?s the interest for quality management and the concept of quality costs increased considerably. Business leaders noticed that there was a great potential for reducing costs of poor quality. Since up to 10-30% of a company?s total turnover may consist of poor quality costs some consider them as an unexploited goldmine.

One problem in today?s indoor air quality lies within insufficient ventilation. Dynamic ventilation can be obtained by implementing a Demand-Controlled ventilation (DCV) system. DCV systems adjust the ventilation in a building by calculating the impact made by its? occupants.

Because of new emission and on board diagnostics legislations, heavy truck manufacturers are facing new challenges when it comes to improving the engines and the control software. Accurate and real time executable engine models are essential in this work. One successful way of lowering the NOx emissions is to use Exhaust Gas Recirculation (EGR). The objective of this thesis is to create a mean value model for Scania's next generation EGR system consisting of a poppet valve and a two stage cooler. The model will be used to extend an existing mean value engine model.

Since the 1980s, companies have taken a larger interest in quality and it´s economic impact within the company. Having the knowledge that it´s not quality that costs money, but it´s rather the lack of quality. The work immerses itself in the field of cost of poor quality and the development of key performance indicators.The thesis is performed at Bufab Holding in Värnamo. Bufab Holding is a trading company which mainly buys and sells C-parts. C-parts include fasteners, other small metal-, rubber- or plastic parts such as wires, springs and electronic fasteners.The aim of this thesis was to make a survey of the cost of poor quality and to find key performance indicators (KPI) for cost of poor quality that can be continuously monitored.

?Are the headwaters streams at the right position in the map? is a study that has been performed on behalf of Holmen Forest, region Örnsköldsvik. This study will be the basis for deciding if the Hydrology Layer Property map or Holmen Forest map will be used for planning nitrogen fertilization in forestry. The background to this study is that nitrogen fertilization near water will increase the risk of nitrogen leaching out into the water systems, which has a negative impact on the environment. The headstreams positions have been recorded in the field with a GPS and the data analyzed in the geographic information system ArcMap.

This thesis uses ten years of data to examine the underlying drivers behind changes in the taxi price, specifically we look at the relationship between the taxi price and changes in the underlying costs. We use a two-step error correction framework to investigate how changes in costs affect prices in the long run as well as in the short run. We also study if the price adjustment process is asymmetric. Furthermore, we examine if price discrimination exists on the taxi market in Stockholm. We find that in the long run the pass-through effect is almost complete, whereas in the short run prices are considerably less sensitive to cost changes.

In this report a model was constructed in order to determine how a number of covariates influence the gross domestic product, GDP. The covariates were chosen depending on their expected influence on GDP, for example education and life expectancy. The data used in this report are collected from the World Bank. The model to describe GDP has been calculated using multiple line arregression. In order to reach a reliable final model the number of covariates has been gradually decreased to eliminate insignificant covariates.

The purpose of this thesis is to shine some light on how B2C companies in Sweden carry out a viral marketing campaign. Through case studies of two comparably sized companies, Arla and If Skadeförsäkringar, this was examined. This study shows that viral marketing is still a new subject for both marketers and researchers. It is hard to find conclusive methods for how to carry out such a marketing campaign successfully leaving companies feeling that they first have to go through a trial and error process. This is evident in this case study, where viral marketing is degraded to a tool for generating awareness rather than producing actual results as part of a holistic marketing plan and where those results are too uncertain to rely on.

In previous contact with secondary schools, we have noticed a dull setting for friluftsliv among teachers in Physical Education and Health. We suspected that both teaching and assessment are sometimes conducted in error. Under the provisions of Skolverket the teacher must involve all elements mentioned in the core content of the curriculum and the assessment of students' knowledge may be based only on what is expressed in the syllabus for each course. Research shows that the implementation of the curriculum have failed in the subjects investigated (Skolinspektionen, 2013:22). We have identified a gap of knowledge regarding the situation of friluftsliv in the course physical education 1.

This project was intended to develop and improve my skills as an artist/designer. I have used inspirational sources and followedmy artist?s intuition to create something that is individual and a reflection of myself.My goal was to design 7-10 compositions and apply them to t-shirts and then create a photo arrangement with these t-shirts to make a strong artistic presentation.I chose to apply my images to t-shirts, because I feel that the tshirt is a perfect median to display pieces of art. My process has been very non-linear in nature. Trial and error,experimentation and my gut feeling have strongly influenced the progression of my design process and guided me to new ideas.I feel that with this project I have succeeded in fulfilling my goals to develop and improve my skills as an artist/designer..